REPAIR / MAINT / REPLACEMENT OF AERODOME BEACON LIGHTS, RUNWAY LIGHTS, CCR, BOLLARD LIGHTS , LT CABLES, LT POLES, LT PANELS, EARTHINGS, MOTORISED DOOR, CRANE AND OTHER E/M RELATED WORKS IN AOP AREA UNDER GE NASIK ROAD.

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

All as item No 1 above but exc 1.5 mtr in deep but not exc. 3 mtr

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer - in - Charge.

Supply, fixing and connecting Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50sqmm to 95 Sqmm complete all as specified and directed.

Supply, fixing and connecting Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated, screened, PVC bedded galvanised steel strip armoured electric power cable (Heavy duty) with aluminium conductor, 11000 Volts grade lay in trenches, ducts, along pole, along Transformer cross sectional area 95 Sqmm 3 Core complete all as specified and directed.

Supply, fixing and connecting Cable jointing kit for 11 KV (Earthed) grade cable for outdoor straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm complete all as specified and directed.

Supply and fixing in replacement of lightening arrestor explusion type complete with fittings, transmission class, discharge capacity 65 kiloamps of 11 KV volt.

M&L for maintenance of thyristor type NASU make CCR including repairing of defective CCRs by identifying the fault, replacement of defective PCBs and other components and service the same including caliberation of CCR and complete checking, servicing of quarterly base etc as required all as specified and directed. Note: Spare parts required will be measured and paid separately under respective items. (The rates are inclusive of three visits in nine months ) Note for Servicing items of the Schedule:- Note:- 1) The above Item Includes following a) Labour Charges for Major and Minor repairs including Overhauls b) Labour charges for all unlimited Breakdown Complaints related to CCR for a period of nine months c) Preventive Maintenanace 3 visit in nine months (qtrly based ) to carry out Inspection 2) The above Item excludes following a) Cost of consumables and spares parts require for preventive or breakdown Visits. Note :-3) The Spare Parts, used for work under contract must be Purchased from Authorised Dealership. Note:-4) All works under contract must be carried out by AMA/ NASU Trained Service Engineers. Spare Dealership to have a quick /urgent hastle free service to restore the system in minimum time frame Note:-5) Any delayed in service after site order, penalty will Rs. 10000/- per day recovered from Contractor.

M&L for 20 KW CCR main control card including RMS to DC convertor card etc as required all as specified and directed.

M&L for Insulation Monitor card.

M&L for Over current Trip- card.

M&L for Relay card.

M&L for TTM Card ( 02 Nos)

M&L for plug in type relays : VDC ( 01 No for each CCR )

M&L for plug in type relays : 48 V DC suitable for 11 pin socket.

M&L for plug in type relays : 240V AC ( 1 No for each CCR )

M&L for T1 300 Trip indication fuses

M&L for high speed semi-conductor protection fuses GS 1000/100 (01 no each for 20 KW CCR)

M&L for thyristors : H 150 TB 15 ( 02 nos each for 20 KW CCR )

M&L for HRC Fuse link :100 Amps ( 2nos each 20 KW CCR)

M&L for HRC Fuse link : 32 Amps ( 1 nos each 20 KW CCR)

M&L for HRC Fuse link : 4 Amps ( 1 nos each for each CCR)

M&L for Digital TRUE RMS METERS: 10 Amp/1 AMP (1 No for each 20 KW CCR)

M&L for Digital TRUE RMS METERS: 100 Micro Amp DC coil moving meter ( 96X96).1 each

M&L for Lighting arrestors: 4.5 KV grade (2 nos each for all rating of CCR's)

M&L for 2 Pole 8 way brillancy switch (Totary wafer, MBB type) (1 Each for each rating of CCR)

M&L for Power transmission MJ11016 (2 Nos each for all rating of CCR's

M&L for 72A contactors suitable for NASU. Make CCRS ( 20 KW)

Supply and fixing in replacement of synthetic insulating mat 2.5 mm thick for voltage upto 11 KV for electrical purpose as per IS 15652-2006 suitable for electrical shock safety of size 2mtr x 1 mtr.

Dismantling steel poles/ struts, any type and taking aside.

S&F in repairs Isolating Transformer 15 watt, 6.6 Amp, 500 Volt grade all as specified and directed.

S&F in repairs Isolating Transformer 200 watt, 6.6 Amp, 500 Volt grade all as specified and directed..

Supply and fixing in replacement of rolled mild steel work such as joint, channel, angle, or tee sections, fixed indpendently, without connecting plates, etc. (cut to ordinari lengths i.e. within 20mm of the length indicated, complete all as specified and directed. (Stand suitable for fixing LED Taxyway Edge Light approximately 10 Kg per stand x 10 Nos = 200 Kg)

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 90mm and innter dia 75mm including 90 degree bends with coupler and rubber ring laid in trenches of size 90 mm suitable for cable protection of size 70 sqmm to 95 sqmm cable complete all as specified and directed.

Supply and fixing in replacement of XLPE insulated armoured and PVC sheated heavy duty electric cable of size 2 core 10 sqmm aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete. Note: Rate is inclusive of taking out old unsv cable, cable gland & cable lugs.

All as per Srl item No 37 here in before but 4 core 16 sqmm

All as per Srl item No 37 here in before but 3.5 core 35 sqmm

All as per Srl item No 37 here in before but 3.5 core 50 sqmm

All as per Srl item No 37 here in before but 3.5 core 95 sqmm

All as per Srl item No 37 here in before but 3.5 core 120 sqmm

M&L for Plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for coaping of pole

M&L for Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as specified.

EXCAVATION BY TENCHLESS TECH - Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia. Suitable for 0.4 mpa working pressure.

M&L for Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and innter dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50 mm suitable for cable protection complete all as specified and directed.

S&F in repairs cable jointing kit of size 4 core 16 sqmm to 50 sqmm all as specified and directed.

S&F in repairs cable jointing kit of size 3.5 core 50 sqmm to 95 sqmm all as specified and directed.

S&F in replacement of LIARA IP 65 rated inverted Pyramid Tripod type LED Bollard with soft 360 deg light distribution all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 45 W Decorative indirect post top landscape lighting with IP -65 protection , resistance to impact and corrosion , Anti-glare and uniform distribution all as specified and directed.

Supply and fix LED aviation lighting with cast aluminium housing and polycarbonate all as specified and directed by Engr-in-Charge.

Supply, fix, connect and test in replacement of LED street light fitting 60W, pressure die cast aluminum housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway luminiare with excellent thermal management, complete all as specified and directed.

S&F in repairs 80 W LED flood light fitting, pressure die cast with IP 66 protection, efficient high output emmitter LED for better distribusion, surge protection device 5KV upto rated power 150 W , complete all as specified and directed.

S&F in repaires PVC insulated 3 core 1.5 sqmm multistranded (un armoured 2XY) copper conductor complete all as specified and directed.

S&F in repairs LED outdoor drivers, suitable for 40-45W street light fitting all as specified and directed.

S&F in repairs power contactors ML-3 , 3 pole rating not less than 40A , 230 coil. All as specified and directed.

S&F in repairs AlphaRex3 digital time switches D-22 astro , multifunctional digital time switches all as specified and directed by Engineer-in-Charge.

S&F junction box of Size 250 x 200 x 100mm complete with industrial connector including clamps made out of MS flat iron 30 x 5mm and suitable MCB of 6 amp, SPN as specified and directed.

All as per Item No. 58.00 but Size 185 x 165 x 60 mm

Supply, install erect in trench vertical position steel tubular seweaged welded poles complete with MS base plate of 6mm thick of size 450mm x 450mm finial taper plug pole cap, bolts, nut and screwed, pole made out of ERW MS tubing confirming to IS 2713 Part II of 11 mtr long 410 SP-31 including drilling of holes of required size and nos for fixing of cross arms bracing support/ taking out of cables etc, and painting with one coat of red oxide primer and two coat of aluminium paint for exposed surface and two coat of black bituminious paint for the portion embeded in concerete complete all as specified and as directed by Engineer -in-charge.

Supply, fixing and install in replacement of 7 mtr height octagonal pole top 70 mm, bottom 130 mm, 3 mm thikness with base plate 200x200x12 mm and GI 64 micron, M19x600 EN 8 grade foundaction bolt and 1 mtr arm for light fittings complete including foundation drawing provided by OEM for foundation of pole. Note : Rate for RCC foundation as per drawing, Excavation, returning filling, 7mtr pole, foundation bolts and nuts included in this item rate.

Supply and fixing in replacement of Switch air break gang operated triple pole mechanically operated mounted on insulator and steel frame out door type suitable for vertical installation single brake provided with locking arrangement, consisting of MS channel ,HT post type insulator ,copper alloy high pressure assembly, operating rod of GI pipe medium grade confirming to IS-1818 of 1972 ,suitable for 11000 volt ,400 Amps incl dismantling of old one all as specified.

Supply and fixing in replacement of horn gap unit explusion type for outdoor air break switch (GOD) single pole, mounted on and including insulators for 11000 Volts working pressure fixed to and including MS channel with nuts, bolts, washers etc. synthetic bounded fuse carrying tube complete with line tabs and suitable for current carrying capacity upto 10-60 Amps only all as specified and directed.

S&F Cross arms ,bracings,supports,clamps and back plate fabricated from structural steel sections including nuts ,bolts, in any shape or size as indicated or directed and inclusive of two coat of aluminium paint over a coat of red oxide .

M&L for scrapping the existing deterioted old alumininum paint by iron brushing and painting of steel tubular poles of (9.0 mtr length) with one coat of metal primer and two coat of aluminium paint over exposed portion of pole above PCC coping including cross arms, angles, nut, bolts, clamps and S&F new radium sticker Radium paint / sticker of different colour 80 cm above coping of pole, i.e. alernatively with sky blue / red & white radium sticker (10 cm - 04 sky blue / red strip and 10 cm - 04 white strip) complete circumference of any type any shape pole and cement base paint on coping portion, marking of pole nos with radium yello / black paint /steekar in round shape 15 cm dia with letter writing 5 cm height 5 mm width etc. complete all as specified and directed at site.complete all as specified and directed at site by Engineer-in-Charge

M&L for cable jointing kit for 11 KV ( Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed by Engr-in-Charge

M&L for cable jointing kit for 11 KV ( Earthed) grade cable for outdoor termination Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 3 core 95 sqmm all as specified and directed by Engr-in-Charge

M&L for Earthing with 600X600X6 mm thick , galvanised steel earth plate electrode buried vertically in ground (Earth pit not less than 2.25 meter deep below normal ground level ) with top edge of plate vertically at a depth ,not less than 1.5 m below ground level connected to and including GI strip of size 32X6 mm by means of bolts,nuts,check nuts, And washer of galvanised steel, Gi shrip to be provide upto the extent of 7.5 m GI strip to be duly connected to metalic bodies of HT/LT equipment with provision of mixture of charcoal dust & common salt packed all ground the earth plate upto MS funnel with wire mesh provided inside concrete earth pit for watering arrangement,complete all as shown on electrical plate no.3 of SSR Part I (2009) and testing on completion.

S & F in replacement of MCCB 4 pole in LT Panel thermal magnetic setting of current amp 400A , breaking capacity 25kA, of make legrand complete with lugs ,spreader link, gland to cable complete all as specified and directed.

S & F in replacement of MCCB 4 pole in LT Panel thermal magnetic setting of current amp 250 A , breaking capacity 25kA, of complete with lugs ,spreader link, gland to cable complete all as specified and directed.

S & F in replacement of MCCB TPN in LT Panel thermal magnetic setting of current amp 160A , breaking capacity 25kA, of complete with lugs, spreader link, gland to cable complete all as specified and directed.

S & F in replacement of MCCB TP in LT Panel thermal magnetic setting of current amp 125A , breaking capacity 16kA, complete with lugs ,spreader link, gland to cable complete all as specified and directed by Engr-In-Charge.

S & F in replacement of MCCB TP in LT Panel thermal magnetic setting of current amp 100A , breaking capacity 16kA, complete with lugs ,spreader link, gland to cable complete all as specified and directed directed by Engr-In-Charge.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS.2,31,120.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

DURGAI ELECTRICALS

Datar Electrical and Engg Services

Bidder Name

Datar Electrical and Engg Services

MAHIMA CONSTRUCTION

DURGAI ELECTRICALS