Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.1 LAccepted-AOC MAIN ROAD BHEJAPUT DAMANJODI KORAPUT ODISHA 763008 | DAMANJODI | KORAPUT | ODISHA | 763008 | ₹30.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹30.4 LRejected-AOC SATSANG BHEJAPUT DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | ₹30.4 L | L2 | Rejected-AOC Not L1 bidder |
| 3 | L3₹32.4 LRejected-AOC BHEJAPUT ARABINDA BIHAR DAMANJODI KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | ₹32.4 L | L3 | Rejected-AOC Not L1 bidder |
| 4 | L4₹34.9 LRejected-AOC | ₹34.9 L | L4 | Rejected-AOC Not L1 bidder |
| 5 | L5₹45.0 LRejected-AOC AT BHEJAPUT PO DAMANJODI DIST KORAPUT ODISHA 763008 | KORAPUT | ODISHA | 763008 | ₹45.0 L | L5 | Rejected-AOC Not L1 bidder |
| Sl No | Description | Qty | Unit | M/S SADASHIV ENTERPRISES L7 | MS/ BABA BISWANATH CONSTRUCTION L1 | M/S RAHUL CONSTRUCTION L4 | PADMANAV NAYAK L3 | M/S M H ZAMAN L6 | NSPP INDIA PRIVATE LIMITED L5 | S K ENGINEERING WORKS L8 | DIPAK ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | 1.1.2) Removing the excavated materials , debris of any description and other waste materials, spoil including loading into trucks/tractors using baskets by head loads or any other means and transporting by trucks/ tractors up to a distance of 5.00 km and unloading at the ear marked places inside plant, spreading levelling complete as directed by Engineer-in-charge. | 200 | M3 | 91 ₹18,200 | 90 ₹18,000 | 153 ₹30,600 | 115 ₹23,000 | 120 ₹24,000 | 110 ₹22,000 | 150 ₹30,000 | 65 ₹13,000 |
| 2.00 | 4.1.5) PCC 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stoneaggregate 20 mm nominal size) (Cement will be issued as free of cost by Nalco at it's store point) | 10 | M3 | 2,611 ₹26,110 | 2,500 ₹25,000 | 4,265 ₹42,650 | 4,100 ₹41,000 | 3,360 ₹33,600 | 3,600 ₹36,000 | 4,800 ₹48,000 | 2,200 ₹22,000 |
| 3.00 | 4.1.3) Providing and laying in position Plain cement concrete 1:2:4 ( 1Cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) of specified grade excluding the cost of centring and shuttering - All work upto plinth level ( Cement will be supplied free of cost by NALCO at it's store point.) | 20 | M3 | 2,801 ₹56,020 | 2,800 ₹56,000 | 4,194 ₹83,880 | 4,200 ₹84,000 | 3,480 ₹69,600 | 3,650 ₹73,000 | 4,800 ₹96,000 | 2,300 ₹46,000 |
| 4.00 | 6.32.2) Providing & laying Brick masonry in superstructure in any shape including scaffolding, staging, curing, all complete in Cement mortar (1 Cement:6 sand) up to a hight of floor V ( 20 metres from ground level). ( Ash bricks will be procured by the Agency and Cement will be issued free of cost at by Nalco from store ) | 10 | M3 | 5,531 ₹55,310 | 4,900 ₹49,000 | 6,588 ₹65,880 | 5,700 ₹57,000 | 5,760 ₹57,600 | 4,200 ₹42,000 | 14,500 ₹1.4 L | 3,500 ₹35,000 |
| 5.00 | 5.12) Providing precast reinforced cement concrete work in lintels, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, drain covers etc. including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) | 5 | M3 | 3,651 ₹18,255 | 3,000 ₹15,000 | 6,760 ₹33,800 | 5,500 ₹27,500 | 4,800 ₹24,000 | 4,000 ₹20,000 | 5,600 ₹28,000 | 3,000 ₹15,000 |
| 6.00 | 11.56.1) Providing & Fixing of polished mechine moulded Granite stone flooring in required designed and patterns in linear as well as curvilinear portion of the building all complete as per the architechtural drawing with 18 mm thick stone slab over 20 mm ( avarage ) thick base of cement morter 1:4 ( 1cement : 4 coarrse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , cutting and polishing and all colour etc all complete as specified and as directed by the E-I-C.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE). | 100 | M2 | 4,871 ₹4.9 L | 2,365 ₹2.4 L | 2,990 ₹3.0 L | 3,600 ₹3.6 L | 4,200 ₹4.2 L | 2,850 ₹2.9 L | 2,500 ₹2.5 L | 2,400 ₹2.4 L |
| 7.00 | 22.14.1) Providing and laying grading concrete with (1 cement:2 corse sand:4 graded stone aggrgates of 20 mm and down size) on roof with required thickness as directed by Engineer in charge, finished with 6mm thick cement plaster 1:3: and neat cement punning,including cleaning the surface,curing up to 15 days,at all hight/any floor,etc complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE). | 5 | M3 | 3,351 ₹16,755 | 3,000 ₹15,000 | 4,300 ₹21,500 | 4,200 ₹21,000 | 4,560 ₹22,800 | 4,500 ₹22,500 | 5,800 ₹29,000 | 2,300 ₹11,500 |
| 8.00 | P&F factory made WPC chowkhats for door window, vetilators frame size 125x62.5mm made of WPC solid section having overall diemensions of approved quality and make with ISI mark and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge . | 150 | M | 841 ₹1.3 L | 650 ₹97,500 | 800 ₹1.2 L | 1,025 ₹1.5 L | 960 ₹1.4 L | 1,100 ₹1.6 L | 800 ₹1.2 L | 2,100 ₹3.1 L |
| 9.00 | P&F factory made WPC chowkhats for door window, vetilators frame size 75x50mm made of WPC solid section having overall diemensions of approved quality and make with ISI mark and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge . | 500 | M | 651 ₹3.3 L | 550 ₹2.8 L | 450 ₹2.3 L | 650 ₹3.3 L | 600 ₹3 L | 950 ₹4.8 L | 600 ₹3 L | 2,100 ₹10.5 L |
| 10.00 | P&F to existing door frames 28 mm thick factory made WPC flush door shutters made of a WPC of approved quality & make with ISI mark and 3 nos stainless steel hinges fixed to the frame complete as per direction of Engineer-in-Charge. | 200 | M2 | 751 ₹1.5 L | 2,000 ₹4 L | 3,600 ₹7.2 L | 3,600 ₹7.2 L | 3,360 ₹6.7 L | 1,850 ₹3.7 L | 2,200 ₹4.4 L | 2,200 ₹4.4 L |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
13 Jan 2026, 10:00 amClosed
DGM TnC
TnC Dept, Nalco Damanjodi
RENOVATION OF TOILET BLOCKS AND REST ROOMS IN ALUMINA PLANT, NALCO, DAMANJODI
2025_NALCO_891698_1
TnC/AR/03/eR-2954
Limited
Miscellaneous Works
540 days
Nalco Damanjodi
Not Applicable
6 documents required · 6 mandatory
₹0
₹40,000
Yes
17 Mar 2026
30 Dec 2025
14 Jan 2026
30 Dec 2025
13 Jan 2026
30 Dec 2025
1.1.2) Removing the excavated materials , debris of any description and other waste materials, spoil including loading into trucks/tractors using baskets by head loads or any other means and transporting by trucks/ tractors up to a distance of 5.00 km and unloading at the ear marked places inside plant, spreading levelling complete as directed by Engineer-in-charge.
4.1.5) PCC 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stoneaggregate 20 mm nominal size) (Cement will be issued as free of cost by Nalco at it's store point)
4.1.3) Providing and laying in position Plain cement concrete 1:2:4 ( 1Cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) of specified grade excluding the cost of centring and shuttering - All work upto plinth level ( Cement will be supplied free of cost by NALCO at it's store point.)
6.32.2) Providing & laying Brick masonry in superstructure in any shape including scaffolding, staging, curing, all complete in Cement mortar (1 Cement:6 sand) up to a hight of floor V ( 20 metres from ground level). ( Ash bricks will be procured by the Agency and Cement will be issued free of cost at by Nalco from store )
5.12) Providing precast reinforced cement concrete work in lintels, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, drain covers etc. including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)
11.56.1) Providing & Fixing of polished mechine moulded Granite stone flooring in required designed and patterns in linear as well as curvilinear portion of the building all complete as per the architechtural drawing with 18 mm thick stone slab over 20 mm ( avarage ) thick base of cement morter 1:4 ( 1cement : 4 coarrse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , cutting and polishing and all colour etc all complete as specified and as directed by the E-I-C.(CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
22.14.1) Providing and laying grading concrete with (1 cement:2 corse sand:4 graded stone aggrgates of 20 mm and down size) on roof with required thickness as directed by Engineer in charge, finished with 6mm thick cement plaster 1:3: and neat cement punning,including cleaning the surface,curing up to 15 days,at all hight/any floor,etc complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).
P&F factory made WPC chowkhats for door window, vetilators frame size 125x62.5mm made of WPC solid section having overall diemensions of approved quality and make with ISI mark and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge .
P&F factory made WPC chowkhats for door window, vetilators frame size 75x50mm made of WPC solid section having overall diemensions of approved quality and make with ISI mark and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge .
P&F to existing door frames 28 mm thick factory made WPC flush door shutters made of a WPC of approved quality & make with ISI mark and 3 nos stainless steel hinges fixed to the frame complete as per direction of Engineer-in-Charge.
9.83) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
9.96.2) Providing and fixing aluminium sliding door bolts 250x16mm, ISI marked anodised , transparent or dyed to required colour or shade, with nuts and screws etc. complete :
9.97.2) Providing and fixing aluminium tower bolts 250X1Omm, ISI marked, anodised ) transparent or dyed to required colour or shade, with necessary screws etc. complete
9.100.1) Providing and fixing aluminium handles 125mm ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete
15.12.1) Dismantling doors, windows of area 3 sq. metres and below.
11.41.2) Providing and laying vitrified floor tiles size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make ( Nitco,/Orient/Somany/Kajaria/ Johnson or equivalent ), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.( Cement will be supplied free of cost by NALCO at it's store point.)
8.31) Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 of approved make (Nitco,/Orient/Somany/Kajaria/ Johnson or equivalent ), in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shadecomplete. NOTE: Item no 8.31 is brought from Sub Head 11 i.e. Flooring,Item No 11.36 (Cement will be issued as FIM)
13.2.2) Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement:6 sand) on the rough sides of single or half brick wall or masonary work using approved type of sand including curiing etc., all complete for all height.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE ).
13.18) Neat cement punning ( Cement will be issued as FIM)
13.26) Providing and applying of plaster of paris 2mm thickness plastered surface to prepare the surface even and smooth complete.
13.47.1) Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade for new work ( Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/sqm
13.90.1) Distempering with oil bound washable distemper One or more coat in walls, etc. of approved brand and make on old / new work over and including priming coat with cement primer with approved shade to give an even shade complete as per manufacturers specification. Area must be cleaned off spilled paints etc. after completion of painting works.
13.61.1) Applying synthetic enamel paint Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
15.2.1) Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
15.9.2) Dismantling of all types of masonry ,stacking serviceable materials at site and removing rubbish and unserviceable materials and disposing within a lead of 50.00 mtr as directed by M.I.C.
15.23.2) Dismantling tile work thickness 25mm upto 40mm in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.
15.42.2) Dismantling of 100 mm dia pipes including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
17.23) Providing & fixing of white vitreous urinals basin of size 430x260x350mm size of approved make ( i.e. Perryware/Hindware or equivalent ) including cutting & making good the walls & floors wherever required all complete as per direction of Engineeer- in-charge.
17.7.3) Providing & fixing white vitreous china Flat back wash basin size 550x400 mm with sigle 15mm C.P.brass Pillar tap with C.I. brackets painted white, 32mm C.P. brass waste of standard pattern with waste pipe of required length, 32mm dia meter CP brass trap & unions complete,including cutting & making good the walls wherever required complete.
17.13.2) P& F of Indian type Water closet pan of size 580mmx440mm approved make ( i.e. Parryware/Hindware or equivalent for new work with all labour, tools & tackles etc complete as per the direction of M.I.C.
17.15.00) P&F white vitreous china pedestal type (European type) Water Closet pan of approved make (i.e. Parryware / Hindware or equivalent) for old / New work with all labour, tools & tackles etc. complete as per the direction of Engineer-In-Charge.
17.18.1) P&F of 10 Ltr. Capacity PVC low level cistern of approved make ( i.e. Perryware/Hindware or equivalent ) with maually control device ( handle lever) with all fixture and fittings complete including removal of damaged cistern wherever required for new work as per the direction of Manager- in charge.
17.20.1) Providing and fixing white solid plastic seat with lid for pedestal type W.C. pan complete :
17.60.1) Providing and fixing 0f 100 mm inlet and 100mm outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
17.29) Providing & fixing following size 100mmx100mm sand cast iron gratings for gully , Nahni trap or chambers including all materials and labours.
17.31.00) Providing & fixing of size 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos sheet ground fixed to wooden cleats with CP.brass screws and washers.
17.33.00) Providing and fixing 600 x 120 mm glass shelf edges rounded off supported on anodised aluminium angles frame with C.P brass brackets and guard rail complete fixed to wooden cleats with C.P. brass screws and washers.
12.41.1) Supplying & Fixing UPVC pipes 75 mm dia with UPVC fittings & clamps including cutting floors, & making halls in the walls etc. all complete as per direction of Engr-in- charge for external/internal works.
12.41.2) Supplying & Fixing UPVC pipes 110 mm dia with UPVC fittings & clamps including cutting floors, & making halls in the walls etc. all complete as per direction of Engr-in- charge for external/internal works.
12.42.1.2) Providing and fixing coupler 110mm- UPVC moulded fittings conforming to IS : 13592 Type A, including jointing with seal ring conforming toIS : 5382, leaving 10 mm gap for thermal expansion
12.42.3.2) Providing and fixing of single Tee with door 110x110x110mm- UPVC moulded fittings conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382
12.42.4.2) Providing and fixing of single Tee without door 110x110x110mm- UPVC moulded fittings conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5383
12.42.5.2) Providing and fixing of 110mm bend- UPVC moulded fittings conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5384
12.42.6.2) Providing and fixing of 110mm shoe- UPVC moulded fittings conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5385
18.8.1) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15mm, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
18.8.2) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20mm, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
18.9.3) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25 mm, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
18.9.4) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32 mm, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
18.51.1) Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality with ISI mark and as per relevant ISI specification or equivalent approved brand and weight not less than 690 gms.
18.17.1) Providing and fixing 25 mm nominal bore gun metal valve with C.I. Wheel of approved make ( screwed end ) approved quality with ISI mark and as per relevant ISI specification or equivalent approved brand.
18.55.3) P&F of PTMT Concealed stop cock ,15mm nominal bore ,165mm and weight not less than 110 gms
18.58.1.2) Providing and fixing PTMT grating 125 mm dia with 25 mm waste hole of approved quality and colour.
18.74.2) P&F of UPVC connection pipe 15mm with 45 cm length
21.1.1.2) P& F aluminium work For fixed portions Powder coated aluminium (minium thickness of powder coating 50 micron)
21.3.2) Providing and fixing glazing with float glass panes of 5mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .
19.4.1.1) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
19.21.1 ) Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250mm diameter. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)
Cleaning of manholes, sewerage pipe lines and septic tanks of all plant building at Alumina refinery, disposal of the manure/sludge at the specified locations within a distance of 5 K.M. from septic tank ,as directed by Engineer-in-charge. Cleaning and disposal of sludge must be done by mechanical means without polluting the surrounding area, transporting the manure by sealed / air tight container ( The inside volume of manholes,pipe line and septic tank will be considered for payment ).
Cleaning of manholes of any size / dimension in sewerage line, disposal of debrises/sludge/manure from the man holes if any at a suitable distance including all labour, tools,& tackles etc. complete as per the direction of Engineer-in-charge.
Cleaning of sewerage line of all diameter and disposal of the debrises/sludge/manure of the seweragw line if any at a suitable distance including supply of all labour, tools, & tackles etc. complete as per the direction of Engineer-in-charge.
Lettering Upto a height of 3.00 metres from ground level
Supply and installation of a 5 KLD bio-digester FRP septic tank with 5 kg anaerobic bacteria. Material of construction: FRP, wall thickness: 6 mm, 5 partitions, inlet: 100 mm dia, outlet: 75 mm dia. The tank shall be installed underground after required excavation of the pit. (Excavation payment will be made under the respective item). Installation shall be carried out as per the direction of the Engineer-in-Charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
Tendernotice_2.pdf
PDF • 0.15 MB
Tendernotice_3.pdf
PDF • 0.37 MB
Tendernotice_4.pdf
PDF • 0.69 MB
BOQ_937264.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid