SPL REPAIR TO BLDG NO T 86 SINGLE JCOS LIVING ACCN OF DOU AND TOILET BLOCK FOR JCOS MESS OF EME BN UNDER GE SATWARI

Amount

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises,all as specified and directed.

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc.,all as specified and directed.

Taking down cement plaster on brick or stone walls etc incl raking out joints hacking for key and scapping down with water etc all as specified and as directed.

M&L 16-18mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4, brushing neat cement slurry with 3.00 kg of cement per sq. metre all as specified and as directed.

All as per Item No.4 above but 12mm thick for vertical surfaces over a backing coat of CM 1:4, 15 mm thick complete etc,all as specified and as directed.

Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations,all as specified and directed.

Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. ( sample as approved & kept in GE's sample room)

Material and labour glazed ceramic coloured Digital tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified. (Sample as approved & Kept in GE's sample room)

Material and labour Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match over and including 15 mm thick screed bed in CM 1:4. (Sample as approved & Kept in GE's sample room)

Description all as item No 09 but as in vertical surfaces dado/skirting over and including a backing coat of CM 1:4, 10 mm thick complete.

M&L for plain cement concrete (1:2:4) Type-B0 (12.50mm graded crushed stone aggregate) Nominal mix in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided including necessary for work, complete all as specified and as directed by Engineer-in-charge

Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ-70 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Dismantling of ceiling board(Fibre,pulp,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets.

Dismantling of wroght iron or mild steel work (angle iron) of any description not other wise provided in any positon complete all as specified.

Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 4mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe 410-W(Gde E- 250) quality A,complete and all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.00 sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and direcetd.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm including making good of jambs of opening with rendering in cement mortar 1:4, complete all as specified and direcetd.

S&F pressed steel frames of size 125mm x 60mm made out of size 1.25mm thick MS sheet for doors double rebated including mild steel hinges medium weight 100 mm long and 25mm x 3mm flat iron in holdfast,tie bar including necessary fixing lugs, hold fast, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including PCC 1:3:6 as in back fill to chowkats all as Specified. Make:- Shivam Steel, Jammu

Supply and fixing Factory made, plain framed, panelled shutter (two Panel) 35mm thick, 2nd class Hardwood with lock rail and panel of 9 mm B.W.P commercial ply. The size of rail and stiles as per as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as directed by Engr-in-Charge.

Supply and fixing 35mm thick 2nd Class hard wood glazed, gauzed and skelton shutters open rebated and prepare to receive glass, gauge etc but divided into squares with plain chamfered or rounded mitred and rebated sash bars, stiles and rails as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs.

Ditto all as per item No 59 but in Ventilators any size.

Supply and fixing Mild steel framed work such as grills, gratings,etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders; framed balusters; walk ways, railings, framework of water tanks and similar work conforming to Fe 290.Gde-E-165.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 sqm each and removing from the site all as specified & directed.

S&F 4 mm thick sheet glass ordinary quality glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty or any type of beads in square n.exc. 0.5 Sq each pane in any type of frame of iron/Steel/Wood/Aluminium as required at site complete all as specified (upto fourth storey with necessary scaffolding), all as specified.

Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or fixed with stainless steel wire staples complete all as specified.

M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation complete all as specified.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified.

Taking down of old/unserviceable kitchen cabinet/cupboard including all fixture and fitting, complete all as specified and directed. Note: For measurement superficial area in elevation shall be measured.

S&F Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Note : Piano hinges measured separately.

S&F Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all as specified and as directed by Engr-in-Charge.

S&F continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

S&F hasp & staple safety type aluminium anodised with mild steel hinges Spin including bolt to hinges plate fixed with screws of 75 mm in length.

S&F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium handles, fabricated type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

S&F Aluminium anodised, barrel tower bolts size 150 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows.( Including necessary fittings)

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Material and labour for brick work in cement mortar 1:6 using sub-class B bricks straight or curved on plan exc 6m mean radius all as specified.

Material and labour for brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified.

Dismantling water tanks and removing to store of water storage tanks (Cap.250 ltr to 500 ltr ) complete all as specified and directed by Engineer-in-charge.

Supply and fixing Rotational moulded polyethylene water storage tanks of 500 litres capacity, (cylindrical vertical with closed top) with plastic lid cover, triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including PTMT Ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified.

Ditto all as per item 51 above but except water tank, all as specified

S&F 25mm thick pre-formed filler for crumple joint all as specified and directed.

Taking up or down steel tubing of 20 mm bore pipe and connections,including cleaning for re-fixing or removal to store, complete all as specified and as directed

Supply and fixing tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

S&F in repair Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. ( ISI Marked)

Demolition of cement concrete (unreinforced) ground floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified.

Material and labour 75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

M&L for rendering 10mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6, rendering is to be finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:4 , rendering is to be finished even and fair without using extra cement (up to 4th storey with necessary scaffolding) complete all as specified.

Material and labour for rendering 10 mm thick on fair faces of brick or concrete surface ceilings, in cement mortar 1:3, rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, fixing in repair, complete all as specified and as directed by Engineer-in-charge. Make:- Cera, Cat No- B1010109 ( CONGO) or equivalent in Jaquar/ Hindware.

Supply and fixing in repair Vitreous china ware pedestal type water closet white, with 'P' or 'S' trap including self closing seat cover, closed pattern with flat bottom,complete all as directed. Make:- Cera, Cat Part No- S1053101 or equivalent in Jaquar/ Hindware.

S&F in repair angle valve with wall flange, cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified. Make:- Jainko, Essco, Parko.

S&F in repairs 15mm dia CP mixer for mixing hot & cold water screwed down for iron pipe screwed down for iron pipe. Make:- Jainko, Essco, Parko, Prayag

S&F in repair Vitreous China, wash basin white, flat back , size 550mmx400 including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling of chromium plated brass. complete all as specified and as directed by Engineer-in-charge.. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair fancy type pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with orwithout lettered 'Hot' or 'Cold' withlong screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed. Make:- Jainko, Essco, Parko, Prayag

S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Jainko, Essco, Parko, Prayag

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. Make:- Jainko, Essco, Parko, Prayag

S&F in repair PVC connection 15 mm x 600 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Jainko, Essco, Parko, Prayag

S&F in repair Jet Spray (Stainless Steel) with 1.5 meter Tube complete all as specified. Make:- Prayag, Cat No- BEA-17 or equivalent in Jainko, Essco, Parko.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make:- Jainko, Essco, Parko, Prayag

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165, all as specified.

M&L for preparation of old decorated concrete/ plastered surfaces of walls, pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including two coats of wall care putty of 1 to 2 mm thick on uneven surface as and where required.

M&L for preparation of new plastered surfaces of walls & applying two coats of oil emulsion distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M&L for preparation of new decorated brick /concrete plastered /un-plastered surfaces and applying three coats of white wash on ceiling.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces and applying one coat of white wash on ceiling.

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding up to 4th storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M&L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M&L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on the walls, pillars, cornices etc. complete all as specified and directed.

Supply only Water proofing compound liquid.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC 1:4:8 type-D2 (40mm graded aggregate) as in foundations, filling and mass concrete.sub base as in floors complete all as specified and as directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for brick work with sub class `B' bricks straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 complete all as specified and as directed.

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/ loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and as directed.

M&L RCC type B1, 1:2:4 (20mm graded aggregate) as in, foundation, including rafts, footings, foundation beams, pinth beams, bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC type B1, 1:2:4 (20mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

M&L RCC type B1, 1:2:4 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Form work to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beam;and similar work;vertical or to batter etc for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers,shelves including supports, overhangs, etc also splays between floors and beams, etc for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and as directed.

M&L Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railing, openings in concrete walls, floors and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20 cm wide for rough finished surfaces of concrete complete all as specified and as directed.

S&F MS TMT bars,10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto all as per item above but 6 mm to 8 mm dia TMT bars complete all as specified and as directed.

Material and labour rendering 15 mm thick on fair faces of brick or concrete surface walls, in cement mortar 1:6 rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified amd as directed.

M&L 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floor and finished rough to recive the floor tiles etc complete all as specified and as directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using(40mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

Supply and fixing 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors, including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge.

Supply and fixing tubes 'medium grade' galvanised, 15 mm bore, ISI marked with all fitting such as bends, tees,elbows, unions,short pieces, connectors, back nuts etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Rotational moulded polyethylene water storage tanks of 1000 litres capacity,(cylindrical vertical with closed top) triple layered, white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connections complete all as specified

S&F in repair WC Orissa pattern white with integral foot rest 580x 440 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera, Cat Part No-S3010102 (CALINA) or equivalent in Jaquar/ Hindware.

S&F PVC connection 15 mm x 450 mm including PTMT check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Jainko, Essco, Parko, Prayag

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified. Make :- Jainko,Essco,Parko, Prayag

S&F Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make :- Jainko,Essco,Parko, Prayag

S&F stainless steel Soap dish with PU foam complete all as specified. Make :- Jainko,Essco,Parko, Prayag

S&F Cromium plated, towel ring square, complete all as specified. Make :- Jainko, Essco, Parko, Prayag

S&F Urinal (CAPRIANA in white colour) half stall with complete accessories Set, CP Waste Coupling, PVC waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/ Hindware.

S&F stop cock, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and as directed. Make :- Jainko, Essco, Parko, Prayag

S&F Overhead Shower 80 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange complete. Make :- Essco, Cat No- ALE- 536A or equivalent in Jaquar/ Cera/ Hindware.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting n.exc 10cm girth in brick walls.

S&F in repairs PVC (SWR) pipes, 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge. Make -Astral, Supreme, Finolex

S&F in repairs PVC (SWR) pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches/fixed on walls complete all as specified and as directed by Engineer-In-Charge. Make -Astral, Supreme, Finolex

Supply and fixing, UPVC(SWR) , bends with access door, for 110 mm bore complete all as specified and as directed by Engineer-in-charge. Make -Astral, Supreme, Finolex

Supply and fixing, UPVC branch piece, single (single 'Y') with access door for 110 mm bore complete all as specified and directed. Make: Astral, Supreme, Finolex.

Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center ,complete all as specified and as directed by Engineer-in-charge.

Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30mm wide 2mm thick fixed to wall with nail at spacing of 1m center to center, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC (SWR) , bends with access door for 75 mm bore , complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC(SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC (SWR) , bends for 75 mm bore, complete all as specified and as directed by Engineer-in-charge.

Supply and fixing, UPVC(SWR), bends for 110 mm bore complete all as specified and as directed by Engineer-in-charge.

S&F UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

S&F UPVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to disturbed surface of walls, complete all as specified and as directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge.

Material & labour for pressed steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 including applying two coats of existing surface finishes of the building complete all as specified and as directed.

M/L for cement concrete 1:3:6 Type C-2 using 40mm graded crushed stone aggregate to the bed of drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore complete as all specified and directed by Engineer-in-Charge.

Material and labour UPVC SWR Type - 'B' grade drain pipes of 150mm internal dia, laid in trenches on concrete bed and jointed as in repairs complete all as specified ( excavation, earth work and concrete bed shall be measured and paid separately.

M/L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in benching, water troughs and the like including slightly rounded chamfered angle and throughting etc all as specified and directed by Engineer-in-Charge.

M&L Pre-cast PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole cover slab set in CM 1:4 complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1: 2: 4 type B-1 smooth finished, and reforming benching as required for 150mm pipe complete all as specified.

Rendering 15mm thck in CM 1:4 mixed with integral WPC on concrete surface in roofs incl applying cement slurry @ 3 Kg per Sqm finishing even and smooth without using extra cement ( WPC shall be measured seperately).

Applying roof treatment as below:-- (i) Applying 1st coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely . (ii) Applying 2nd course of a coat of blown type bitumen of grade 85/25 heated to a temperature of 180 degree centigrade and applying @ 1.2 kg/sqm completely. (iii) Applying 3rd course of Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame .

M&L for preparation of newly sufrace of APP membrane and applying two coats of alumunium paint @ 200 ml per sqm etc of complete all as specified and as directed

Material and labour for hard core of broken stone or boulder of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Material and labour for Precast factory made chequred designer tiles (Rectified interlocking tiles) 300x300 mm glazed top made in white cement and pigment base of thickness not less than 19 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set and jointed in neat cement slurry(colour and pattern as per sample kept in GE office as approved by GE) including 15 mm thick screed bed in CM 1:4.all as specified and directed by Engr-in-Charge.

Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down of unsv MCB DB SPN /TPN along with MCB's

Taking down of unsv Sub main wiring of any size

M & L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete

(b) One 3 pin socket outlet 6 amp independent

(c) One 3 pin socket outlet 6 amp same board

(d) One Light point controlled by one, Two way switch 6 Amp complete

(e) One bell/ buzzer point controlled by one, complete all as specified and directed.

All as per srl item No 4 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.

Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed.

Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.

Supply and fix modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.

Supply and fix ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.

Supply and fix modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts.

Supply and fix musical door bell, AC 230 Volts single phase.

Supply and fix LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.

Supply and fix of lamp holder,PVC /Polycarbonate type with back plate for batten fitting .

Supply and fix LED lamp suitable for B22 holder of capacity 10 Watt.

Supply and fix energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed.

Supply and fix Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated, earth Bar, neutral bar door earthing.

Supply and fix MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.

Supply and fix MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed

Supply and fix sub main wiring with single core cable 2x 6 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fix of exhaust fan, steel body AC single phase. 230 V of size 300 m sweep with, blades, and frame and louvers and including making of holes in wall, floor etc all as directed by Engr in charge.

Taking down and refixing of Ceiling fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer, all as specified and directed by Engr-in-charge.

Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser by thoroughly cleaning the tank, thermostat, heatingelement and LED Lamp indicator, testing in all respect for smooth running and refixing complete all as directed.

Supply and fix Vertical Distribution Board (VTP&N) 4 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. Note:- (i) MCCBs FP & SP shall be measured paid separately (ii) MCB & DB shall have the same make.

Supply and fix 4 Pole MCCB 100 Amp, 415 Volts with rupturing capacity 16 KA , complete all as specified and directed

M & L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Supply, laying for replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, armoured cable 50 sq mm 3.5 core cable confirming to IS-7098 Part-I (1988) with latest ammendments.

Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments.

Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.

Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.

Material and labour for GI pipe light grade for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.

THAKUR BUILDERS AND CO

NARESH KUMAR AND COMPANY

M/S MOHAN LAL GUPTA

M/S Shesh Paul Gupta

CELMAC REGD

AKSHAY CONSTRUCTION COMPANY

M/S PARAMJEET SINGH