SPECIAL REPAIRS TO JOINERY IN OFFICERS MD ACCN AND CERTAIN REV AND MINOR WORK UNDER OD AND ARMY AREA UNDER GE AVADI

Amount

Taking down chowkats or frame exc. 1.50 sqm but not exc 4.00 sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed.

Taking down Chowkhats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Material and labour for 2nd class hard wood Plain, solid, straight chowkats and frames rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter all as directed.

Supply and fix mild steel flat iron as in hold fasts fixed to chowkats conforming to Fe-290.Gde-E-165 etc., complete all as specified and as directed.

Material and labour for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.6 sq. m each with tar or coal tar black paint complete all as specified and as directed.

Material and labour for preparing and treating small articles such as hold fasts with coal tar black paint, area tarred not exc. 0.10 sqm including sanding of newly tarred or painted surfaces with clean sharp sand complete all as specified or as directed.

Supply and fix 2nd class hard wood 35mm thick, factory made, Plain framed, panelled door shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated E16 all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood Glazed and skeleton shutters, (Partly panelled and partly glazed/gauzed) open rebated and prepared to receive glass, gauze, etc. (without sash bars) and partly panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces and edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed. Note: Glass panel and wire gauze shall be measured and paid under respective items separately

Supply and fix 30mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Supply and fix anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Material and labour for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

Material and labour for Anodised aluminium window shutters, sliding type, aluminium sections weighing n. less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

Supply and fix for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed.

Supply & Fix aluminium anodised (Deco) pattern grill 75x75mm size design No 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and direcetd.

Material and labour for Forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work with CM 1:6 complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane all as specified and as directed.

Supply and fix 4mm thick figured glass, pin headed type, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane all as specified and as directed.

Supply and fix stainless steel wire cloth 0.36mm, nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed.

Supply and fix solid PVC door frame of size 50 x 47mm made out of 5mm plain coloured PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mm X 15mm MS Square tube inside the drilling 100mm long MS Screws using PVC fastener complete, in opening all as specified and as directed. Note :- (i) Existing/ new wall edges shall be finished properly in Cement Mortar (1:4) including supply and fixing of 6 Nos wooden plugs for catch door frame size n. exc. 17Sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw 3 each on either side.

Supply and fix factory made EPS core solid PVC door shutter with wood free EPS board 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face. The door on all the edges to be sealed with lipping of 10mm (5mm x 2) thick X25mm wide PVC sheet for 3 sides and 60mm wide PVC sheet for lock side. The lipping shall be bonded to the 2mm moulded / plain PVC sheet with solvent cement complete all as specified and as directed.

Supply and fix butt hinges, medium weight size 100 mm, cold rolled mild steel fixed with cadmium screws complete all as specified and as directed.

Supply and fix butt hinges, medium weight size 125 mm, cold rolled mild steel fixed with cadmium screws complete all as specified and as directed.

Supply and fix aluminium handles cast type, anodised, 125mm long as directed.

Supply and fix aluminium handles cast type, anodised, 150mm long as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section 100 mm long and fixed with screws as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws as directed.

Supply and fix Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and as directed.

Supply and fix Aluminium Mortice lock, vertical type, size 100mm, 4 levers all as specified and as directed

Material and labour for preparation of newly plasterd surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed .

Material and labour for preparing new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed.

Material and Labour for hard core of gauge not exc 63mm of broken stone, deposited , spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for 100 mm thick, PCC 1:5:10, type E2 (using 40 mm graded stone aggrigate) as in sub base of floor all as spacified and directed.

Material and labour for dry river sand as in cushioning 75 mm thick spread, levelled uniformely and consolidating etc, all as specified.

Material and labour for Machine pressed precast concrete interlocking paver block of 60mm thick any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and no pigment all as specified and as directed.

Material and labour for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Removal of excavated surplus soil to a distance exc 250 metre and not exc 500 metre and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for 75 mm thick, PCC 1:4:8 type D2, using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Material and Labour for 75 mm thick, PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring complete all as specified and as directed.

Material and Labour for 20mm wear proof topping as specified (incorporating an approved metallic floor hardener), laid on concrete floors and pavings, and finished even and smooth (except metallic hardener) complete all as specified and as directed. Note:- Metallic floor hardener to be measured and paid seperately

Supply only metallic floor hardener

Surface dressing n exc 15 cm deep and getting out in Hard/ dense soil complete all as specified and as directed..

Excavation in trenches not exc 1.5m wide and not exc 1.50m deep and getting out in hard/dense soil all as directed.

Material and labour for Plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Material and Labour for PCC 1:2:4, type B1, using 20mm graded stone aggregate as in bed plates, slabs and in coping finished even and smooth without using extra cement. all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick using soil obtained from excavation all as directed.

Material and Labour for 50 mm thick, PCC 1:2:4 type B1 using 20mm graded stone aggregate as in flooring and finishing cement concrete surface even and smooth using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:4 and rendering is to be finish even and fair with out using extra cement.

Material and labour for preparing the newly plastered surfaces of wall and applying two coats of cement based paint over one coat of primer all as specified and as directed.

Material and labour for DPC to horizontal surfaces in cement concrete 1:2:4 type B0, 25mm thick including necessary form work complete all as specified and as directed.

Material and Labour for Reinforcement cement concrete 1:2:4, type B1, using 20mm graded stone aggregates in beams, cantilever beams, lintels over 1.5 m span etc complete all as specified and as directed.

Material and Labour for Reinforced cement concrete 1:2:4 type B1, using 20mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies,deck slabs and in shelves and the like etc complete all as specified and as directed.

Material and Labour for Reinforcement cement concrete 1:2:4 type B1, using 20 mm graded aggregates in chajjas complete all as specified and as directed.

Material and Labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or Sloping) complete all as specified and directed.

Material and Labour for form work to sides and soffits of chajja for fair finished flat surface of concrete complete all as specified and as directed.

Material and Labour for form work to edges of concrete not exc 200mm wide for fair finished flat surface of concrete complete all as specified and as directed.

Material and Labour for 40mm thick PCC 1:2:4 type B1, using 20mm graded stone aggregate as in flooring, Finishing cement concrete surface even and smooth using extra cement all as directed.

Material and Labour for 75 mm thick, PCC 1:3:6 type C1, using 20mm graded stone aggregate laid in panels surface finished even and fair as in plinth protection complete all as specified and as directed.

Material and Labour for forming construction joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Material and Labour for TMT bars 6 to 8mm dia, cut to length, bent to shape reqd including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.90 mm dia all as specified and as directed.

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

Supply and fix for Glavanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fix 3mm thick sheet galss, ordinary quality and glazing with oil putty in squares not exc 0.5Sqm each pane all as specified and as directed.

Material and labour for rendering 10mm thick on fair faces of brick or concrete surface of wall in CM 1:4 and finishing the surface even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 5mm thick on concrete surfaces of ceiling in CM 1:3 and finishing the surface even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15 mm thick on other than fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and fair with out using extra cement.

Material and labour for preparing the newly plastered surfaces of wall and applying three coats of white wash all as specified and as directed.

Material and labour for preparing the newly plastered surfaces of ceiling and applying two coats of white wash all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed of capacity 1000 ltrs.

Supply and fix 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe all as specified and as directed.

Supply and fix 20 mm dia Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and as directed.

Supply and fix in bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed all as specified and directed. (minimum weight 90gms).

Supply and fix 15mm dia stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified and directed. (minimum weight 90gms).

Supply and fix PVC connection 15mm dia length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

Supply and fix 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) bend any radius all as specified and directed.

Supply & Fix Vitreous china squatting pan of 'Orissa' pattern of size 580mmx 440mm white with "integral foot rests", complete including provision of lime concrete bedding all as specified and as directed.

Supply and fix 10 litres capacity PVC valveless syphonic action type flushing cistern low level white , with inlet ball valve, float and handle including bracket with outlet pipe 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300x7mm), over and including 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 300X200X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed.

Supply and fix 15 mm dia galvanized iron tube medium grade with all fittings such as bends, elbows , socket, reducer and fixed to wall, ceiling or laid in floors all as specified and as directed.

Supply and fix 20 mm dia galvanized iron tube medium grade with all fittings such as bends, elbows , socket, reducer and fixed to wall, ceiling or laid in floors all as specified and as directed.

Supply and fix, 75mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 all as specified and as directed.

Supply and fix, 125 mm long aluminium barrel tower bolts, of extruded section and fixed complete all as specified and as directed.

Excavation in post holes in any type of soil, not exc 0.50 cum in each post, getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance not exc 50 M all as specified and as directed.

Material and labour for Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths) conforming to Fe 410 -W (Gde E 250) quality A complete all as specified and as directed. .

Supply and fix mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality ‘A’ complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note:-(i) End laps not less than 25cm and side lap at least one corrugation, Mastic lapping tape is to be provided at the laps and stitching screws should be provided at the side lap & end laps at interval of 600mm, eaves filler strip to be bonded to the valleys or pans with flexible water proof silicon sealant. Self tapping screw 65mm long and 32mm long is to be provided at crest and valleys respectively. (ii) Unit rate is deemed to be inclusive of sealant .

Material and Labour for mild steel screw bolts (machine Made) with hexagonal or square heads at one end and screwed the other to be fitted with washer and one hexagonal or square nut n exc 5 cm long, dia of shank 5 to 10 mm complete all as specified and as directed.

Supply and Fix for Compound griders and stanchions, lattice girders, aerial masts, staging for water tanks and and like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates incluind all latticer bars stiffeners, gusses plate etc., complete all as specified and directed.

Supply and Fix 1 mm thick mild steel plain black sheet covering to doors, steel gates and similar work, cut to size, edge beaded if directed, holes punched , including round headed screws, clout nails or rivets and fixed to wood or steel framing, etc with plain 40 mm lap joints with riveted or welded seams including bending, turning up, mitred angles, etc as required complete all as specified and as directed.

Supply and fix rotational moulded polyethelene water storage tanks(cylindercal with closed top) three layered hoisted and fixed in position all as specified in SSR Part I of capacity 2000 Litres including taking down old one.

Supply and fix 20 mm GI tubing, medium grade with all fittings and fixtures complete to walls & ceilings or laid in floors all as specified and as directed.

Supply and fix 25 mm GI tubing, medium grade with all fittings and fixtures complete to walls & ceilings or laid in floors all as specified and as directed.

Supply and fix of 25 mm size gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Material and Labour for pre-cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs for drains and setting in CM 1:6 complete with joints to match, including necessary forms and moulds all as directed.

M/s Omm Muruga Enterprises

S K ENTERPRISES

D Subramani and Sons

RUBYONEBUILDERS