Providing Module Lab in Soil Science and Water Management Building at College of Horticulture and Forestry, Neri, Hamirpur

Amount

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 300x16 mm (three hundred into sixteen milimetre)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 200x10 mm(two hundred into ten milimetre).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a)125mm(One hundred twenty five milimetre)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) (Jindal/ Hindalco make).

a). Anodised Aluminium ( anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of grade AC 15 for fixed portion.

b). .Anodised Aluminium ( anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of grade AC 15 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge(Actiontesa/Greenlam/CenturyMake) . a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing 15 mm nominal dia. Internal G.I. pipes (medium grade) complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. complete in all respect as per satisfaction of Engineer-in-Charge. (Jindal/ Surya make)

Providing and fixing 45 cm length and 15 mm nominal dia uplasticised PVC connection pipe with brass unions complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 complete in all respect as per satisfaction of Engineer-in-Charge (Seiko/ smile/ sparton/ zar make). Module lab

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/ Prayag make) a). 75mm (Seventy five millimetre) dia dia

Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make) a). 75mm (Seventy five millimetre) dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/ Prayag make) a). 75mm (Seventy five millimetre) dia..

Supplying and installation of Research module Laboratory Units (Waldner / Kotterman / Godrej make) with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat complete in all respect as per satisfaction of Engineer-in-charge as well as concerned deptt. The following size of storage unit and other articles of module labs. are as under a). Storage Unit with cam lock Ht. 900 mm with metal Shutter MT-1200W-750D-9H – 8 Nos. AT-1050W-750D-9H – 1 No. Under Bench Cabinet 600W-450D-674H-2S – 8 Nos. Under Bench Cabinet 450W-450D-674H-1S-1D – 2 Nos. LS-600W-P – 9 Nos. REAR SIDE PANEL 750D-9H – 2 Nos. CORNER TABLE PIPE FRAME 750D-9H – 1 No. TABLE MOUNTED TRUNKING – 3 Nos. SINK UNIT – 2 Nos. PP DROP SINK 560x355 MM – 2 Nos. 3 WAY WATER FAUCET MODEL 100-32 – 2 Nos. 16A 1 WAY SWITCH MODEL NO M 130 – 6 Nos. 6/ 16A 6 PIN SHUTTER SOCKET MODEL NO M 1332 – 6 Nos.

Anil Jaswal (BID ID -498878)