RENOVATION WORKS IN FRONT OF GM-O OFFICE CAR PARKING PORTICO AND SURROUNDING AREA ALONG WITH ASSOCIATED CIVIL WORKS IN OVERHAUL DIVISION HALBC

HINDUSTAN AERONAUTICS LIMITED BANGALORE OVERHAUL DIVISION

NAME OF THE WORK: RENOVATION WORKS INFRONT OF GM(O) OFFICE CAR PARKING,PORTICO AND SURROUNDING AREA ALONG WITH ASSOCIATED CIVIL WORKS IN OVERHAUL DIVISION,HAL(BC) CONTRACT NO. HAL/OVL/C-090/24-25

Name of the Tenderer:

Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

A DISMANTLING AND DEMOLITION

1 Dismantling tile work in floors and roofs(for thicknes of tiles 10mm to 25mm) laid in cement mortar including stacking material within 50 metres lead. 50.00 Sqm 67.43 #NAME? 3371.73

2 Demolishing cement concrete of nominal 1:3:6 or richer mix manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge 8.00 cum 2236.42 #NAME? 17891.32

3 Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50meters lead 70.00 Sqm 50.21 #NAME? 3514.60

4 Demolishing brick work built in cement mortar ,manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge 10.00 Sqm 1892.77 #NAME? 18927.65

5 Dismantling of precast concrete or stone slabs in walls,floor and partition walls etc inlcuding stacking within 50 meters lead .Thickness above 40mm up to 75mm. 10.00 Sqm 398.31 #NAME? 3983.15

B EARTH WORK EXCAVATION

6 Earthwork in excavation by mechnical means(hydralic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m width as well as 10 sqm on plan )inlcuding dressing of sides and ramming of bottoms,for lift including getting out excavated soil and disposal of of surplus earth lead up to 50m and for all lift as directed by EIC.2.8.1- All kin dof soil 5.00 Sqm 239.15 #NAME? 1195.73

7 Filling available earth (excluding rock) in trenches ,plinth ,sides of foundation etc in layers not exceeding 20cm ,consolidated each deposited layer by ramming and watering lead up to 50 and foll all lift . 2.00 cum 180.07 #NAME? 360.14

8 Carriage of material(Earth ) by mechnical transport inlcuding loading,unloading and stacking - up to 2km as directed by EIC .(location shall be shown by EIC during the execution.) 40.00 cum 225.84 #NAME? 9033.68

9 Half brick masonry in Cement mortar 1:3 (1 cement : 3 coarse sand) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 8.00 Sqm 1057.00 #NAME? 8455.98

10 Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes 1.00 cum 8584.92 #NAME? 8584.92

11 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall 150.00 Sqm 351.87 #NAME? 52780.97

E CARRIAGE AND DISPOSAL

12 Disposal of moorum/building rubbish/malba/similar unserviceable ,dismantled or waste material by mechanical transport including loading,transporting,unloading to approved municipal dumping ground for lead up to 10km for all lifts complete as per direction of engineering in charge .Note : Item to be applicable in urban areas having direction for restricted hours for movement/plying of laod carrying motor vehicke of 3.5 cum or more. 20.00 cum 453.94 #NAME? 9078.88

F CONCRETE (1:2:4)

13 Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level : 1.00 cum 4782.21 #NAME? 4782.21

14 Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 15.00 cum 8885.49 #NAME? 133282.29

15 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering .4.1.3A - (1:2:4) (1 cement:2 coarse sand ) including manufactured sand derived from Recycled concrete aggregates up to 25% :4 graded stone aggregates 20mm nominal size including Recycled concrete aggregates up to 25% 5.00 cum 7032.73 #NAME? 35163.66

16 Providing and Fixing hard drawn steel wire fabric of size or other suitable size wire mesh to be fixed and firmly anchored to the concrete surface by means of L shaped Mild steel shear key welded with existing reinforcement including the cost of materila,labour,tool & plants as approved by Engineering -in-charge 10.00 Sqm 829.20 #NAME? 8291.99

G STEEL REINFORCEMENT

17 Steel reinforcement(Thermo-Mechanically Treated bars of grade Fe-500D or more.)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. 1450.00 Kgs 99.08 #NAME? 143673.11

18 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minumum depath of 100mm up to 200mm in RCC beams,lintels,columns and slabs to introduce steel bars including fixing the steel bars in position using epoxy resin anchor grout of apporved make but excluding the cost of reinforcment all complte as per direction of Engineering in charge .26.30.1 up to inlcuding 12mm dia 75.00 one hole 129.72 #NAME? 9729.34

H STRUCTURAL STEEL WORKS

19 Steel work welded inbuilt up sections /framed work ,including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. 10.25.2 in gratings,frames,guard bar,ladder,railings,brckets,gates and similar works. 1500.00 kgs 158.57 #NAME? 237858.89

20 Centering and Shuttering including strutting ,propping etc and removal of form work for Foundation,footings,bases of columns etc for mass concrete 10.00 Sqm 359.36 #NAME? 3593.61

21 Walls(any thickness) including attached pilasters,butresses,plinth and string courses etc. 65.00 Sqm 774.03 #NAME? 50311.89

J PAINTING -EMULSION,EXTERIOR,ALUMINIUM

22 Removing white or colour wash by scrapping ,sand papering and preparing the surface smooth including necessary repairs to scratches etc complete 325.00 Sqm 18.14 #NAME? 5897.09

23 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 325.00 Sqm 67.94 #NAME? 22080.50

24 With ready mixed Red oxide zinc chromite primer of approved brand and manufacturer on steel galvanized iron/steel works 50.00 Sqm 61.92 #NAME? 3096.12

25 Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 25.00 Sqm 143.37 #NAME? 3584.19

26 Painting 2 or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade on old work 50.00 Sqm 94.45 #NAME? 4722.27

27 Finishing walls with Premium Acrylic Smooth exterior paint(Apex Ultima or equivalant )(Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface) with Silicone additives of required shade(brand :Apex Ultima or any equivalent ): Old work 200.00 Sqm 120.63 #NAME? 24125.82

28 Finishing walls with textured exterior paint of required shade .New work (Two or more coats applied @3.28ltrs/10sqm)over and inlcuding priming coat of exterior primer applied @2.20kgs/10sqm 25.00 Sqm 205.43 #NAME? 5135.69

29 Distempering one or more coats with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 110.00 Sqm 57.60 #NAME? 6336.47

K CAR PARKING TILE FLOORING :

30 Providing and laying matt finished vitrified heavy duty tile of size 300x300x9.8mm having water absorption less than 0.5% of approved make in all colours and shades in for outdoor floors such as footpath ,courtyard,parking ,multi modal location etc laid on 20mm thick base of cement mortar 1:4 in all shapes&patterns including grouting the joints with white cement mixed with matching pigments etc complte as per direction of Engineering -in-charge. 95.00 Sqm 1337.35 #NAME? 127048.02

L GRANITE FLOORING/CLADDING :

31 Providing and Laying Polished Granite Stone flooring in required design and patters in linear as well as curvilinear portions of the building all complte as per the architectural drawings with 18mm thick stone slab over 20mm (average ) thick base of cement mortar 1:4 (1cement :4 Coarse sand ) laid and jointed with cement slurry and ponting with white cement slurry admixed with pigment of matching shade including rubbing,curing and polisshing etc all complte as specified and as directed by engineering -in-charge.Plished Granite stone slab of colour Black,Cherry /Ruby red or equivalent. 30.00 Sqm 4117.10 #NAME? 123512.98

32 Granite of any colour and shade Stone tile(polished) work for wall lining over 12mm thick bed of cement mortar1:3 and cement [email protected]/sqm including pinting in white cement complete. 8mm thick 95.00 Sqm 2931.02 #NAME? 278446.95

33 Hacking of CC flooring/RCC wall including cleaning for surfcae etc complete as per direction of the Engineering In Charge 250.00 Sqm 3.17 #NAME? 792.40

34 Mirror polishing on marble/granite/stone work wherever required to give high gloss finish complete. 15.00 Sqm 465.52 #NAME? 6982.80

M RCC Precast concrete Drain Cover slabs

35 Providing and Placing in position 100mm thick actory made machine batched and machine mixed Precast RCC rectangular covers on drains of footpath of various sizes of M25 grade cement concrete for Rcc work inlcuding cost of centering,shuttering,reinforcement of 8mm dia TMT bars of Fe500 grade@maximum 100mmc/c on both ways,neat cement punning on finished surface properally encashed on all edges with 1.6mm thick,100mm wide MS sheet duly painted over priming coat ,reinforcment to be welded at edges with MS sheet and providing 2 Nos 12mm dia bar for hooks etc including cost of cartage,all kead & lift handling at site etc all complete as per direction of Engineering -in - charge. 60.00 Sqm 2831.48 #NAME? 169888.58

Total (Excluding GST) #NAME? 1545515.61

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 1545515.61 ABOVE % 1545515.61

Add 18% GST #NAME? 278192.81

Grand Total (Including GST) #NAME? 1823708.42

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Overhaul Division

Pre-Qulification Profile

Tender Ref No. or Contract No.: HAL/OVL/C-090/24-25

Name of Work: 'RENOVATION WORKS IN FRONT OF GM(O) OFFICE CAR PARKING,PORTICO AND SURROUNDING AREA ALONG WITH ASSOCIATED CIVIL WORKS IN OVERHAUL DIVISION, HAL(BC) ‘’

Estimated Amount in Rs.: Rs. 18,23,708/- including GST

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

4 Address for correspondence:

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code #N/A #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

9 Details of person holding the power of Attorney (If different from contact person)

Ph. No. with STD code

FAX No. with STD code

10 DECLARATION I

The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

11 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.