Providing Aluminium partition to the General Physic lab ( Room No 116) at 1st floor and internal painting and other repair work of HOD chamber , Seminar hall of Dept. of Physics and paiinting to staircase and passage area of GF, FF, SF of Career D

Amount

Anodized Aluminium partitions: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications.-First floor

Anodized Aluminium Door: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials,labour,usage charges of machinery complete as per specifications- First Floor

Anodized Aluminium Door: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials,labour,usage charges of machinery complete as per specifications- Second Floor

5mm thick glass for Aluminium partition and Aluminium doors: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.- First floor

5mm thick glass for Aluminium partition and Aluminium doors: Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications.- Second floor

12 mm thick prelaminated particle board : Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in- charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. – First floor

Enamel painting on previously painted metal surface (one coat): Providing and applying painting in One coat on previously painted wood surface and/ or wood based /metal surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications.

Hydraulic door closer: Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI:3564 embossed on the body, door weight upto 35kg and suitable for door width with necessary accessories and screws etc. complete.

Wall bore: Wall bores in size stone masonry including cost of materials, labour, HOM complete as per specification. – in all the floor levels.

Shifting of Lab sink: Shifting of existing lab sink with stand to the south side room including disconnecting and realignment of existing water supply pipe line and waste water pipe line including cost of materials, labour, HOM, with all lead and lift etc., complete.

Plastic emulsion painting for ceiling & walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/JSW/ equivalent) on ceiling / Wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.- Ground floor

Plastic emulsion painting for ceiling & walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/JSW/ equivalent) on ceiling / Wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.- First floor

Plastic emulsion painting for ceiling & walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/JSW/ equivalent) on ceiling / Wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.- Second floor

Plastic emulsion painting for ceiling & walls without primer: Providing and applying painting in One coat with plastic emulsion paint of approved brand (Asian Emulsion/ Nerolac / Berger/ Sherwin Williams/JSW/ equivalent) on ceiling / Wall surface without primer to give an even shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of all material, labour etc complete as per specifications.- Third floor

Acrylic emulsion painting for walls without primer: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge..- Ground Floor

Acrylic emulsion painting for walls without primer: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- First Floor

Acrylic emulsion painting for walls without primer: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- Second Floor

Enamel painting on previously painted wooden / metal surface: Providing and applying painting in One coat on previously painted wood surface and/ or wood based surface / metal surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger/JSW or equivalent Make- Ground Floor

Enamel painting on previously painted wooden / metal surface: Providing and applying painting in One coat on previously painted wood surface and/ or wood based surface / metal surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger/JSW or equivalent Make- First Floor

Enamel painting on previously painted wooden / metal surface: Providing and applying painting in One coat on previously painted wood surface and/ or wood based surface / metal surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger/JSW or equivalent Make- Second Floor

Enamel painting on previously painted wooden / metal surface: Providing and applying painting in One coat on previously painted wood surface and/ or wood based surface / metal surface with enamel paint (to give an even shade, cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of material and labour complete as per specifications - Asian /Nerolac/ Berger/JSW or equivalent Make- Third Floor

Dismantling ventilators: Dismantling decayed or worn-out wooden/steel/RCC windows or ventilators with frame and shutters, removing and transporting the debris with all lead and lift; and stacking the dismantled materials available for re-use in the departmental store as directed including transportation charges etc. complete as per the direction of the Engineer In- Charge

Cement concrete Solid blocks – First Floor: Providing and constructing non load bearing wall with solid concrete blocks of size 400x100x200mm having a block density not less than 1800kg/cum having minimum average compressive strength of 4.00N/mm2 confirming to IS 2185 (Part 1): 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour charges, scaffolding, curing, hire charges of machineries et., complete as per specifications. KBS No5.4 – Second Floor

Plastering 15mm thick : Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Repairs of existing Aluminium window shutter: Providing repairs to aluminium window shutters by dismantling the shutters from the frame, cleaning the track, replacing glass beading with PVC white U beading, replacing the rusted screws and refixing the shutter to the frame after tightening the frame firmly to the wall, checking the smooth sliding movement of the shutter including cost of material, labour, transportation lead and lift, scaffolding wherever necessary etc., complete.

Dismantling aluminium/ Gypsum partitions: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposal area as directed, cost including all lead and lift charges etc., complete.- in all the floor levels

Plaster of paris (Gypsum anhydrous) for ceiling: Providing and fixing in position 12mm thick Plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling up to a height of 5.0mtr above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing, plastic emulsion painting etc., complete as per specifications.

PRATHEEK S D

sanjeeth