PROVISION OF HIGH RISE STEEL STANDING PLATFORM TO WATER TANK AT ADM BLDG (P- 415) AND EXTENSION OF UNIT ARMOURY AND GUNNERY OFFICE (ADM BUILDING) AT CGAE GOA UNDER GE(I)(CG) GOA

Amount

SCH A PART- I [ PROVISION OF HIGH RISE STEEL STANDING PLATFORM TO WATER TANK AT ADM BLDG (P- 415) ] Excavation in trenches not exceeding 1.5 m wide and 1.5 m deep in soft/ disintegrated rock and getting out complete all as specified and directed.

M & L Plain cement concrete (1:3:6), type C2, 100mm thick, using 40mm graded trap stone aggregate as in sub base complete all as specified and directed.

M & L Plain cement concrete (1:2:4), type B0, 50mm thick, using 12.5mm graded trap stone aggregate as roof (above platform) complete all as specified and directed.

M & L Rolled sections Fe 410 -W (Gde- E- 250) quality- A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

S & F Plates (plain or chequered) channels Square cut or notched (ordinary and counter sunk) forming holes, without any attachment o FE -410W (Gde -E-250) Quality B complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, n exc 5cm long of 5 to 10mm diameter shank in mm complete all as specified and directed.

M & L 15mm thick plaster in cement mortar (1:6) on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and directed.

M & L applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M & L applying two coats of Synthetic enamel paints over a coat of red oxide zinc chrome primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and directed. Total Quantity:- 235.00 (SCH A PART-I) + 10.03 (SCH A PART-II) = 245.03 Sqm]

S & F Rotational moulded polyethylene water storage tanks of 2000 Ltrs capacity (cylindrical, vertical with closed top), three layered hoisted and fixed in position complete all as specified and directed.

S & F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F 25mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S & F for 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690 gms) complete all as specified and directed.

SCH A PART-II [ EXTENSION OF UNIT ARMOURY AND GUNNERY OFFICE (ADM BUILDING) AT CGAE GOA]- B/R ITEMS Demolition of brickwork /PCC blocksbuilt in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

Removing building materials etc. to a distance of 5Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed

M & L Pre-cast cement concrete Type C-1 1:3:6 (using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10cm in width and setting in 1:6 mortar complete all as specified and directed

M & F Rendering 10mm thick on fair prices of brick work with cement mortar (1:6) brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L Reinforced cement concrete nominal mix in 1:2:4 (using 20mm graded stone aggregate) for lintel beam complete all as specified and directed

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and directed

Ditto, but 6mm to 8mm dia complete all as specified and directed

S & F Powder coated aluminium frame for doors, windows, ventilators (including 2/3 track) with one or more rebates including joining cleat for fixing etc complete all as specified and directed

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed

S & F 4mm thick sheet glass ordinary quality, glazing with oil putty in square exceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.

S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. [Note :- The work is to be carried out above three story building height]

M & L Preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of alkali resistant primer over putty to match the surfaces complete all as specified and directed

M & L Preparing new plastered surface of walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm) complete all as specified and directed

M & L 25mm thick Plain Cement concrete type B0 1:2:4 (using 12.5mm grade stone aggregate) complete all as specified and directed.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded andjointed with grey cement slurry and pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing complete and including 20mm thick screed bed or bedding layer in Cement mortar (1:6) complete all as specified and directed.

M & L 20mm thick Granite (of any type) tiles machine cut (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match including grinding and polishing complete and including 15mm thick rendering in Cement mortar (1:4) complete all as specified and directed.

M & L 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 2nd class hard wood, Plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F Butt hinges 125mm, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed.

S & F 150mm Aluminium handles, cast type, anodised fixed complete all as specified and directed.

S & F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F Aluminium anodised,150mm barrel tower bolts of extruded section and fixed complete all as specified and directed.

M & L Applying two coats of Synthetic enamel paint over a coat of primer on wooden surface any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

S & F tubular curtain rod, 19mm dia of anodised aluminium alloy with fixing brackets etc as in door and windows curtains etc complete all as specified and directed.

Taking down wooden chowkhats/frame exceeding 1.5 Sqm each including wire mesh and fixing arrangement complete all as specified and directed.

Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed.

M & L framed work as in steel doors of gates of angles or other section with gusset plates, rails, braces, etc. Complete,conforming to Fe-410W (Gde-E-250) quality 'B', drilled for fixing of steel sheeting or other covering. Doors etc to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

S & F Mild steel plain sheet in 1.25mm thick covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc complete all as specified and directed.

S & F Aluminium body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M & L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M & L Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L Preparation of old treated plastered surfaces of wall by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper complete all as specified and directed.

S & F Key box of size (30cm x 30cm x 20cm) H1 metal (Finish Color - Prince Grey) and grouted to wall complete all as specified and directed.

S & F Wooden rifle rack with locking system with apacity of 12 rifiles in each rack top and bottom rail as per drawing No. CWE/K/99 complete all as specified and directed.

SCH A PART- III [ EXTENSION OF UNIT ARMOURY AND GUNNERY OFFICE (ADM BUILDING) AT CGAE GOA]- E/M ITEMS M & L Point wiring complete with 1100 volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through steel enamaled conduit pipe, fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches, sockets, etc concealed on wall complete all as specified and directed by Engr-in-Charge. :-

(a) One light/Fan point controlled by one way switch 5/6 Amp complete all as specified and directed

(b) One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 Sq. mm size complete all as specified and directed

(c) One 3 pin socket Point outlet, 5/6 Amp on Independent board complete all as specified and directed

(d) One 3 pin socket outlet. 15 amps, independent board with cables 4 sq. mm size complete all as specified and directed

S & F Flame proof weather proof LED tubelight fitting 1 x 20 W x 4' complete all as specified and directed

S & F Exhaust fans flame proof AC single phase 230/ 240 V of size 380mm sweep with louver complete all as specified and directed

S & F LED tube light fitting 1 x 18 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

S & F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S & F Modular Switch 1 way 6A, 1 module complete all as specified and directed

S & F Modular socket 6A -2/3 pin combined 2 module complete all as specified and directed

S & F Modular Switch 1 way 16A, 1 module complete all as specified and directed.

S & F Modular socket 1 way 16A, 1 module complete all as specified and directed.

S & F Modular fan step regulator, 2 module complete all as specified and directed

S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 230V complete all as specified and directed.

S & F Flameproof ceiling rose three terminal surface bakelite with square box AC 50 Hz 230 volts of size 65mm x 50 mm complete all as specified and directed.

M & L Ceiling rose 3 treminals/ PVC polycarbonate isolated body size (65mm x 50mm surface type, 230V complete all as specified and directed.

M & L Sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5 sqmm alongwith one run of FRLS PVC insulated & unsheathed copper conductor of nominal cross sectional area 2.5 sqmm as earth continuity conductor drawn through steel enamaled counduit pipe reqds size confiming to IS: 9537(Part-3), including accessories fixed on wall/ceiling all as directed including making good of disturbed surfaces area complete all as specified and directed.

S & F MCB DB SPN double door 8 way sheet metal enclosure SPN 240 V 50 Hz horizontal with IP-20 degree protection complete all as specified and directed.

S & F SP 06 to 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity of in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S & F SPN 32 AMP rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity of in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M & L Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete all as specified and directed.

M & L detectors complying with and type certified to EN - 45 Addressable type multisensor detector with heat and smoke combination as per IS: 11360 complete all as specified and directed.

Supply, installation, testing, commissioning of Addressable sounder complete all as specified and directed.

Supply, laying and fixed to wall / floor/ceiling PVC insulated screened PVC sheathed galvanised steel strip or wire armoured with stranded copper conductor of size 1.5 Sqmm, 3 core and 1.5 Sqmm earth wire 1100 Volts grade complete all as specified and directed.

S & F Mild steel black conduit medium grade including all fittings & Fixture, boxes (junction/terminal) etc fixed on wall, ceiling / roof / structure etc of the size 20mm dia complete all as specified and directed.

Shree Ram Enterprises (BID ID -3067191)

K M SUBHANAIAH (BID ID -3067595)

SLB Enterprises (BID ID -3064216)

M/S Kartik Enterprises (BID ID -3057014)

M/S jvsr constructions (BID ID -3053281)