SPECIAL REPAIR TO BLDG NO P-10 AND P-11 AT AF STATION BIHTA

Amount

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable 15 mm galvanised iron tubing as obtained from srl item No1 with necessary new fittings as required complete all as specified and as directed.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with necessary fittings as required and fixed to walls, ceiling or laid in floors etc complete all as specified and as directed.

Fixing only old serviceable 20 mm galvanised iron tubing as obtained from srl item No 2 with necessary new fittings as required complete all as specified and as directed.

S&F in repair 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated fancy type stop valves , cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated concealed type stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union complete all as specified and as directed.

S & F in repair of chromium plated 125 mm long shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.

S&F in repair of 15 mm bore chromium plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repair of soap Dish Stainless steel chromium plated decorative type approximate size 160mmx160mmx90mm complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed to wall complete all as specified and as directed.

S&F in repair Vitreous China squatting pan 'Orissa pattern' of size 580 mm X 440 mm, white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repair Vitreous China pedestal pattern wash down water closet, white (excluding flushing cistern and flush pipe) including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc complete with plastic water closet seat cover, white, closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair 10 litre capacity PVC low level cistern valveless syphonic action type and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle including bracket complete all as specified and as directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550mm x 400 mm including waste coupling, cast iron brackets, PVC waste pipe 32 mm bore including necessary connection complete all as specified and as directed.

S&F in repair 15mm bore pillar taps, fancy type, cast copper alloy chromium plated with capstan heads, decorative type screwed down, high pressure screwed for iron pipe and fixed complete all as specified and as directed.

M&L for 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I 2009 including 15 mm dia ball valve high pressure with polythne float and fly nut minimum weight 142 gram, tank nipple as required complete including dismantling of existing unserviceable water tanks and removing from site complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed.

Dismantling existing 100 mm internal dia cast iron soil vent pipe fixed to wall or laid in trenches with fitting and accessories complete all as specified and as directed.

S&F 100 mm dia sand cast iron soil waste and vent pipes in any length with or without ears laid in trenches or in floor with cement joints complete all as specified and as directed.

S&F 100 mm dia spun cast iron soil waste and vent pipes in any length with or without ears fixed to walls with cement joints complete all as specified and as directed.

S&F Stack clamps for 100mm bore pipe made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Dismantling existing 75 mm dia cast iron soil waste and vent pipes in any length with fittings laid in trenches or in floor with cement joints complete all as specified and as directed.

S&F 75 mm dia spun cast iron soil waste and vent pipes in any length with or without ears laid in trenches or in floor with cement joints complete all as specified and as directed.

S & F 75 mm dia spun cast iron soil waste and vent pipes in any length with or without ears fixed to wall with cement joints complete all as specified and as directed.

S&F Stack clamps for 75mm bore pipe made out of 50 mmx 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

M&L cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 100 mm bore cast iron bends of any radius diminshing pieces or tapers with oval access door (larger bore measured) complete all as specified and as directed.

S&F 75 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75 mm bore cast iron bends of any radius diminshing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 100mm bore cast iron cowls complete all as specified and as directed.

Taking down rain water pipes (any size or pattern) ,including all fittings complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipe single socketed in any length with adhesive joint fixed to wall with suitable clamps as required complete all as specified and as directed.

S&F 110 mm bore PVC SWR bends any radius complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and not exceeding 4 sqm each and removing from site complete all as specified and as directed.

Taking down of shutters of any description exceeding 1sqm but not exceeding 2 sqm each complete all as specified and as directed.

Taking down shutter of any description exceeding 1.00 sqm and not exceeding 2 sqm and refixing in the same opening after easing, resecuring and adjusting complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications complete all as specified and as directed.

S&F Factory made Solid PVC Moulded door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing colour and pattern as approved complete all as specified and as directed.

S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

M&L cement concrete 1:3:6 type C-0 using 12.5mm aggregate stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hard wood (hollock) glazed/wire gauged/skeleton shutter well kiln seasoned chemically pressure treated.The size of rails and style as specified in SSR Part-I 2009 section 8 Clause 8.24(a) prepared to receive wire gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads complete all as specified and as directed. Note :- Wire gauge/glass shall be measured and paid separately under respective item.

S&F 35mm thick 2nd class HW (Hollock) factory made plain, framed, panelled shutter (two panel) with lock rail , kiln seasoned and chemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial veneering on both faces complete all as specified and as directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window shutters, hung type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100 mm long (02 No), suitable handle (01 No) complete all as specified and as directed. Note: - Glass pane and wire mesh shall be measured and paid seperately under respective item.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) ventilator , fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, and cutting for fixing of exhaust fan anodised aluminium snap beading, screws etc complete all as specified and as directed. Note - Glass pane shall be measured and paid seperately under respective items.

S&F 3 mm thick sheet glass ordinary quality in square not exceeding 0.5 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F 3 mm thick figured glass, pin head type in square not exceeding 0.5 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290 Gde-E-165, complete all as specified and as directed.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repair 300 mm, mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and as directed.

S&F 100 mm size mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75 mm size stainless steel hinges fixed with stainless steel screw complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handle, fabricated type omplete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls or on concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick work or concrete surface as in wall, surface finished even and fair complete all as specified and as directed.

M&L 5mm thick rendering in cement mortar 1:3 on concrete surface as in ceiling, surface finished even and fair complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick work or concrete surface as in wall mixed with water proofing compound as per manufacturer's instruction, surface finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces or complete removed surface complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surfaces including preperation of surfaces complete all as specified and as directed.

M&L for applying three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of white wash including preparation of old surfaces of ceiling complete all as specified and as directed.

M&L for applying two coat of white wash including preparation of old decorated plastered surfaces of wall omplete all as specified and as directed.

M&L for applying three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 20cm girth complete all as specified and as directed.

M&L for 50 mm thick cement concrete1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panel and joints filled with mixture of bitumen and sand, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

M & L for chequered coloured cement concrete tiles of size 300mm x 300mm x 25mm thick, laid and jointed in grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

M&L applying two coats oil bound distemper of approved shade over a coat of alkali resistant primer over and including 1 mm thick wall care putty including preperation of newly plastered surfaces of wall or on complete removed surface of wall complete all as specified and as directed. .

M&L for applying two coats of synthetic enamel paint of approved shade over one coat of pink primer including preparation of wood or wood based material of any description over 10 cm width or girth not otherwise described complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint of approved shade including preperation of old painted wooden surfaces of any description over 10 cm in width or girth, not otherwise described complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of approved shade including preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of newly steel or iron work of any description, over 10 cm in width or girth not otherwise described complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as on floor, surface finished even and fair complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided including removal of unserviceable material outside of MOD land complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 type B-1 (Nominal mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves including necessary use and waste of form work complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms (including a hole of gas pipe) and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and as directed.

Demoliton of stone slabs and tiles of any description or thickness in floors, apron, platform etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for 6 to 7 mm thick Glazed ceramic coloured tiles in vertical surface of size 350mmx250mm or 450mmx 350 mm , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and inclduing 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for 7 to 8 mm thick coloured Non Skid ceramic tiles (square/ rectagular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, surface finished even and rough complete all as specified and as directed.

M&L for 7 to 8 mm thick coloured Non Skid ceramic tiles (square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, surface finished even and rough complete all as specified and as directed.

M&L for18 to 20 mm thick prepolished mirror finished machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 15 mm thick cement screed bed or bedding layer in cement mortar 1:4 including rubbing and polishing complete all as specified and as directed.

M&L for 16 to 18 mm thick prepolished mirror finished machine cut kota stone slab flooring as in riser of steps,skirting,dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

S&F 25mm thick Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F stainless steel plate rack (wall mounted) as in kitchen of size 30 inch x 36 inch x 8 inch of approved pattern (as per sample) complete all as specified and as directed. Make :- A-One or equivalent as approved .

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and finally cleaning the surface with wire brush to remove old treatment for laying PCC padding including removal of unserviceable material outside of MOD land complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided and removing debris outside of MOD land complete all as specified and as directed.

M&L for treatment of sunken portion including demolition of existing cement concrete, WC, Por S trap and removing the unserviceable material out side MOD land in following specification:- (a) Preparation of RCC surface of sunken slab ( floor) by brushing and cleaning throughly with water (b) Application of two coats of urethane based chemical treatment ( as per manufacturs instructions DR FIXIT/FOSROC/CICO/STP) (c) 15 mm thick rendering in cement mortar 1:4 over chemical coating, surface finished even and smooth without using extra cement Note:-Continuty with cementious water treatment beyond sunken portion in toilet shall be maintained as directed.

M&L for providing cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete, filling of sunken portion etc complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding, roof kerbs (rounded or chamfered on edge) complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar 1:4 over concrete surfaces mixed with water proofing compound as per manufacturer's instruction, surface finished even and fair complete all as specified and as directed. Note :- Water proofing compound shall be measured and paid seperately under repsective item.

M&L for appling bitumen primer @ 0.30 litre/sqm complete all as specified and as directed.

M&L for applyng evenly a tack coat of hot blown industrial bitumen 85/25 grade @1.2 kg per sqm including cleaning surface complete all as specified and as directed.

M&L applying APP based polymeric water proofing membrane minimum weighing 3kg/sqm and minimum 3.mm thick consisting of 90 to 100 micron thick central core of HMHDP film shall be laid with 100 mm side lap and end lap over hot bitumen on prepared surface under supervision of manufacturer’s technical representative complete all as specified and as directed.

S&F Heat Resistant Terrace Tiles of size 300x300mmx20 mm thick with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid over and including 20 mm thick cement sand mortar 1:4 and grouting the joints with mix of white cement and marble powder in ratio of 1:1 including rubbing and polishing of the surface upto 3 cuts complete including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit including making good disturbed surfaces of walls, floors etc to match with the existing complete all as specified and as directed.

M&L point wiring with single core FRLSH PVC sheathed multi stranded copper conductor of size 1.5 Sqmm drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia with GI saddles GI screws, rawl plugs (concealed conduit wiring in walls and casing capping on ceiling or roof ) including Tee, Junction boxes and provision of 3 mm thick plastic laminated sheet cover of suitable size ,mild steel terminal box made out of 1.6mm thick mild steel sheet with brass screws for mounting switchs, sockets,regulators etc including 1.5 Sqmm FRLSH PVC sheathed stranded copper conductor cable as continuous earth wire and connected to main earth dolly complete all as specified and directed for one light/Fan/exhaust fan point/ bell point controlled by one Switch

Description same as per item No116 above but for 3 pin 5 Amps socket outlet on independent board complete all as specified and as directed.

Description same as per item No116 above but for 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and as directed.

Description same as per item No 116 above but for one power point 3/5 pin 15 Amps socket out let independent board using 2.5 Sqmm multi stranded FRLSH PVC insulated copper conductor cable with 2.5 Sqmm multi stranded FRLSH PVC insulated copper conductor cable as earth wire complete all as specified and as directed.

S&F Switch piano ,flush type single pole, one way, 6 Amps, 230 V complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 Pin, 6 Amp, 230 V complete all as specified and as directed.

S&F Switch piano flush type single pole, one way 16 Amps, 230 V complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 Pin, 6 & 16 Amps, 230 V complete all as specified and as directed.

S&F ceiling rose surface bakelite 63.5mm x 20mm complete all as specified and directed. Make : Anchor / Cona / Havells as approved

S&F stepped type electronic fan regulator flush type,230V, socketed type complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)complete all as specified and as directed. Note :-Old unserviceable ceiling fans shall be deposited in MES store yard.

M&L for hanging ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan including applying one coat of synthetic enamel paint of approved shade including preperation of surfaces including filling cavities and taking down existing ceiling fan complete all as specified and as directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, frame and louvers including connection with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, 230V, 50 Hz, RPM 1200, copper winding of sweep 300m including connection with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F MCB ,SP, 6-32 Amps, 'C' series, 240 V complete including making connections complete all as specified and as directed.

S&F MCB ,double pole, 40-63 Amps, 'C' series, 240 V complete including making connections complete all as specified and as directed.

S&F sheet metal enclosure double door, single pole and neutral 4 way with 200 Amp rated bus bar, 240 V, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking out old unserviceable DB box complete all as specified and directed.

S&F sheet metal enclosure double door, single pole and neutral 8way with 200 Amp rated bus bar, 240 V, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking out old unserviceable DB box complete all as specified and directed.

S&F 63 Amp MCB, 415V, 10KA 'C curve,4 pole including necessary connection complete all as specified and as directed.

S&F sheet metal enclosure double door, triple pole and neutral 8 way with 200 Amp rated bus bar, 240 V, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing including taking out old unserviceable DB box complete all as specified and directed.

S&F submain wiring with two single core 4 sqmm FRLSH PVC insulated multistrand copper conductor cable drawn in and including concealed rigid non metallic PVC conduit dia not less than 20 mm , medium grade ISI marked with all fittings and fixing accessories and one single core 4 Sqmm FRLSH PVC insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed. Note:- Two run of 4 sq mm copper cable,one run of PVC conduit and one run of 4 sq mm copper cable earth wire shall be measured as one unit.

S&F submain wiring with two single core 6 sqmm FRLSH PVC insulated multistrand copper conductor cable drawn in and including concealed rigid non metallic PVC conduit dia not less than 20 mm , medium grade ISI marked with all fittings and fixing accessories and one single core 6 Sqmm FRLSH PVC insulated multistrand copper conductor cable as continuous earth wire complete all as specified and as directed. Note:- Two run of 6 sq mm copper cable,one run of PVC conduit and one run of 6 sq mm copper cable earth wire shall be measured as one unit.

S&F LED street light fitting 35 Watt 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0 mm dia (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel ,filling adequate quantity of charcol dust and common salt all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber & cast iron earthing pit cover having size 250mmx250 mm, weight not less than 7.5 Kg as per relevant IS including frame, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , water funnel etc complete all as specified and testing on completion.

Supply, laying, jointing and testing XLPE cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 25 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed. Make:- Finolex/ Gloster/ Polycab

Excavation in trenches , not exceeding 1.5 m wide and not exceeding 1.5 m in depth for founddation etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Supply and Laying old size bricks of designation 75 for cable protection complete all as specified and as directed.

M&L for natural river sand as cushioning of cables including spreading and punning down complete all as specified and as directed. Note : Punned thickness shall be measured for payment purpose

M&L 50 mm bore galvanised iron pipe 'light grade' as in protection to cable laid in trench or in floor or fixed to wall with necessary fittings complete all as specified and as directed..

M&L 25 mm bore galvanised iron pipe 'medium grade' laid in trench or in floor with necessary fittings including taking out existing pipe complete all as specified and as directed.

M&L 25 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed..

RKT ENGINEER & SONS (BID ID -3196068)

M/S Rohit Enterprises (BID ID -3202285)

G S CONSTRUCTION (BID ID -3197739)

TRIBENI SINGH AND SONS (BID ID -3195430)

BEE ROMEN (BID ID -3197592)