Providing CC Surface Road AD colony Community Hall main Road in ward no 7

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small sizeboulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10cum

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than15cm.thick well rammed watered and compacted etc.,complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement four fineaggregates and eight coarse aggregates) using 40mmsize ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential chargessuch as water providing etc., complete as perstandard specification

Supplying and erecting shuttering with necessary supports for plinth beam with all cross bracing etc., complete (R.C.C Column footing plinth beam and lintel side) using steel plate and angles, S.I. No.155-10M2

Plain Cement Concrete 1:2:4 (one cement,two fine aggregate sand Four coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plain Cement Concrete 1:1.5:3 (one cement,one and half fine aggregate sand three coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and Fixing Bitumen Ped For Expansion Joint In between Pavement slabs to 12mm thick and Fixed as shown in the Drawing including cost and conveyence of expansion joint including shalimar pad and joint sealent etccomplete as per standard specification

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 67:2010 & type XI standards of ASTM D 4956-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmX30cmX45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 67-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type XI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Single Arrow Big Size 36" X 18"

Add GST 18%