MISC REPAIR TO B/R AND E/M WORKS INCL CONNECTED ITEMS IN POWER HOUSE/ PUMP HOUSE, OHT/ UG SUMP AND MISC BLDG AT DILLI POND, TIPU LINE AND BALIDAN STAMBH AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but one coat of white wash on ceiling complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but two coats of Oil bound distemper complete all as specified and as directed.

Description all as per Ser item No 1.00 here-in-before but applying two coats of cement based paint complete all as specified and as directed.

Material and labour for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed.

Taking down cement plaster of any description on bricks or stone walls or from concrete surfaces including racking out joints, hacking for key, scrubbing complete all as specified and as directed.

Material and labour rendering 10 mm thick cement mortar (1:6) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 15 mm thick cement mortar (1:4) on fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and labour rendering 5 mm thick cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour preparing plastered new surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

Material and labour preparation of new plastered wall surfaces and applying two coats of weather proof exterior emulsion paint over one coat of primer after making surfaces even and smooth, including any colour upto 12 mtr height complete all as specified and as directed. Colour as approved by Engineer-in-Charge.

Material and labour for preparation of plastered or unplastered surfaces of wall including cornices, pillasters by brooming down or steel wire smoke, root moulds moss and efflorescent salt and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of weather proof exterior emulsion paint, over one coat of primer after making surfaces even and smooth including any colour chajjas and fascias complete all as specified and as directed. (All scaffolding arrangement upto three storey building).

Complete removal of vegetations, roots and shrubs from wall and making good the wall with cement, brick work and plastering including all scaffolding upto 4 storey building complete all as specified and as directed.

Demolition of brick or stone/ boulders masonary, built in cement mortar including all quoins, arches, pillars etc, excluding ashlar facing dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and as directed.

Description all as per Ser item No 16.00 here-in-before but except bricks complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry, etc any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, barbed wire any type complete all as specified and as directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long dia of shank diameter of neck in 5 to 10 mm complete all as specified and as directed.

Material and labour Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fixing in repairs Galvanised, two strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc. complete all as specified and as directed. (Each line wire to be measured).

Material and labour mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply only mild steel galvanised chain link fencing having main wires of dia 5.3mm and cross wires of dia 3.6mm and oblong mesh size 100 x 150mm fixed to any type of straps, standards complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/ loose soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

Material and labour for cement concrete in foundations, filling and mass-concrete (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed.

Description all as per Ser item No 28.00 here-in-before but not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site complete all as specified and as directed.

Material and labour cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkhats bed block for holdfast and the like complete all as specified and as directed.

Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.24 (a), open rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc complete all as specified and as directed.

Supply and fixing pressed steel frames of size 105mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Supply and fixing pressed steel frames of size 125mm x 60mm made of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed. Note: - PCC for filling of hollow portion shall be measured and paid for separately.

Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying fixing in opening as per specification and drawing as in door complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in mild steel frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplied and fitted in the frame at site as per specification and drawings shown in SSR Part-II complete all as specified and as directed.

Supply and fixing Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's, mild steel tower bolts 150 mm long for each leaf and 8 mm square bar grill/ guard bars at spacing as shown on drawing welded to mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc all as shown on drawing No CEPZ/TD - 354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer. The following items shall also be included in quoted rate of this item: - (a) 3 mm thick sheet glass ordinary quality and glazing with oil putty in square. (b) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

Supply and fixing aluminium anodized powder coated (minimum thickness 50 micron) sliding window (Two track) consisting of two shutter of glazed and flyproof mesh fixed on external face of window frame with aluminium beads including all necessary fittings, the following items shall be included in quoted rate of this item: - (a) Aluminium powder coated frame of section 63.5 x 38.10 mm x 1.02 mm thick with or without rebate. (b) Aluminium powder coated window shutters of section 40 x 18 mm x 1.25 mm thick (Both shutter of glass and) including self locking catch and roller etc. (c) 4.0 mm thick coloured or tinted glass glazing as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket. (d) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and aluminium beads.

Description all as per Ser item 39.00 here-in-before but as in bath/ WC Vents (sliding up side) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing powder coated aluminium door shutter with chowkhats made out of hollow aluminium sections as mentioned below, each shutter having 2 No's ‘D’ type aluminium handles of 200 mm long, 2 No's aluminium tower bolts of 200 mm long and 1 No's mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly panelled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specified and as directed: - Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg./RM appx.) Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg./RM appx.) Bottom rail : 150.00 x 2.20 mm thick (2.376 Kg./RM appx.) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg./RM appx.) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg./RM appx.)

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 150 mm size and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts 200 mm size and fixed complete all as specified and as directed.

Supply and fixing 150 mm aluminium handle cast type complete all as specified and as directed.

Supply and fixing for Butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified and as directed.

Supply and fixing mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed/ welded to door frame complete all as specified and as directed.

Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty/ beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Description all as per Ser item No. 51.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and as directed.

Material and labour non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour Non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) in vertical surface such as skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour Non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.18 Sqm, in floors etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Material and labour Glazed ceramic tiles 300x450x7mm thick on vertical surface such as in skirting, dado etc. fixed with approved tile adhesive and provided with 4mm spacer, spacer gaps to be filled with approved epoxy grout complete all as specified and as directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete all as specified and as directed.

Material and labour Granite (of any type) 16-20mm thick (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cement mortar (1:6) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Supply and fixing Machine cut kota stone slab flooring 16-20mm thick over 15 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Machine cut kota stone slab 16-20mm thick over 10 mm thick as in vertical surface over rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Material and labour coloured chequered tiles of size 30cmx30cmx 25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment etc and screed bed or bedding layer of mortar 20mm thick (1:4) for laying floor finishes complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

Material and labour for mild steel work in tubular trusses or rectangular hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1239 (Part I -1990) complete all as specified and as directed.

Material and labour for rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Gde Fe-410-S complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MOD land complete all as specified and as directed.

Material and labour PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and as directed.

Material and labour PCC 25mm thick (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) in sub base for floor tiles complete all as specified and as directed.

Material and labour PCC 75mm thick (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in plinth protection/ path finished even and fair complete all as specified and as directed.

Material and labour PCC 75mm thick (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in sub base complete all as specified and as directed by Engineer-in-Charge.

Demolition of RCC of any description and in any position not otherwise specifically provided for and removing the debris complete all as specified and as directed. (Reinforcement cut as required to facilitate demolition).

Material and labour for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate), in cover slabs of ope drains including of form work and set in cement mortar (1:4) complete all as specified and as directed.

Material and labour for TMT bars of 10 mm dia and over cut to length bent to shape required and binding with mild steel wire (annealed) not less than 0.9 mm complete all as specified and as directed.

Supply and fixing in repairs cast copper chromium plated concealed stop cock screwed down high pressure capstan head with chromium plated flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismantling of tiles/ any surface finishes and making good complete all as specified and as directed.

Supply and fixing in repairs 15mm bore pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 500 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet and overflow pipe etc complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks three layers of 1000 litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old broken water tanks and refixing of inlet, outlet and over flow pipe etc complete all as specified and as directed.

Supply and fixing in repair Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) but including provision of lime concrete complete all as specified and as directed.

Supply and fixing in repair vitreous china washdown water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and fixing in repair PVC low level flushing cistern 10 litre capacity white with inlet ball valve, float valve and handle including brackets, PVC flush pipe complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and as directed.

Supply and fixing in repairs 15mm dia PVC connection with brass check nut of length 600mm complete all as specified and as directed.

Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.

Supply and fixing repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/Plastic cleats(Minimum weight 190 Gm) complete all as specified and as directed.

Supply and fixing in repairs Bib tap 15mm bore standard PTMT, any colour high pressure screwed for iron pipes and fixed in repairs complete all as specified and as directed.

Taking up or down GI tubing 15mm bore including removal to store complete all as specified and as directed.

Description all as per Ser item No 92.00 here-in-before but 20mm bore complete all as specified and as directed.

Supply and fixing steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Supply and fixing steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Refixing old steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

Supply and fixing in repairs 100 mm dia chromium plated steel grating with or without waste hole complete all as specified and as directed.

Supply and fixing in repairs 125 mm chromium plated stainless steel grating with or without waste hole complete all as specified and as directed.

Taking down eaves, gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.

Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and as directed.

Supply and fixing 110 mm PVC (SWR) Junction single (T) equal/ Unequal complete all as specified and as directed.

Supply and fixing PVC (SWR) bends/ shoes any radius of 75 mm dia complete all as specified and as directed.

Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.

Description all as per Ser item No 106.00 here-in-before but 75 mm dia complete all as specified and as directed.

Taking down rolling shutters of sizes, area not exceeding 8 Sqm each, replacing worn out/ unserviceable parts with new ones, overhauling, applying grease/oil, refixing in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Description all as per Ser item No 108.00 here-in-before area exceeding 8 Sqm but not exceeding 12 Sqm each complete all as specified and as directed.

Material and labour for overhauling of rolling shutter of area not exceeding 8 Sqm (without taking down from position but by opening hood cover), applying grease for trouble free operation, refixing the hood cover in position and making functional complete all as specified and as directed. Note: - Replacement of parts will be measured and paid for separately in respective items.

Description all as per Ser item No 110.00 here-in-before area exceeding 8 Sqm but not exceeding 12 Sqm each complete all as specified and as directed.

Description all as per Ser item No 110.00 here-in-before area exceeding 12 Sqm but not exceeding 20 Sqm each complete all as specified and as directed.

Supply and fixing in repairs mild steel worn wheel and gear wheel fitted to suspension shaft of the rolling shutter and connecting rod respectively complete all as specified and as directed. Note: - Suspension shaft and connecting rod will be measured and paid for separately.

Supply and fixing in repairs mild steel sheet 1.00mm thick as in hood cover of any shape with flat iron stiffeners at both edges and fixed to the bracket plate complete all as specified and as directed. Note: - Stiffeners will be measured and paid for separately.

Supply and fixing in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Supply and fixing in repairs mild steel guide channel of size 65mm depth, 25mm width and 3.15mm thick including fixing of cleats or supports (not exceeding 750mm centre to centre) for attachment to the wall or column by means of bolts or screws complete all as specified and as directed.

Supply and fixing in repairs 25mm dia mild steel connecting rod fitted to gear wheel and bevel gear complete all as specified and as directed.

Supply and fixing in repairs lath section made from cold rolled steel strips 1.20 mm thick with interlocking curls at both edges and a deep corrugation at the centre with a bridge depth of not less than 12 mm and each lath section shall be continuous single piece without any welding joint complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper/ aluminium point wiring concealed/ batten (light, fan, socket or power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour for point wiring for one light/ fan/ call bell point controlled by one 5 Amp switch with 1.5 Sqmm two single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/ steel conduit and cast iron/ pressed steel terminal boxes including 3.0mm thick hylum brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Notes: - (a) Wiring shall be done by using proper colour coding including making disturbed surface good. (b) Earth wire shall be of green colour. (c) On RCC roof/ ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description all as per Ser item No 121.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and as directed.

Description all as per Ser item No 121.00 here-in-before but for multi 3 pin socket outlet 5 Amps socket on independent board complete all as specified and as directed.

Description all as per Ser item No 121.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green colour complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing piano type switch 1 way 6A, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing socket 6A-5 pin combined, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing switch piano, flush type single pole one way 15 Amps, 240 Volts ISI marked complete all as specified and as directed.

Supply and fixing socket outlet 3 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked all as specified and as directed.

Supply and fixing ceiling rose, 3 Phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.

Supply and fixing of fan step regulator, 120W, 1 module, 240 Volts ISI marked complete all as specified and as directed.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing LED light fittings 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/ Watt, 6500K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts, 50 Hz complete all as specified and as directed.

Supply and fixing LED light fittings 1 X 9W / 1 X 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Material and labour in replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of MCB SPN 40 to 63 Amp rating 240 V, 10 KA 'B' curve in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement of 5 to 32 Amp MCB 240V, 10 KA, 'B' curve miniature circuit braker (MCB) of single poles in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fxiing in replacement LED security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant with IP-65/66 protection complete all as specified and as directed.

Supply and fixing of 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable of size 16 Sqmm flat or circular complete all as specified and as directed.

M/S VED PAUL MAHAJAN (BID ID -3343125)

M/S PRITHIVI RAJ AND SONS (BID ID -3341277)

M/S Sukhmani Construction Co. (BID ID -3342998)

M/S TRIKUTA BUILDERS (BID ID -3350324)