Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹42.9 L+₹7.1 L (19.7%)Rejected-Finance 47 HUSENI LAKDA BAZAAR 242 BELLAIS ROAD MUMBAI 08 | MUMBAI | MUMBAI | MAHARASHTRA | 400008 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹44.9 L+₹9.1 L (25.3%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Being other than lowest |
Tender Value
Refer Docs
EMD Value
₹77,740
Closing Date
13 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NAVY NAGAR COLABA MUMBAI
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
AUGMENTATION OF EXTERNAL SERVICES NEAR BUILDING NO R 5 AT NEW NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI
2024_MES_642570_1
8342/E8
Open Tender
Civil Works
Item Rate
180 days
GE NW NAVY NAGAR COLABA MUMBAI
Class D and Category a (ii) and b(i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹77,740
Yes
31 Mar 2024
15 Feb 2024
14 Mar 2024
15 Feb 2024
13 Mar 2024
29 Feb 2024
15 Feb 2024 - 6 Mar 2024
Amount
Supply and lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable ,1100 volts grade, XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of 95 Sqmm 3.5 core , confirming to IS specifications complete all as specified and directed.
Same as Item No 1.00 above but size 50 Sq mm, 3.5 core
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth in hard/dense soil for laying of cable/ GI pipe and getting out complete all as specified and directed.
Returning, filling in including spreading levelling watering well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing surplus soil to a distance outside MoD land and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Cutting existing road surface or hard standing, bituminous topping 15 cm but n exc 30cm girth for laying of pipes/ cables and making good distrubed surface to match with existing complete.
M & L for cement concrete 1:4:8 type D2 (using 40mm grade stone aggregate) as in foundations, filling and mass concrete finished fair and even comlpete all as specified
M&L for GI pipe ,light grade 80mm dia for road crossing of cable for cable protection or above ground surface including taking out old one all as specified and directed.
M&L for GI pipe, light grade 100mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)11000 Volts grade with stranded aluminium conductor of size 185 Sqmm 3 Core and all as directed by Engineer-in-Charge.
M&L for double walled corrugated pipe with minimum radius 1900mm of 75mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. (Make:- Astral pipes/ Dutron/ Shree Darshan pipe)
M&L for double walled corrugated pipe with minimum radius 3300mm of 100/110mm dia for road crossing of cable or for cable protection of cable above ground surface all as specified and directed. (Make:- Astral pipes/ Dutron/ Shree Darshan pipe)
Supply, install, testing and commissioning of indoor type totally enclosed Vacuum Circuit Breaker suitable for 11KV, 400A, 250 MVA,18.4 KA(for 1 sec operation, equipped with CT, PT and protection relays horizontal isolation and horizontal drawn out cassette type and internal arc tested for 25KA for 0.1sec having IP 4X degree of manual/motarised spring charging mechanism. The auxilary voltage supply metering device/relay shall be 24V DC for breaker spring charging mechanism voltage will be 230V, AC. Make :- M/s Siemens/ C & G/ ABB Ltd Bangalore / Alsthom / BHEL / L & T / Schneider The VCB shall be comprising with following equipments:- (a) Vacuum circuit breaker suitable for 11 KV, 400A, 18.4KA operation. (b) Cast resin type dual core copper wound Current Transformer having 15 VA burden class 1.0 accuracy for metering core 5P10 for protection purpose (3 no with each VCB), having CT ratio 200/100/5A. (c) Drawn out 3 phase cast Resin copper wound Potential Transformer of ratio 11KV/110V having class 1.0 Accuracy, 100VA per phase capacity shall be mounted below the incomming breaker chamber. (d) Microprocessor based numeric relay with combined 3 O/C+ 1E/F having IDMT and instantaneous setting with communication and current measuring facility.
M&L for earthing complete with Copper earth plate electrode 600x600x3.15 mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using Copper earth strip 20 x 3 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 25 mm dia GI 'light grade' pipe from upper end of earth plate for protection to the extend of 7.5 mtr as earthing lead by means of copper nut , bolts as per connecting ,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate no 03 of SSR Part I complete all as specified and directed and testing on completion.
Supply and fix cable jointing kit for 11 KV grade cable for in door termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 185 sqmm complete as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in soft/ loose soil all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing of debris out side MD land all as specified.
M&L cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI pipes, foundation and hardstanding finishing even and fair without using extra cement including necessary formwork complete all as specified.
M & L for CI specials confirming to IS - 1538, spigot /socket or flanged fitting I.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 100/150 mm bore pipes (joints and joining material shall be measured and paid seperately)
M & L for DI specials confirming to IS - 9523, spigot /socket or flanged fitting I.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 150/200 mm bore pipes (joints and joining material shall be measured and paid seperately)
M & L for run lead joint with pig lead for150 mm bore pipe complete all as specified and directed
M & L for run lead joint with pig lead for100 mm bore pipe complete all as specified and directed
M & L for Cutting existing DI pipes and reducing for insertion of DI fittings to required length in position for 200 bore complete all as specified
M & L for Cutting existing DI pipes and reducing for insertion of DI fittings to required length in position for 150 bore complete all as specified
M & L for Cutting existing cast iron pipes and reducing for insertion of CI fittings to required length in position for 150 bore complete all as specified
M & L for Cutting existing cast iron pipes and reducing for insertion of CI fittings to required length in position for 100 bore complete all as specified
S&F sluice valves flanged end, cast iron body, flanged and drilled and non rising type brass spindle with nut, long body, class P N 1.6, confirming to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts, washers welding works complete including pumping out accumulated water all as specified and directed of following size.
150 mm bore
100 mm bore
M & L Construction of brick masonery valve chamber of size 1.2 x 1.2 x 1.2 M (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 5 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified.
Supply and fix DI pipes with spigot and socket centrifugally cast class `K9' in any length laid in trenches including nut, bolts, washers, rubber gasket, flanges, welding works etc of following sizes.
150mm bore
100mm bore
Supply/ Fixing of steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed by Engineer-in-charge.Note (1)Work to be carried out in high rise buildings plain wall or in shafts or in terraces or inside the flats for cutting the existing GI pipe line and replace the sme with new GI pipe in short piece of full length.
80 mm dia
50 mm bore
40 mm bore
Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe including fittings i.e. union, socket etc complete all as specified of following sizes :-
80 mm bore
50 mm bore
40 mm bore
Demolition of cement concrete of any description and in any position incl removal of debris from MD land complete all as specified and as directed by Engineer-in-Charge.
Demolition and breaking up 150mm inner dia of drain pipes (salt ware, AC or RCC pipe) with concrete of any description and in any position complete all as specified and directed
All as per item No 33 above but 200mm inner dia
M&L fo Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested for 150mm dia pipe with cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate ) all as specified.
All as per item No 35 above but 200mm inner dia
M & L Reinforced concrete pipes, class NP2, 150mm dia laid and jointed complate with collars all as specified.
All as per item No 37 above but 200mm dia
M&L PCC Type C2 1:3:6 (40mm graded agg) as in foundation, iron post base completen all as specified and as directed.
Demolition of brick work built in cement mortar including all quoins,arches pillars etc and removing of debrish outside the MoD land complete all as specified and directed
Brick work built in cement mortar 1:4 using old side sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed
M&L PCC Type B1 1:2:4 (20mm graded agg) as in benching to manholes including weathering , slightly rounded or chamfered angles all as specified.
M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as coping, road side interlocking, stops including necessary formwork complete all as specified and directed.
Cutting into existing manholes for connecting new drains of dia 150 / 200mm making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) in walls, retaining walls, basement walls, ballast walls manhole and the like including attached plaster and buttresses.
M&L for formwork to face of wall, retaining walls, abutments, parapets and staircase raillings, col, beam, lintel and similar works complete all as specified and directed
S&F MS TMT bars 10 mm dia and over cut to length, bend to shape required including cranking and bending, spirally hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia all as specified.
M & L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.
Fixing only chain link fencing including line wires, any mesh size and type of standards rails scraining babs etc incl permission of binding wire.(Note : Supply of chain link will be measured seperately).
Supply only chain link MS galvanized fencing of any mesh size and type. Note. Fixing shall be measured under serial item no here in above.
S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed by EIC (each line wire to be measured).
S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.
S&F Framed work such as grills, gratings, purline, rafter, fencing post, post of cover shed etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming
S & F 6 mm thick MS plate (CHEQUERRED)as in manhole cover fixed to angle iron frame with three Nos of hingeg and 150mm handle. complete all as specified.
M&L fo two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.
Material & labour for hardcore of broken stone or boulders of gauge n.exc.63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface,complete all as specified and directed.
Material & labour for 100mm thick PCC (1:3:6) type C1 (Using 20 mm graded stone aggregate) as in sub base to floors complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius in half brick thick wall built in cm 1:6 complete all as directed by EIC.
Taking down cement plaster on brick or stone walls, any description including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge.
M&L for Building up the profile of structrual members by using latex additives (MONOBOND) modified air cured mortar system (Polymer modified mortar) (1-5-15) = 1 monobond 5 cement 15 sand ) in damaged areas in 30 mm thickness including leveling profiling etc complete) complete all as specified and directed by Engr-In- Charge.
M&L for cement plaster 15 mm thick using factory manufactured pre mix/ready mix having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand on internal surface of wall conforming to IS 383 suitable complete all as specified and as directed.
M&L for plastering 10 mm thick in ceiling in CM 1:3 and finishing the surface even and smooth without using extra cement and finally providing complete all as specified and as directed by Engr-In- Charge.
M&L for two coat of plastic emulsion paint on new plaster surface of internal wall over a coat of primer over 1.5mm thick (Minimum) wall care putty incl preparation complete all as specified and directed.
All as per item No 63 above but in ceiling.
Dismantling floor, hearth or wall tiling/stone including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed by Engr-In- Charge.
M&L Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.09 Sqm but n.exc 0.18 Sqm in floors over and including 20 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. (Make : Kajaria/Somany/Johnson).
M&L for coloured glazed ceramic tiles in vertical surface 300x450x7 to 8mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In- Charge. Make : Kajaria/ Somany/ Johnson
M&L for coloured joint free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-In- Charge. Make : Kajaria/ Somany/ Johnson or equivalent.
M&L for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, door/window-cills, cooking platforms over including bedding layer of 20mm thick screed bed in cement mortar 1:6 for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engr-in-Charge.
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-In- Charge.
Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, chimny and similar suspended work including cutting of reinforcement cut as required to facilitate demolition including removing of debris out side MoD land complete all as specified and directed by Engr-In- Charge (Reinforcement cut as reqd to facilitate to demotion)
M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L for type B1 1:2:4 (using 20mm graded stone agg) as in slabs, shelves beam, lintel etc and like complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B2 (using 40mm graded stone agg) as in sub base of floor and pavement etc complete all as specified and directed.
Taking down chawkhats or frame (w/o taking off shutters from the frames) but n.exc 1.50 each complete all as specified and directed by Engr-In- Charge.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 90 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engr-In- Charge. Make : M/s Rajshree Plastiwood, M/s Kumar Arch Tech pvt LTd, M/s Navaratna Speciality Chemicals
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Make : M/s Rajshree Plastiwood, M/s Kumar Arch Tech pvt LTd, M/s Navaratna Speciality Chemicals
S&F mild steel hold fasts, wall ties and similar small articles conforming to Fe 290 Gde E-165
M&L Providing PCC 1:3:6, type B1(20mm graded stone aggregate) for hold fasts complete all as specified.
S&F 150 mm extruded aluminium handles, fabricated type anodised
S&F 150mm aluminium anodised barrel tower bolts of extruded section
S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy.
S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
S&F 100mm size stainless steel medium weight butt hinges all as specified and directed.
S&F in ovel type counter sunk vitreous china wash basin bowl type white (minimum 18" dia ) procelian stopper but including brackets complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair vitreous china bowl urinal flatback, long stall white with necessary fittings complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair vitreous china wash down water closet (EWC) (Pedestal) P or S trap including PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper. Complete all as specified and as directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair CP brass swan neck type pillar tap of 15mm dia, screwed down high pressure fancy type 250mm long complete all as specified and directed by Engr-In- Charge (Make:- Hindware/ Jaquar/ Cera)
S&F for 32 mm dia CP waste coupling of PTMT (Half or full threaded) complete all as specified and directed.
S&F for 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F in repair cromium plated toilet paper holder fancy type complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F for chromium plated brass telephonic health faucet shower with flexible tube of stainless steel, 1.00 Mtr long with CP holder, multi flow 15mm dia for iron pipe or for brass ferrule etc. complete all as specified and as directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair 450mm long stainless steel hat hook hanger of 6 peg complete all as specified and directed
S&F in repair uPVC ventilator openable type with necessary fittings including 5mm thick frosted glass complete all as specified and directed. Make : M/s Poly windows, M/s Aparna profiles, M/s Rajshri Plastiwood, M/s Madhu Industries
S&F towel ring CP of 150mm dia of ring complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair Towel rail of 750mm long fancy type complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F in repair glass shelf with all fittings complete all as specified and directed. (Make:- Hindware/ Jaquar/ Cera)
S&F SS Liquid soap container with connected fittings complete all as specified and directed by EIC. (Make:- Hindware/ Jaquar/ Cera)
S&F for PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 25 x 1.5 mm FI incl all fittings like sockets, bend, junction, elbow etc. (Make : Supreme/Prince/Kissan) complete all as specified and directed by Engr-In- Charge.
S&F for 110mm PVC (SWR) bends complete all as specified and as directed by Engr-In- Charge. Make: Supreme / Prince/ Kissan
S&F for 75 mm dia PVC (SWR) floor trap, with CP grating doom including jointing with solvent cement all as specified and directed
S&F in repair 25mm bore (outer dia) CPVC pipes of SDR 11 and plain CPVC SDR 11 fittings fixed concealed on wall or floor, ceiling or laying in floors complete all as specified and directed. Make : Finolex / Dutron / SFMC
S&F in repair 20mm bore (outer dia) CPVC pipes of SDR 11 and plain CPVC SDR 11 fittings fixed concealed on wall or floor, ceiling or laying in floors complete all as specified and directed.Make : Finolex / Dutron / SFMC
S&F in repair CP stop valves concealed type of 15mm bore, with adjustable wall flange (Make:- Hindware/ Jaquar/ Cera)
All as per item No 106 above but angular type complete all as specified and directed.(Make:- Hindware/ Jaquar/ Cera)
S & F two-in-One CP Bib cock with wall flange 15mm bore with wall flange (Make:- Hindware/ Jaquar/ Cera)
S&F 20mm CPVC brass elbow Complete all as specified and directed.
S&F 20mm CPVC brass Tee Complete all as specified and directed.
S&F 20mm CPVC brass FTA/MTA Complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
M&L for suspended false ceilling system using chicogo metalic (E grid) exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 4mm thick HPSC ( High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system duly suspended with 6 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips (Wt- 0.007 Kg/clip) hold down clips (Wt - 0.0035 Kg/clip) with Provn of light fixture complete all as directed. Make- EVEREST or other equivalent as approved.
Taking down carefully copper/ aluminium point wiring i.e. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc.
M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, passing through PVC casing caping including accessories and provision of PVC box for mounting of modular Switchs & Sockets as required at site as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly for the following:- NOTE : Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. Make of wire:- Polycab/Finolex/Plaza/Havells. Casing Capping:- Precision/Presto Plast/National/Pressfit.
One light/Exhaust/Ceiling fan point controlled by one switch.
One 3 pin switch socket combination 5 Amps on the same board with other switches.
One 3 pin switch socket combination 5 Amps, independent.
All as per item No 117.00 above but with 2.5 sqmm cable for one three pin 15 Amps socket out let controlled by one switch.
S & F modular switch, 1 module, single pole one way 6 Amp conforming to IS:3854 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Rider)/Legrand(Britzy).
S & F modular switch, 1 module, single pole one way 16 Amp conforming to IS:3854 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Rider)/Legrand(Britzy).
S & F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm
S & F modular socket 6A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Rider)/Legrand(Britzy).
S & F modular socket 6/16A, 3 pin, 2 module conforming to IS:1293 : 2019 and ISI marked complete all as direcred. Make - Crabtree(Athena)/Anchor(Rider)/Legrand(Britzy).
S & F modular PVC Gang box, screwless of 8 module for mounting of modular switches and sockets including blank plate for blank module. Make -Crabtree(Athena)/Anchor(Rider)/Legrand(Britzy).
All as per Item No- 124.00 above but of modular PVC Gang box, 4 module.
All as per Item No- 124.00 above but of modular PVC Gang box, 3 module.
S&F modular white cover plate with frame, 8 module.
S&F modular white cover plate with frame, 4 module.
S&F modular white cover plate with frame, 3 module.
Taking down unserviceable FTL/batten fittings with supply and fix LED integrated polycarbonate housing of batten of 10 Watt 2ft LED give minimum output lumen 1150 lm, efficiency >110, CCT 4000/6500K, CRI >80, power factor >0.9, operating temperature 45 degree celcious, THD <20% of housing polycarbonate extrusion with LED dimension 603mmx22mmx36mm upto 50% energy saving. Make : Bajaj, Crompton, Philips, Havells, Jaquar
S&F MCB DB SPN conforming to IP 43 - IK 09 with acrylic door, 8 way complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces by plastering or PCC work inclding distembering to the affetced to walls. Make:- ABB/Legrand/Siemens.
S&F MCB SPN, 6 to 32 Amp, 10 KA, 230 Volt.Make:- ABB/Legrand/Siemens.
S&F MCB SP, 6 to 32 Amp, 10 KA, 230 Volt.Make:- ABB/Legrand/Siemens.
S&F in relplacement with unsheathed three runs multi stranded copper conductor 6 sqmm, 1100 volts grade cable, FRLS stranded copper conductor cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC conduit not less than 20mm including taking out old one all as directed. Make of wire - Polycab/Plaza/Finolex/ Havells/L&T.
Supply and fix surface mountig LED 36 watt 2x2 luminaire of enhance the delight of occupants with each comfortable experience through is classic design & glare free soft illumination. White powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover including making all electrical connection complete all as specified and directed by Engr-in-Charge. Make : Bajaj, Crompton, Philips, Havells, Jaquar
Taking out unserviceable exhaust fan and deposit to MES store, supply and replacement with exhaust fan, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 300mm sweep having power input 70W speed 1440 RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated (Make:- Havells/ Crompton/ Bajaj/ Usha/ Almonard)
Material & labour for sand cushioning under interlocking paver blocks watering and compact complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 , M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand complete
Unity Enterprises
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .