Replacement of damaged service cable with PVC conduit, providing and fixing PVC pipe junction box, tap off box,main switch 3phase PVC conduit accessories etc in B type block no 03 qtr no 17 to 24 under SDOCM Project.

Amount

Providing and fixing 50mm dia x3.2metres G.I Pipe (including accessories) complete with 50mm x 50 mm x6mm angle iron bracket on wall and 75mm x90 mm shackle insulator with Straps for house service connection including Painting the angle and flat iron with primer and finish paint etc. as required.

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuse including drilling holes in cubicle panel making connection etc. 100 amps TP&N

Supplying and fixing following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required. 40mm

Supplying , installing , testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with power coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required.63amps TPN 6Way

Supplying and fixing 5amps to 32 amps rating 240 volts, ’C’ series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection testing and commissioning etc as required.

Supplying and fixing following way single pole and neutral, sheet steel MCB distribution boaed,240 volts on surface /recess ,complete with tinned copper bulbar, earth bar din bar, detachable gland plate, including earthling etc as required.(But without MCB/RCCB/isolator)

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 x 16sq mm + 2x 16sq mm earth wire.

Providing and fixing following capacity TP&N disconnect or fuse switch unit inside the existing cubicle panel board with ISI marked HRC fuse including drilling holes in cubicle panel making connection etc. 32amps TP&N

Providing and fixing 6SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring / cable as required.

Erection of G.I. wire no.8 SWG including binding etc. as required

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3x 2.5sq mm.

Supply of channel iron75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finish paint as required .

Erection of angle iron / channel iron cross arm on wood /RCC/ PCC steel tubular / rail pole. etc as required.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES

M/S SHIV PARBATI ENTERPRISES