REPAIRS TO TOILET SUNKEN PORTION ALONG WITH PLUMBING FITTINGS AT SOUTH CAMP BILLETS AT ATS BELAGAVI UNDER GE (AF) SAMBRA.

Amount

Demolition of cement concrete (unreinforced) of any description and in any position complete all as specified and directed

Dismantling wall, floor hearth tiling including cement mortar bedding (but not backing) complete all as specified and directed

M&L for preparation of floor and wall surfaces, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry complete all as specified and directed

M&L for applying first layer of cement slurry at 0.488 kg/ sqm mixed with Acrylic based polymer 'ARMOUR -CRETE' of structural water proofing Pvt Ltd by ratio 1:2 (one Armour Crete : Two cement) or 'POLYCRYL' of Green boro polychem Pvt Ltd by ratio 1:2 (one polycryl : Two cement) or Ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals Pvt Ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions complete all as specified and directed. Note:-This layer will be allowed to Air Cure for 4 hours and as directed

M&L for applying second layer of 1.5mm to 2.0mm thick slurry of cement at 0.242kg/sqm mixed with acrylic based polymer 'ARMOUR CRETE' of structural water proofing Pvt Ltd and silica sand by ratio 1:2:2 (Armour-crete : cement : silica sand) or 'POLYCRYL' of Green boro polychem Pvt Ltd and silica sand by ratio 1:2:2 (Polycryl : cement : silica sand) or ready to use PIDIFIN 2k of PIDILITE INDUSTRIES or SHALICRETE-500 of capital steel and chemicals Pvt Ltd and silica sand by ratio 1:2:2 (Shalicrete : Cement : Silica Sand) or NAFUFILL BB2 of MC Bauchemic India Pvt Ltd (ready to use) at 0.126 kg/sqm as per manufacturers instructions complete all as specified and directed. Note:- This layer will be allowed to Air Cure for 4 hours followed by water curing of 48 hours and as directed.

M&L for plain cement concrete 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in padding in sunken portion and floor complete all as specified and directed

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in lean concrete in floor and sunken portioncomplete all as specified and directed

M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including cement screed 15mm thick in CM(1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 mm thick backing with CM(1:4) complete all as specified and directed.

M&L for cutting holes of superficial area not exceeding 150 Sq cm into or through in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

M&L for pre cast cement concrete block masonry type C1, 1:3:6 (using 20mm graded crushed stone aggregates) solid blocks not exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified and directed.

S&F in repairs vitreous China wash down water closet (pedestal pattern), white with P trap (excluding fluhing cistern and flush pipe) including PVC seat cover complete all as specified and directed

S&F in repairs vitreous China squatting pan Orissa pattern of size 630 x 450 mm white with integral foot rest (excluding flushing cistern and flush pipe) including lime concrete bedding all round and finished just below level of rim of pan to receive the floor complete all as specified and directed

S & F in repairs vitreous China wash hand basin, white in colour, (counter type oval shaped) of size 560X470X190mm including cutting of Granite top and fixing complete all as specified and directed

S&F in repairs CP Waste coupling (half or full threaded) suitable for 32 mm dia bore discharge pipe of WHB with long screwed shank and fly nut complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Granite stone including grinding and polishing complete all as specified and as directed

S&F in repairs vitreous China urinal half stall type with grating and union for discharge pipe, fixing plug and waste pipe bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw, pointing around urinal back in cement mortar all as specified and directed

S&F in repairs CP Urinal spreader for fixing with 15mm dia pipe complete all as specified and as directed

S&F in repairs PVC valve less syphonic action type low level flushing cistern 10 Ltr capacity with inlet ball valve, handle, Bracket, PVC flush pipe of polythene of low or high density or PVC 32 mm dia complete all as specified and as directed

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

S&F in repairs health faucet ABS body mild steel cromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed

S&F in repairs 15mm dia bore bib taps, fancy type, cast copper alloy, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe complete all as specified and as directed

S&F in repairs two way bib cock with wall flange and aerator complete all as specified and as directed

S&F in repairs fancy type square shape of minimum size 125mmX125mm swivel shower of cast stainless steel, including CP finish shower rod (long) and cup washer/wall flange for fixing with 15mm bore dia pipe/fittings complete all as specified and as directed

S&F in repairs tubular Brass chromium plated Towel rail 20mm dia "D" type 60cm long between flanges complete all as specified and as directed.

S&F in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm dia angle valve fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed boths ends for iron pipe or for unions complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repair PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints, fixed to walls with suitable size mild steel clamps complete all as specified and as directed

S&F in repair PVC SWR pipe 110 mm bore, single socketed in any length with rubber ring joints, fixed to walls with suitable size mild steel clamps complete all as specified and as directed

S&F in repairs 75 mm dia bore PVC (SWR) bend of any radius complete all as specified and as directed

S&F in repairs 110 mm dia bore PVC (SWR) bend of any radius complete all as specified and as directed

S&F in repairs 75mm dia bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed

S&F in repairs 110 mm dia bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed

S&F in repairs 75mm dia PVC vent cowl complete all as specified and as directed

S&F in repairs 75mm dia bore PVC (SWR) bend with oval access door of any radius complete all as specified and as directed

Taking up or down 15 mm bore PPR/GI tubing and connections along with fittings such as tees , bends etc fixed to walls and ceilings or laid in floors/ trenches complete all as specified and as directed

S&F in repairs 15mm bore CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including fitting such as bends,elbows, tees, etc., complete all as specified and as directed

S&F in repairs Unplasticised PVC pipes 25mm dia of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including all fitting such as bends,elbows, tees, tank connector and fixing to existing pipe complete all as specified and as directed

S&F in repairs PVC pipe 50 mm bore of pressure rating 6kg/sq cm fixed to walls, ceiling or in floors including all fittings and clamps and/or cutting concrete portion and making good as required complete all as specified and as directed

Taking down and refixing of shutters of any description (wooden, aluminium, mild steel) in same opening of any description exc 1 Sqm but not exceeding 2 sqm, including taking down, easing and adjustingand also refixing builders hardware as required including renewal of unserviceable screws complete all as specified and as directed

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F in repairs 100mm long butt hinges medium weight cold rolled to door frame with necessary screwing or bolting complete all as specified and as directed

S&F in repairs 100mm long aluminium anodised handle fabricated type complete all as specified and as directed

S&F in repairs 150mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

M&L for 250mm long Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and as directed

S&F in repairs plain galvanised mild steel sheeting 1mm thick for crumple joints and straight flashing fixed with screw to wall complete all as specified and as directed

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads at any height complete all as specified and as directed.

M&L for 4mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, ceiling etc including rakking out joints , hacking for key , scrubbing down with water at any height etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces, surface finished even and fair complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth without using extra cement complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid separately

M&L for 5mm thick plastering in cement mortar 1:3 on ceiling surfaces on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed

M&L for applying two coats of oil bound distemper over a coat of primer including 3mm thick white wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

Taking out veeds, small plants/trees over chajjas, roofs, walls at any position and at any situation in ground floor/roof or in 2nd floor roof, ACC roof parapets and making good with cement plaster and surface finish to match existing surface complete all as directed.

Complete removal of existing treatment and necessary preparation of surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance, exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed.

M&L for preparation of surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance, exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed.

RAJENDRA KRISHNA SARAF (BID ID -3469786)

M/S MAHADEV M PATIL (BID ID -3469685)

shree bhavani constructions (BID ID -3470220)

AARADHYA ENTERPRISES (BID ID -3470312)