Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.5 LAccepted-AOC ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹34.9 L+₹2.5 L (7.66%)Rejected-Finance | L2 | Rejected-Finance NOT L1 | |
| 3 | Rejected-Technical 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | - | Rejected-Technical Due to slow progress in WLR QE Mar 25 and same DD uploaded in two different tenders |
| Sl No | Description | Qty | Unit | Auromirra Enterprises L2 | SREE CONSTRUCTIONS L1 |
|---|---|---|---|---|---|
| 1.00 | M&L for cleaning of underground /semiunderground fresh water sump with coconut/wire brushes brooms , clusters removal of silt , rubbish from the tank and cleaning tank with fresh water disinfecting with bleaching powder including cleaning of inlet and outlet points , removing of old date of cleaning including writing the words " Military Engineering Services, Tank Capacity and date of cleaning " in capital letters of suitable size of cleaning and disposing off the waste material at any waste dumping site for following capacity complete all as specified and directed by Engr in Charge.
(a) Under ground sump of capacity Sump of 30,000 gallons capacity at FMCC, | 1 | Each Job | 4,600 ₹4,600 | 4,500 ₹4,500 Lowest |
| 1.01 | (b)UG Sump of 15000 gallons capacity at SSB pump house, sub area P/H & Signal unit line | 3 | Each Job | 3,600 ₹10,800 | 3,500 ₹10,500 Lowest |
| 1.02 | (c) UG Sump of 5000 gallons capacity at Selection Centre South 2 Nos, Stn HQ 1No, Marshal Barrack 2Nos, RSI 2Nos IB 2Nos, and ZRO 1No | 10 | Each Job | 3,300 ₹33,000 | 3,200 ₹32,000 Lowest |
| 1.03 | (d) UG Sump of 20,000 gallons capacity at 56 coy ASC supply depot pump house. | 1 | Each Job | 3,300 ₹3,300 | 3,200 ₹3,200 Lowest |
| 1.04 | (e) UG Sump of 10000 gallons capacity at SSB pump house-03 no, signal OR line-01,ZRO-1No. | 5 | Each Job | 3,100 ₹15,500 | 3,000 ₹15,000 Lowest |
| 1.05 | (f) UG Sump of 48,000 gallons capacity at 56 coy ASC supply depot pump house. | 1 | Each Job | 4,900 ₹4,900 | 4,850 ₹4,850 Lowest |
| 2.00 | Material and labour for scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC over head resservoir (bottom & wall) by using brushes and bleaching powder and other cleaning materials as required and disposing off the waste material at any waste dumping site applying two coats of lime wash inside the wall surface of the tanks including writing the words " Military Engineer Services, Tank Capacity and date of claennig" in capital letters of suitable size on outside visible place of overhead tank with synthetic enamel white paint over black back ground of the over Head Tank Capacity 2 lakh gallons capacity at 30' staging at supply depot pump house. pump house complete all as specified and directed.
. | 1 | Each Job | 6,900 ₹6,900 Lowest | 7,000 ₹7,000 |
| 3.00 | Excavation in trenches for taking out/laying of pipe line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in soft/ loose soil complete and all as specified. | 350 | Cum | 295 ₹1,03,250 | 275 ₹96,250 Lowest |
| 4.00 | Returning filling including spreading leveling watering and well ramming in layers not exceeding 25 cm thick each layer of soft/loose soil complete and all as required. | 350 | Cum | 130 ₹45,500 | 125 ₹43,750 Lowest |
| 5.00 | Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete and all as specified. | 25 | Cum | 130 ₹3,250 | 125 ₹3,125 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
15 Nov 2025, 6:00 pmClosed
GE(S)BANGALORE
GE(S)BANGALORE
REPAIR/ MAINT OF EXTERNAL WATER SUPPLY NETWORK FOR ZONE A TO E AND PUMPS, MOTORS, STARTERS, SUMPS UNDER GE (S) BANGALORE.
2025_MES_736644_1
8965/E8
Open Tender
Civil Works
Item Rate
270 days
BANGALORE
AS PER NIT
6 documents required · 6 mandatory
₹500
GE(S)BANGALORE
₹90,000
Yes
27 Jan 2026
24 Oct 2025
17 Nov 2025
24 Oct 2025
15 Nov 2025
8 Nov 2025
Amount
M&L for cleaning of underground /semiunderground fresh water sump with coconut/wire brushes brooms , clusters removal of silt , rubbish from the tank and cleaning tank with fresh water disinfecting with bleaching powder including cleaning of inlet and outlet points , removing of old date of cleaning including writing the words " Military Engineering Services, Tank Capacity and date of cleaning " in capital letters of suitable size of cleaning and disposing off the waste material at any waste dumping site for following capacity complete all as specified and directed by Engr in Charge. (a) Under ground sump of capacity Sump of 30,000 gallons capacity at FMCC,
(b)UG Sump of 15000 gallons capacity at SSB pump house, sub area P/H & Signal unit line
(d) UG Sump of 20,000 gallons capacity at 56 coy ASC supply depot pump house.
(e) UG Sump of 10000 gallons capacity at SSB pump house-03 no, signal OR line-01,ZRO-1No.
(f) UG Sump of 48,000 gallons capacity at 56 coy ASC supply depot pump house.
Material and labour for scrubbing, cleaning thoroughly for removing the dirts, sediments, silts etc from the internal surfaces of RCC over head resservoir (bottom & wall) by using brushes and bleaching powder and other cleaning materials as required and disposing off the waste material at any waste dumping site applying two coats of lime wash inside the wall surface of the tanks including writing the words " Military Engineer Services, Tank Capacity and date of claennig" in capital letters of suitable size on outside visible place of overhead tank with synthetic enamel white paint over black back ground of the over Head Tank Capacity 2 lakh gallons capacity at 30' staging at supply depot pump house. pump house complete all as specified and directed. .
Excavation in trenches for taking out/laying of pipe line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in soft/ loose soil complete and all as specified.
Returning filling including spreading leveling watering and well ramming in layers not exceeding 25 cm thick each layer of soft/loose soil complete and all as required.
Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete and all as specified.
Taking up cast iron/Ductile Iron /GI/CPVC /PPR water mains including all fittings, with spigot and socket ends and lead joints including burning out joints of size of 200,150, 100 80, to 15mm dia complete all as specified and directed by Engr-In-Charge.
Laying only Pipes of any grade and type upto 50 mm bore with all new fitting in trenches (Obtained from Taking up/down) after cleaning as directed by Engr-in-Charge complete and all as specified.
Laying only Pipes of any grade and type above 50 mm bore and upto 200 mm bore with all new fitting in trenches (Obtained from Taking up/down) after cleaning complete all as specified and directed by Engr-in-Charge complete and all as specified.
Supply , Lay & Jointing with flexible rubber gaskets push on type joints Ductile Iron pipe class K 7 ISI marked as per IS 8329-2000 with centrifugally lined with cement mortar complete in trenches of size 200 mm dia Complete all as specified and as directed by Engr-In-Charge.
Supply, Lay & Jointing with flexible rubber gaskets push on type joints Ductile Iron pipe class K 7 ISI marked as per IS 8329-2000 with centrifugally lined with cement mortar complete in trenches of size 150 mm dia Complete all as specified and as directed by Engr-In-Charge.
Supply , Lay & Jointing with flexible rubber gaskets push on type joints Ductile Iron pipe class K 7 ISI marked as per IS 8329-2000 with centrifugally lined with cement mortar complete in trenches of size 100 mm dia Complete all as specified and as directed by Engr-In-Charge.
Supply and fixing 50 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches Complete all as specified and as directed by Engr-In-Charge.
Supply and fixing 40 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches Complete all as specified and as directed by Engr-In-Charge.
Supply and fixing 25 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches Complete all as specified and as directed by Engr-In-Charge.
Supply and fixing 20 mm bore Mild steel tube medium grade galvanised with all fitting laid in trenches Complete all as specified and as directed by Engr-In-Charge.
Supply and replace 15 mm bore Mild steel tube medium grade galvanized with all fitting laid in trenches walls and ceilings or laid in floors Complete all as specified and as directed by Engr-In-Charge.
Supply and laying CPVC SDR 11 Pipes & Plain CPVC SDR 11 fittings with all fittings, bends, nipple, elbow coupler etc laid in trenches/walls/ceilings/ floors of size 15/16 mm bore all as directed of following sizes Complete all as specified and as directed by Engr-In-Charge.
Supply and laying CPVC SDR 11 Pipes & Plain CPVC SDR 11 fittings with all fittings, bends, nipple, elbow coupler etc laid in trenches/walls/ceilings/ floors of size 20 mm bore all as directed of following sizes Complete all as specified and as directed by Engr-In-Charge.
Supply and laying CPVC SDR 11 Pipes & Plain CPVC SDR 11 fittings with all fittings, bends, nipple, elbow coupler etc laid in trenches/walls/ceilings/ floors of size 25 mm bore all as directed of following sizes Complete all as specified and as directed by Engr-In-Charge.
Supply and laying CPVC SDR 11 Pipes & Plain CPVC SDR 11 fittings with all fittings, bends, nipple, elbow coupler etc laid in trenches/walls/ceilings/ floors of size 40 mm bore all as directed of following sizes Complete all as specified and as directed by Engr-In-Charge.
M& L for Mechanical joints with rubber rings at both ends including fabrication work cutting grinding welding and finishing along with bolts nuts washers of 200 mm bore straight joint work including inserting collar of required size for completing joint for DI/CI/MS/Cement pipes of any grade including testing on completion complete all as specified and directed by Engr in Charge.
All as per item No- 21 above here in before but of size 150 mm dia complete all as specified and directed
All as per item No- 21 above here in before but of size 100 mm dia complete all as specified and directed
M&L for nut bolt washers various sizes full threaded/half threaded as pr reqmt at site complete all as specified and directed by Engr-In-Charge.
M& L for joints in CPVC pipes using suitable cement based solvent, coupler, transition bush, collar of required size, threading if required including grinding, cutting and finishing of size upto 50 mm bore straight joint work including testing on completion complete all as specified and directed by Engr in Charge.
Supply and fixing MS Pipe of dia 200 mm including cutting, jonting and welding for arresting Leakage in pipe lines complete all as specified and directed by Engr-in-Charge.
Supply and fixing MS Pipe of dia 150 mm including cutting, jonting and welding for arresting Leakage in pipe lines complete all as specified and directed by Engr-in-Charge.
Supply and fixing MS Pipe of dia 100 mm including cutting, jonting and welding for arresting Leakage in pipe lines complete all as specified and directed by Engr-in-Charge.
Supply and replace of 40 mm bore gate valve CPVC SDR 11 grade jointed at both ends for pipe complete and all as specified.
Supply and replace of 25 mm bore gate valve CPVC SDR 11 grade jointed at both ends for pipe complete and all as specified.
Supply and replace of 15 mm bore gate valve CPVC SDR 11 grade jointed at both ends for pipe complete and all as specified.
Supply and replace of 50 mm bore gate valve Gun metal screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified.
Supply and replace of 40 mm bore gate valve Gun metal alloy screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified.
Supply and replace of 25 mm bore gate Gun metal alloy screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified.
Supply and replace of 20 mm bore gate Gun metal alloy screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified.
Supply and replace of 15 mm bore gate Gun metal alloy screwed down high pressure with crutch with or butter fly handle screwed booth ends for pipe complete and all as specified.
Construction of valve pit of size 60 x 60 x 60 cm internal dimensions with 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded broken stone aggregate sub base of floor, 50 mm PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregae) in floor finished even and fair without using extra cement one brick work in CM 1:4 rending 15 mm thick plaster in CM 1:4 including 3 mm thick MS sheet pit frame 40x40x6 mm thick complete with locking arrangement having provision of lifting handle including 2 coats of synthetic enamel paint over one coat of red oxide primer to steel surface and excavation in soft/loose soil, returning filling and removal of surplus soil up to 500 mtr distance complete and all as specified.
All as per Srl item No 37 above but Valve pit of Size 90 x 90 x 90 cm complete and all as specified.
S&F in replacement Cast iron/ Ductile Iron pipe bends (any type radius and angle) taper any type (Straight) bend increasing Per decreasing or double socket etc Tee peces, single branch 'Y' junction double branch, coller, Kg capacity and plugs for 80 mm bore to 150 mm bore CI pipe conforming to IS-1538-1976 and any MS cross arm bracings nut bolts etc complete and all as specified and directed by Engr- In-Charge
Supply and fixing in Replacement of 100 mm bore sluice valve type PN-1 double Flanged cost iron type with brass spindle and iron wheel and 16 mm dia iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete and all as specified
All as per Srl item No 40 above but of Size 150 mm bore complete and all as specified.
All as per Srl item No 40 above but of Size 80 mm bore complete and all as specified.
Material and labour for run lead joint to 150 mm bore complete and all as specified and directed by Engr-in - Charge
Material and labour for run lead joint to 100 mm bore complete and all as specified and directed by Engr-in - Charge
Material and labour for run lead joint to 80 mm bore complete and all as specified and directed by Engr-in - Charge
Replacement of 80 mm bore Non return valve double Flanged cost iron type and 16 mm dia iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete and all as specified
Replacement of 100 mm bore Non return valve double Flanged cost iron type and 16 mm dia iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete and all as specified
Replacement of 150 mm bore Non return valve double Flanged cost iron type and 16 mm dia iron nuts, bolts & washers and rubber insertion sheet conforming to IS specification complete and all as specified
Supply and fixing in replacement of float valves plastic body heavy duty with rod and plastic ball of the following sizes complete all as specified and directed.
(a) 15 mm dia
(b) 20 mm dia
(c) 25 mm dia
Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.
Material & Labour for PCC 1:3:6 type C2 (using 20mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.
Material & Labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc., complete all as specified and directed.
S&F gland packing in sluice valve 10mm dia complete all as specifed and directed.
S&F gland packing in sluice valve 12mm dia complete all as specified and directed.
M&L for Preparation of surface & painting the Motors with Pump of any size any capacity complete after cleaning & applying one coat of stove enamelled Blue paint by spray painting as requirment at site matching with existing, writing MES No/ SM No complete all as specified & as directed by Engr -in-Charge.
M&L for Breaking road, pavement, hard standing, tiles of any type, including excavation of subbase, soil upto the depth of 0.60 mtr and width 0.45 mtr by mechanical means for fault finding in water pipe lines and including making good to the disturbed surfaces matching with existing after rectification of fault including removal of surplus material to nearby dumping point complete all as specified and directed by Engr-In-Charge. Note:(i) Any T&P required for work is deemed to be included in quoted rates. (ii) Tiles, cement concrete etc. required for making good is deemed to be included in quoted rates.
Dismantling the unserviceable foot valve, S & F New PVC foot valve 40 mm dia heavy duty complete all as directed including taking down unserviceable foot valve Complete all as specified and as directed by Engr-In-Charge.
Dismantling the unserviceable foot valve, S & F New PVC foot valve 50 mm dia swing type heavy duty complete all as directed including taking down unserviceable foot valve Complete all as specified and as directed by Engr-In-Charge.
Dismantling the unserviceable foot valve, S & F New PVC foot valve 80 mm dia swing type heavy duty complete all as directed including taking down unserviceable foot valve Complete all as specified and as directed by Engr-In-Charge.
Supply and fixing in replacement cast iron foot valve 100 mm dia flanged ends swing type operation, as per IS-4038 with necessary bolt and nuts etc complete all as directed including taking down unserviceable foot valve Complete all as specified and as directed by Engr-In-Charge.
All as per item No 63 above here in before but of size 150 mm dia
M&L for strip opening of Pump set of capacity 60 to 75 HP of any stage/size/ make, de-coupling from motor and removing from mounting frame, taking out shaft, impellers, bushings, rings etc and re assembling after replacement of defective items including replacement of gaskets, gland packing including testing on competion of job complete all as specified and directed by Engr-In-Charge. (Note: (a) Major defective items replaced will be measured and paid seperately under respective item of schedule, cost of minor items not mentioned in schedule and trasportion if reqd for job are deemed to be included in quoted rates. (b) During testing if pump set is not able to deliver at rated capacity, contractor has to re open and re assemble pump after making pump able to deliver at rated capacity without any financial effect.
All as per item No 65 above but for Pump set of capacity 30 HP to 40 HP
All as per item No 65 above but for Pump set of capacity 15 HP to 25 HP
All as per item No 65 above but for Pump set of capacity 7.5 HP to 12.5 HP
All as per item No 65 above but for Pump set of capacity upto 5 HP
Supply only following items to be fixed under items above for repair of pumps complete all as specified and directed by Engr-In-Charge.
Pump shaft stainless steel matching with existing suitable for 60 to 75 HP pump complete .
All as per Item No - 71 but suitable for 30 to 40 HP pump complete .
All as per Item No - 71 but suitable for 15 to 25 HP pump complete .
All as per Item No - 71 but suitable for 7.5 to 15 HP pump complete.
All as per Item No - 71 but suitable for upto 5 HP pump complete .
Impeller bronze/gunmetal matching with existing suitable for 60 to 75 HP pump complete .
All as per Item No - 76 but for 30 to 40 HP pump complete .
All as per Item No - 76 but for 15 to 25 HP pump complete .
All as per Item No - 76 but for 7.5 to 15 HP pump complete .
All as per Item No - 76 but for upto 5 HP pump complete .
CI Neck ring of size and specifications matching with existing for any size of pump complete .
Gun metal intermediate bush of size and specifications matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.
Suction/Discharge bush of size and specificaton matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.
Middle distance bush of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.
CI bowl for pump of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.
CI Sleeves for pump of size and specification matching with existing for any size of pump complete all as specified and directed by Engr-In-Charge.
Supply and fix Bearing of any type suitable for Motor/Pump of capacity 60Hp to 75 HP including dismantling of existing unserviceable bearing complete all as specified and directed by engr in Charge.
All as per Item No-87 but capacity 30 to 40 HP pump complete .
All as per Item No-87 but capacity 15 to 25 HP pump complete .
All as per Item No-87 but capacity 7.5 to 15 HP pump complete .
All as per Item No-87 but capacity 5HP pump complete .
M&L for Strip opening 3 phase any electric motor taking out burnt winding coils complete and rewinding with insulated water proof winding wire matching with existing size including seal PVC (water proof compound) reassembling the motor and testing at workshop complete all as specified and directed. (Note: Insulation to wires, windings, varnishing,and other items required for rewinding and making motor water proof not mentioned in description and T&P required for this job is deemed to be included in quoted rates.)
Taking out submersible pump set up to 15 HP from the bore well in any depth complete with column pipe and other connected part and lowering the same after repair of the pump set including checking of pump set for faults before shifting to workshop complete all as specified and directed. (Note: Required T&P for above work and transportation to workshop and taking back is deemed to be included in quoted rates)
Supply and lowering PVC insulated flat submersible copper cable 16 Sqmm, 1100 volts,3 Core all as specified and directed .
Supply and fixing in replacement thrust plate matching with existing size suitable for 60 HP to 75 HP Pump complete all as specified and directed by Engineer-in-Charge.
All as per Item No 95 but for 30 HP to 50 HP Pump Complete.
All as per Item No 95 but for 15 HP to 25 HP Pump complete .
All as per Item No 95 but for 7.5 HP to 12.5 HP Pump complete .
All as per Item No 95 but for upto 5 HP Pump complete .
S&F in replacement Stud with nuts including spring washer matching with existing complete all as specified and directed.
Supply and fixing in replacement single phase prevention relay suitable for star delta starters, of capacity upto 40 HP, with auto, mannual and bypass operation, with time delay setting including wiring and connection with existing star delta starter complete all as specified and directed by Engr-In-Charge.
Supply and fixing in replacement electronic timer suitable for star delta starters, having coil voltage 380 to 415 volts, with time delay 3 to 30 seconds, complete including wiring and connections with existing star delta starter complete all as specified and directed by Engr-In-Charge
Supply in replacement Love joy coupling complete with star bushes for the following capacity of the motors including dismantling the existing unserviceable coupling all as directed for Centrifugal pump set driven by 40 tp 75 HP Capacity 3 Phase , 415 Volts , 50 Hz AC supply complete all as specified and as directed.
All as per Item No-103 here in above but 40 to 60 HP.
All as per Item No-103 here in above but 15 to 30 HP
Taking out old unserviceable star delta starter , supply and fix new Star delta fully automatic in sheet metal enclosure with SPP feautures suitable for operation of pumping set connected with induction motor of 40 HP capacity 3 phase 415 volt 50 Hz AC supply complete all asdirected by Engr in Charge. Make- Matching with as per existing site
Taking out old unserviceable star delta starter , supply and fix new Star delta fully automatic in sheet metal enclosure type MN with SPP feautures suitable for operation of pumping set connected with induction motor of 25 HP capacity 3 phase 415 volt 50 Hz AC supply complete all as per . Make- Matching with as per existing site
Taking out old unserviceable star delta starter , supply and fix new Star delta fully automatic in sheet metal enclosure type MN with SPP feautures suitable for operation of pumping set connected with induction motor of 15 HP capacity 3 phase 415 volt 50 Hz AC supply complete all as per directed by Engr in Charge. Make- Matching with as per existing site
Taking out old unserviceable starter , supply and fix new Star delta fully automatic in sheet metal enclosure with SPP feautures suitable for operation of pumping set connected with induction motor of 7.5 HP capacity 3 phase 415 volt 50 Hz AC supply complete all as per directed by engr in charge .Make- Matching with as per existing site
Taking out old unserviceable DOLstarter , supply and fix new DOL starter in sheet metal enclosure with SPP feautures suitable for operation of pumping set connected with induction motor of upto 3 HP capacity 1 phase 215 volt 50 Hz AC supply complete all as per directed by Engr in Charge.Make- Matching with as per existing site
Supply and fixing in replacement contactors Three pole power contactor, 415 Volts 95 Amps capacity , 50Hz matching with existing starter with 2 NO/2 NC contacts as required complete all as per directed by Engr in Charge Make- L&T, Schnieder, Havells or as approved
Supply and fixing in replacement contactors Three pole power contactor, 415 Volts 45 Amps capacity , 50Hz matching with existing starter with 2 NO/2 NC contacts as required complete all as per directed by Engr in Charge Make- L&T, Schnieder, Havells or as approved
Supply and fixing in replacement contactors Three pole power contactor, 415 Volts 32 Amps capacity , 50Hz matching with existing starter with required no of NO/NC contacts complete all as per directed by Engr in Charge Make- L&T, Schnieder, Havells or as approved
Supply and fixing in replacement contactors Three pole power contactor, 415 Volts 25 Amps capacity , 50Hz matching with existing starter with required no of NO/NC contacts complete all as per directed by Engr in Charge Make- L&T, Schnieder, Havells or as approved
Taking out unserviceable relay supply and fix new thermal overload relay type with built in single phase protection CT operated , separate mounting 28-42 Amps all as per directed by Engr in Charge. Make- L&T, Schnieder, Havells or as approved
Taking out unserviceable relay supply and fix new Bimetal overload relay type with built in single phase protection CT operated , separate mounting 9-14 Amps all as per directed by Engr in Charge. Make- L&T, Schnieder, Havells or as approved
S&F on load changeover switch four pole 200 Amps 415 volts manual changeover front handle operated open execution type with handle including taking down old one change over switch connction complete all as specified and directed by Engr in Charge Make- Matching with as per existing site
S&F on load changeover switch four pole 100 Amps 415 volts 415 volts AC manual changeover front handle operated open execution type with handle including taking down old one change over switch connction complete all as specified and directed by Engr in Charge Make- Matching with as per existing site
M&L for lying , connecting & testing three core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade16 Sqmm in ducts /on ground /through existing pipes etc including taking out unserviceable flexible cable all as specified and as directed.
M&L for lying , connecting & testing three core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade10 Sqmm in ducts /on ground /through existing pipes etc including taking out unserviceable flexible cable all as specified and as directed.
M&L for lying , connecting & testing three core copper conductor flexible PVC insulated heavy duty unsheathed cable 1100 volts grade 06 Sqmm in ducts /on ground /through existing pipes etc including taking out unserviceable flexible cable all as specified and as directed.
M&L for in replacement of iron work of any type incl cross arms ,supports , bracing MS clamps etc made out of MS channel/angle iron/ flat iron/ round section of any size and bolts, nuts and washers incl painting with two coats of aluminium paint over a coat of red oxide complete all specified and as directed.
Supply and fix domestic purpose booster pump for water supply presure of watyer of capcity 1 HP single phase 230volt 50Hz 4 to 5 connection output complete all as specified and directed ny Engr in Charge.
Supply and fix monoblock motor pump set for capcity 1 HP single phase 230volt 50Hz complete all as specified and directed ny Engr in Charge.
Supply and fix monoblock motor pump set for capcity 2 HP single phase 230volt 50Hz complete all as specified and directed ny Engr in Charge.
M&L for repairing of LT Panel by fixing broken hinges welding , greasing , internal MCCB/Bus bar cubicle repairing , tightining of earthing including new hinges , locks welding /brazing , greasing if reqd for complete LT Panel off sizes complete all as dpeciefied and directed by Engr in Charge.
M&L for Preparaton of oldsurfaces for painting of existing LT Panel/feeder pillar size up to 1.7x1.2x0.4mtr by peeling existing paint layer and dust , cleaning of surface , and applying to coats of sytnhetic enamel paint of colour as decided over one coat of red oxide primer on all outdoor sides of LT panel including stand and inner side of gates complete all as specified and directed by Engr in Charge.
M&L for Preparaton of oldsurfaces for painting of existing CI/ GI pipe of size up to 200mm by peeling existing paint layer and dust , cleaning of surface , and applying to coats of sytnhetic enamel paint of colour as decided over one coat of red oxide primer on all outdoor sides of pipe complete all as specified and directed by Engr in Charge.
S&F in replacement of MCCB 3/4 pole 415 volt fixed type of capacity 315Amps with breaking capacity 36 KA Make- Matching with existing complete all as specified and directed by Engr-In-Charge
S&F in replacement of MCCB 3/4 pole 415 volt fixed type of capacity 250 Amps with breaking capacity 25 KA Make- Matching with existing complete all as specified and directed by Engr-In-Charge
S&F in replacement of MCCB 3/4 pole 415 volt fixed type of capacity 200 Amps with breaking capacity 25 KA Make- Matching with existing complete all as specified and directed by Engr-In-Charge
Collecting the water samples for water supply recived from BWSSB at pump houses and testing of the sample for Govt authorised/ NABL approved laboratory as per IS 105, physical and Bacteriological parameters including following pump house complete all as specified and as directed by Engr-in-Charge. (a) Turbidity (b) Total hardness (As CaCO3 in mg/l) (c) Sulphate (As SO2 in mg/l) (d) Iron (As Fe in mg/l) (e) Magnesium (As Mg in mg/l) (f) E Coli or thermo tolernat coliform Bacteria (g) Residual Clorine NOTE (FOR ITEM NO 4 & 5):- (a) The sample should be collected in sterilized bottles. (b) The samples should be tested in govt approved test laboratory (c) The details of the supply points and pumpin installations are as follows:- 1) 56 Coy Asc 2) Followers Qtrs 3) Hosp Raod 4) FMCC P/H 5) HQ K & K Sub Area 6) DAD / DCA 7) HR BK P/H 8) EDP P/H 9) RMS P/H 10) Kutline MAP Ph-II 11) Marshal Barrack 12) SUOE 13) ZRO 14) MES IB 15) MES IB
Auromirra Enterprises (BID ID -3480326)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tenderdocument8965.pdf
Tender Documents • 1.07 MB
BOQ_824816.xls
BOQ • 0.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .