REPAIR/MAINTENANCE TO LEAKAGE/SEEPAGE IN ZONE-10, 11 AND 17 AT MIL STN TALBEHAT

Amount

Dismantling AC sheet corrugated or semi corrugated tin roof covering including ridge ccomplete all as specified and directed by Engineer-in-charge

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete complete all as specified and directed by Engineer-in-charge

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof ,wall etc fixed with L-type or J=type or cranked hook bolts complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with L-type or J-type or cranked hook bolt complete all as specified and directed by Engineer-in-Charge.

M&L for providing plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as kerb or benching to wall complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10mm thick on fair faces of brick work or concrete work finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge

M&L for preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for plastering 15mm thick in CM 1:6 on fair face of wall, finished woven and smooth without using extra cement complete all as specified and directed complete.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated sheet steel 0.50mm thick on an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self-tapping screws complete all as specified and directed by Engineer-in-charge.

All as per item No.09 above but plain pre-painted Galvalume aluminium zinc coating GI based sheet as in ridge complete all as specified and directed by Engineer-in-charge.

M&L for hand rails, half round or other stock section or core for wooden hand rails, straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps, including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts or struts including cutting tops to shape as required, purling and rafter complete including applying one shop coat of zinc chromate primer complete all as specified and directed by Engineer-in-charge conforming to Fe-290 Grade E-165

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in un framed work complete all as specified and directed by Engineer-in-charge.

M&L for clean sawn 2nd class hard wood as in scantling more than 40 sqcm in sectional area including applying one coat of creosote oil painting fixed to timber/iron frame work compete all as specified and directed by Engineer-in-Charge.

Dismantling AC building board of ceiling of any thickness including cover fillets complete all as specified and directed by Engineer-in-charge.

S&F of E-board "Everest" make 600x600x4mm thick white prelaminated self-embossed reinforced designer ceiling board tiles of approved texture at all height aid on hot dipped galvanised iron imposed grid with 24mm wide, T-section exposed flanges which shall be powder coated white. The framed work shall comprise of main runner made from 0.33mm thick GI sheet of size 24x32x3000mm and spaced at 1200mm centre to centre screwed fixed to the soffit of structure by hanger as approved at 1200mm maximum centres. Hangers of GI wire 2 run of 2mm dia to be fixed by approved rawl plug, level and jousters and screws etc. The last hanger at the end of each main runner shall be greater than 450mm from adjacent wall flush fitting of 1200mm long cross Tee (with double stitching) to be interlocked between main runners at 600mm centre to centre to form 1200x600mm modules, Tee longer than 600mm to be supported independently 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between 1200mm cross Tee. The perimeter wall angle shall be of 0.45mm thick GI sheet of size 19x19mm and 3000mm long of white powder coated. All as specified by manufactures instructions finishing the surface by applying two coat of oil bound distemper as required and directed by Engineer-in-Charge.

M&L for preparation of old plastered decorated surfaces of wall and applying one coat of interior emulsion paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper over a coat of primer with 3mm thick wall care putty complete all as specified and directed by Engineer-in-charge.

S&F in repairs bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamelled paint complete all as specified and directed by Engineer-in-charge.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staple, complete all as specified and directed by Engineer-in-charge.

S&F in repairs sheet glass ordinary quality plain ,3mm thick and glazing with oil putty in squares Not exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-charge.

HARNAM SINGH ANIL SINGH

M/S R.S.BUNDELA & SONS

M/s Indu Enterprises