Installation and Configuration of new Gateway and rectification of SCADA System installed at 132 KV S/S Bichpuri

Providing & Installation of New Gateway at 132 KV S/S Bichpuri Agra with following specification as follows (1) Multiple-Master Communication capability (2) Support INC 60870-5-101/103/104, DNP3serial/TCP MODBLIS RTU/ASCIITIVP, IEC62056-DIMS 1FC61850. SNMP.SNTP.MQTT (3) Data Point Support:- 5000 (4) Port Connectors: 4 Serial (RS232/485) and 2 Ethernet (5) Power Supply (AC-DC) 85-265VAC 50-601-12,100- 370VDC 6) Realiability: ILC61850-3 complitant hardware, DNV certified IEC61850 server, HOT- Standby redundancy (7) Time Syne based on NTP/SNTP/NEMA/Protoco specific Synchronization (IEC104/DNP3.0etc) Suitable for Existing ZIV Make SCADA System as Installed at 132 KV S/S Bichpuri work Included as Installation & all Software configuration and its testing if required as per site condition and all other associated work to complete the job satisfactory.

Following work to be carried out for Lucknow SLDC - Work Included:- (a)Complete checking of SAS gateway panel included architecture and settings. (b) Programming and Configuration of gateway with address & settings(provided by client) to link from Substation to data center Lucknow (c) Complete testing of SAS gateway and complete data communication link b/w Substation to data center Iucknow

Following work to be carried out for ALDC Modipuram Work Included:- (a) Complete checking of SAS gateway panel included architecture and settings. (b) Programming and Configuration of gateway with address & settings(provided by client) to link from Substation to data centre Modipuram (c) Complete testing of SAS gateway and complete data 'communication link b/w Substation to data centre Modipuram.

Inspection and rectification ZIV make Substation Automation System, installed at 132 KV S/S Bichpuri Agra

The following work are inlcuding of BCU,s relays configuration and its ICD files for healthy communications with SCADA, restoring the rectified backup files of SCADA, checking the data healthiness at local SCADA, Replacing the defective FO multimode patch cord, Checking & Rectifying the healthiness of LIU and it communication ports, Checking the healthiness of IF('61850-7 Ethernet switches. Replacing the defective CAT-5/LAN cables and checking its healthiness Re-installation of old backup to SCADA if required. Checking the healthiness of all protection relay's communication to SCADA. Checking of all required events, alarm. numerical data's status and signals to SCADA from various bays & feeders Checking the SLD of S/S to SCADA screen checking the all required operations of equipment from SCADA if required. the following given material will be provided by contractor. Scada license key, activation key, old SAS backup, and software CD will be provided by department. Note After the completion of above work contractor has to submit the restored files and backup to the department representative via CD/Hard Drive.

Supply & fixing of Fibre optical Multimode patch cards for ST-ST, IC-LC, ST-LC port (As per requirement at site, having length of 05 mtr each.