PROVN OF MD ACCN 36 DUs (12 OFFRS AND 24 ORS) AT PACHMARHI

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II (Internal Water supply) Lump sum price worked out by the contractor for Internal Water supply) as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III (Internal Electric Supply) Lump sum price worked out by the contractor for 'Internal Electric Supply' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for 'External Water supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (External Electrific Supply) Lump sum price worked out by the contractor for'External Electrific Supply' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Road, Path and Hard standing) Lump sum price worked out by the contractor for 'Road Path and Hard standing' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Compound Wall / Gate/Fencing) Lump sum price worked out by the contractor for 'Compound Wall / Gate/Fencing' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-X (Arboriculture) Lump sum price worked out by the contractor for 'Arboriculture' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Note for Srl No 2 to 12 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 12 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XII (Miscellaneous items of works)

Item No 01 : Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Item No 02 : Supply and fix polycarbonate reflective convex mirror of size 1000mm dia made of ABS/ fiber/ plastic body with upper collar complete with mounting hardware i.e. necessary clamps & nut bolts etc mounted on and including 50 mm dia MS pipe having 3.0M length duly painted with and including two coats of synthetic enamel paint as approved by GE over a coat of red oxide primer and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed.

External Water Supply

Item No 03 : M&L for cutting the existing water supply line of 100mm dia CI/DI pipe inlcuding necessary excavation/Earth work, threading etc and supply & inserting CI/DI fitting such as Tee Reducers (100 x 100 x80 mm) collars etc for 100 mm dia GI pipe including GI flange connection with suitable size of GI bolts, nuts & washers, CI/DI fittings etc complete all as specified and directed at site by Engr-in-Charge. (Note-CI/DI fittings of suitable size shall be measured in Kgs and paid separately under respectively item of Sch 'A' Pt-IV

External Electrical Supply

Item No 04 : Supply, install, test and commission step down transformer, outdoor type, platform mounted HT 11KV, 3 phase 433 V, 4 wire, 50 Hz delta/ star connected, vector group DYN -11 double copper wound, ONAN, manual type off load tap changing facility on HT side to vary secondary voltage from minus 7.5% to plus 7.5% in steps of 2.5%, continuous rating of capacity 100 KVA incl bushing on HT and cable box on LT side. The Transformer shall be complete with all standard fittings and accessories as per and confirming to IS 2026 such as bushing, guages, suitable size breather, conservator, oil level indicator, temp guage etc complete all as per IS 2026 and initial oil filling with insulating oil having die electric strength not less than 50 KV at 2.5mm gap, duly mounted on standard wheel including making incoming, outgoing connections etc complete all as specified and directed. (Note for OR's Qtrs) (Note:- Cost of PCC platform as per manufacturers drawings, shall deemed to be included in the unit rate qouted against the item.)

Item No 05 : Supply, fabricating, erecting LT Panel board out door type CPRI approved,as per IS 8623 double door totally enclosed weather and vermin proof suitably ventilated 415 Volts, 50 cycles, AC supply, factory made fully compartmentalized made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non-load bearing protection of enclosure IP 54 as per IS-2147 of 1962 with pretreatment and powder coated of approved colour including suitable size angle iron/flat iron frame work / support, required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with & including following : (Maj Qtrs Pandav cave)

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 120 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-03 Nos (b) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 1 No (for Street light feeder)

Item No 06 : Supply, fabricating, erecting LT Panel board out door type CPRI approved,as per IS 8623 double door totally enclosed weather and vermin proof suitably ventilated 415 Volts, 50 cycles, AC supply, factory made fully compartmentalized made out of 3.00 mm thick CRCA sheet steel for load bearing and 2.00 mm thick for non-load bearing protection of enclosure IP 54 as per IS-2147 of 1962 with pretreatment and powder coated of approved colour including suitable size angle iron/flat iron frame work / support, required civil works, excavation & earth work, PCC foundation etc, installation, testing & commissioning with & including following : (Hav Qtrs santoriy)

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-06 Nos (b) MCB, Tripple pole & neutral, 16 Amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 1 No (for Street light feeder)

Item No 07 : Supply, installation, commissioning and testing outdoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with PVC tape/ sleeves with maintainedvthe colour code and copper strip/wire busbar of suitable size ot MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.50 mm thick mild steel CRCA sheet with suitable size angle in supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external internal surface suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming complete all as directed by Engineer-in-Charge.(For Officers Accn)

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-04 Nos. (b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 01 Nos (Stair case lighting) (c) Three phase 4 wire, AC Static Direct connected smart prepaid energy meter, conforming to BIS-16444, current range 10-60 Amps, accuracy class 1.0 UC-1 category of approved makes-04 Nos

Item No 08 : Supply, installation, commissioning and testing outdoor wall mounting LT Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four nos Three phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with PVC tape/ sleeves with maintainedvthe colour code and copper strip/wire busbar of suitable size ot MCCB input and MCCB /MCB output of suitable length for connection of cable from main busbar, made out of 2.50 mm thick mild steel CRCA sheet with suitable size angle in supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external internal surface suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 Sqmm copper wire and connections of all outgoing / incomming existing cable of any size and removing existing unsv one complete all as specified and directed by Engineer-in-Charge.(For Hav Qtrs santoria )

OUTGOING (a) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity, rating 32 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-04 Nos. (b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 01 Nos (Stair case lighting) (c) Single phase 2 wire, AC Static Direct connected smart prepaid energy meter, conforming to BIS-16444, current range 10-60 Amps, accuracy class 1.0 UC-1 category of approved makes-04 Nos

Item No 09 : Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Item No 10 : M&L for steel tubular swaged pole 8.5 m long type 410 SP-22 with cast iron or welded MS base plate including nuts / bolts / washers etc conforming to IS-2713 (Part I to III) of 1980 and including junction box with metric knockout size 200x160x98mm, comprising of following:-

(a) Excavation in post holes in any type of soil not exceeding 0.5 cum each, getting out, returning filling in and ramming earth in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface complete.

(b) PCC (1:4:8) type D2 using 40 mm graded stone aggregate in base (0.60 m dia x 0.15 m height).

(c) PCC (1:3:6) type C2 using 40 mm graded stone aggregate in foundation filling (0.60 m dia x 1.5 m height).

(d) PCC (1:2:4) type C2 using 40 mm graded stone aggregate in coping (0.60 m dia x 0.45 m height).

Item No 11 : S&F street light junction box with thermoplastic, IP 65 cable junction box with metric knockouts on all sides for cable entry size: 200 x 160 x 98 mm as per Hensel cat ref no. K 9250 or equivalent in Eaton or Rittal or Secure duly fitted with followings:-

One number DIN Rail (35 mm). Four numbers ELMEX or equivalent make connector of 10 sqmm. One number ELMEX or equivalent make end plate.

Two numbers ELMEX or equivalent make end clamps. One number MCB SP 6 amp, 10 KA, 'C' series of Legrand make (cat ref no 408587) or equivalent in Hager or Schneider as approved.

Item No 12 : Supply and Fixing of LED street light 60watt made up of pressure die cast aluminium housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and resistance of IK07 having clamp for mounting on pole /wall working on 240V AC 50Hz, consisting of reflective lens, wired with appropriate driver, PF > 0.98, having over voltage protection upto 400Volts, including fixing on steel tubular or PCC pole with 2 Nos MS clamps made of 40x6mm and bracket made of 40mm dia light grade GI Pipe , not less than 1.2 m long including connection with 02 single Core PVC insulated Copper conductor cable 1100V grade of size 1.5sqmm complete with all as specified and directed.

Item No 14 : M & L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised iron earth strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length , 40mm GI pipe heavy grade for protection of GI Strip and 20mm GI pipe heavy grade for watering with wire mesh and funnel including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified and directed by Engineer-in-Charge

Arboriculture

Item No 15 : TREES, Palam, Topiary, & Bamboos (a) Trees:- The rate of the following items include for supply of plants as secified, transportastion to site excavation of pits as follows 0.9*0.9*0.9mfor trees Filling pits with prepared manure soil (ratio 1sludge plus 2good arth by bol.) supply transportation and mixisng of soil improvement nutrients as required and inside coat of addring in all pits flooding with water dressing including rimovl of rubbish & surplus earth if any with all leads & lits, plating and stacking inklful and final location including all locations specified. Maintenance off plants for a period of 12 months, replacement of any dead & sickly plants in this period, supply & spraying of insecticides as required

Ficus Reginauld

Ficus Blackeana 9-10 Ft Ht

Grevillea Robusta 9-10 Ft Ht

Plumeria Alba 9-10 Ft Ht

Delonix Regia

(b) Palam:-

Phoenic reobelenii 3-4 Ft Stem Ht

Cycus Reboluta

Wodetia Bifurcata

(c) Topiary

Melaleuca Spp

Bambusa vulgaris

Item No 16 : Shrubs, Ground covers The rate of the following item, include for supply of plants as specified, transportation to site, excavation of pits as follows: 0.6*0.6*0.9m for large shrubs and climbers Filling pits with Prepared manure soil ( ratio 1:2 i.e.1 sludge :2 good earth by volume)

Item No 17 : Supply, transportatiin and mixing of soil improvement netrients as required, inside coat of Aldrin in all pits, flooding with water dressing including removal of rubbish & surplus earth if any with all lead & lifts, planting and stacking in full and final location including all locations specified and maintenance of plants for a period of 12 months, replacement of any dead & sickly plants in this period, supply & spraying of insecticides as required.,

(a) SHRUBS

Caesalpinia pulcherrima- Rosea 21/2Ft, 1 Ft

Excoecaria tyricolor 3 Ft

Hamelia patens 2 Ft

Tabernaemontana coronaria (varegated) 2 Ft

Cassia Biflora 21/2Ft, 1 Ft

(b). G COVER Wedelia trilobata Carpet effect

Chlorophytum Carpet effect

Clerodendrum inerme Carpet effect

Duranta golden Carpet effect

Eranthemum nigrum Carpet effect

5. Lawn (Grassing) Dibbing

Sewage Disposal

Item No 18 : Supply, laying and testing of 150 mm inner diameter of double wall corrugated (DWC) high density polethelene pipes(HDPE) and stiffness class-8 (SN-8) with ISI marked (with CML No) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098(Part-2):2013 and as per manufacturer's instruction complete all as specified and as directed. Note:- Bedding of pipe shall not be provided in normal condition and construction methods shall be strictly compiled as per clause no A-4 Annex 'A' of IS 16098(Part-2):2013

Item No 19 : S&F factory made SFRC MH cover with frame confirming to IS 12592:2002 HD 20 grade, of size 750mm circular or rectangular sorrounded with steel strip 70 x 1.5 mm reinforced shall be as per relevant IS and laid over man hole brick work or concrete in CM 1:4, including reinforcement, complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole. Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. (iii) Reinforcement shall not be measured and paid seperately

Item No 20 : RCC Septic tank designed to carry sewage and sludge water, excavation in hard dense soil, PCC 1:4:8 below the foundation, RCC M-30 design mix in walls, base slabs, baffle walls and roof slab including beams etc ewith Vent shaft, Manhole openings with cover connection etc, complete with Effective depth of 1.5m and over all depth of 3mtr for 150 users septic tank with upflow filters complete all as specified and directed.

Item No 21 : Soakage well excavation in hard dense soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25 interconnecting pipes of RCC complete filled with brick bats of size 1.2 m Dia x 1.5 m effective depth complete all as sped and directed.

Item No 22 : M& L for Steel gate 5.5 m wide as per TD drg No.CEJZ/TD/13 OF SHEET NO 1/2 AND 2/2 DT 5/5/2000 Complete all as spd and directed by engr-in-charge.

Internal Electrification

Item No 23 : S & F modular type TV Socket out let complete all as specified and as directed.

Item No 24 : S & F modular type LAN Socket RJ 45 with complete box complete all as specified and as directed.

Item No 25 : S & F modular type Telephone socket RJ 11/12 with complete box complete all as specified and as directed.

Item No 26: S & F modular Metal flush box 8 module complete all as specified and as directed.

Item No 27 : S & F modular Metal flush box 12 module complete all as specified and as directed.

Item No 28 : S & F modular white cover plate with frame 12 module complete all as specified and as directed.

Item No 29 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting,luminous efficacy not less than 120 lumen/watt 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

Item No 30: S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts , luminous efficacy not less than 110 lumen/wattwith pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

Item No 31 : S & F occupancy sensor suspended type to detect the presence of a person for include automatic adjustment of lights systems in response to the quantity of peoople present for switch off/on the light in a circuit as per user reqmt (for use at parking area, verandah or any other space where power saving srequired).

Item No 32 : M & L for earthing complete with galvanized earth plate electrode 600mmx 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 3 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-1 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and 15 mm dia GI pipe for protection of GI wire up to 7.5 mtr connected to earthing point complete all as specified and as directed.

Item No 33 : Supply and Fix LED Solar all in one system integrated type of capacity 25W, lumen efficacy 150 lm/W, 60Wp, 30 AH, PIR inbuilt for motion detection, one night backup in full charge capacity system has lithium ferrous phosphate battery, mono crytalline panel with pole of height 6 mtr 40 dia made up of GI pipe heavy grade complete all as specified and directed.

Item No 33 A: S&F of LED Bulb E27 Cool day light 9 Watts 3 star Lamp having Luminous Efficacy range lies between (90 and 105) lm/W as per BEE guidelines Long life 15000 hours in built surge protection of 3 KV warranty of 1 year complete as specified and directed.

Item No 33 B: S&F Electric Kitchen Chimneys heat auto clean with motion sensor auto off function, touch sensor control LED lighting, metal housinng brushless DC motor, auto clean alarm, mood light, material temered glass, noise level not less than 70 Db of size 90 cm and suction power 1250 m3/hr with suitable size of flexible aluminium pipe for chimney exhaust (upto 20 feet 4/6 inch) including all fixing arrangements complete 6 way silent filterless, 12 yrs warranty on motor (2yrs comprehensive, autoclean alarm mood Lt complete all as directed

Item No 33 C: Supply, installation, commissiong and testing of electric water heater (geyser) of capacity 15 ltrs, vertical storage PVC outer body of 5 star rating, inner tank made of MS glass line coating with anti corrosion 1kW, pressure rating 0.8 Mpa, heating element of anodized rod with safety valve, thermostat, NRV, connecting pipes, necessary gate valves of suitable size etc including all fixing arrangements complete as specified and directed by Engineer-in-charge

Item No 33 D: Supply, installation, commissiong and testing of instant electric water heater (geyser) of capacity 5/6 ltrs (or nearest higher standard size), vertical ABS PVC outer body of 5 star rating, inner tank made of stainless steel 304 grade with anti corrosion 3kW, pressure rating 8 Bar, heating element of anodized rod with safety valve, thermostat, NRV, connecting pipes, necessary gate valves of suitable size etc including all fixing arrangements complete all as specified and directed by Engineer-in-charge

Item No 33 E: S&F Wall mounted Fan for Kitchen 400 mm, 3 blades button control, material aluminium powder coated finish with cord, blade of plastic material including all fixing arrangments complete all as specified and directed

Internal water supply

Item No 34 : S&F for CP Towel rail 600 mm long fixed with an incl chromium plated brass screws and wooden cleat (min wt 190 gms) complete all as specified and directed.

Item No 35 : S& F for CP Towel ring of dia 250 mm fixed with an incl chromium plated brass screws and wooden cleat (min wt 190 gms) complete all as specified and directed.

Item No 36 : Supply and fixing of stainless steel extension nipple 15 mm dia and 50 mm long alongwith SS cover plate complete all as specified.

Item No 37: S & F Brass Chromium Plated fancy type Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

Item No 38: S& F for Brass Chromium Plated fancy type jet sprey of leangth 1.25 m long fixed in posuition. Complete all as specified and directed

Item No 39: S&F Brass Chromium Plated fancy type WHB mixer central hole15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as spd and directed.

Item No 40: S&F Brass Chromium Plated fancy type sink mixer central hole15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as spd and directed.

Item No 41 : Almirah Med Steel :- Sheet MS sheet 1mm for shutter, shelf, sides, back and bottom shall be used fitting chromium plated handle with a three way locking device shall be provided as shown on drawing brass lock 6 leaver. Painting Powder coating - all steel components shall be pre treated 7 stages epoxy powder coating shall be done Rest : All as shown on the drawing & as directed by engineer - in - charge. FD-243

Item No 42 : Almirah Large Steel 1/2 Sh Sheet MS sheet 1 mm for shutter, shelf, sides, back and bottom shall be used. Fitting chromium plated handle with a three way locking device shall be provided as shown on drawing Brass lock 6 lever FD/E6/MAP/18

Item No 43 : Bath Mat shall be made of superior quality PVC as per drawing and as specified by engineer - in - charge. Colour : Red/Blue/Green FD/E6/MAP/07

Item No 44 : Bed Hard pipe 38 mm sq 1.2mm thick Square pipe for the main frame of head & foot board 19mm sq 1.2mm thick for inner frame for head & foot board 65 mm x 25mm x 1.2mm thick for long rails, 25m sq 1.2mm thick for stiffener under 12mm plywood shall be used Prelaminate PARTICLE BOARD : 16mm presninted PARTICLE BOARD board exterior grade shall be used in head and foot board with PVC taping 1mm thick all round the board Plywood 12mm BWP plywood shall be used for the top finish all steel surface shall be black 7 stages pre treated powder coating shall be done. Rest all as shown on drawing & as directed by Engineer - in - charge. FD-246

Item No 45 : Bin linen purpose with ironing board All as per drg and specified by Engineer - in - charge. FD-E-6/MAP/09

Item No 46 : Chair dining All as shown on drawing. Overall size shall be 440mm long. 430mm wide and 890mm high. All wood shall be of first class hard wood teak (MP). Front legs shall be 30mmx55mm in section thorughout up to 460mm high. Rear legs shall be 30mm x 55mm in section and 890mm high. The distance between outer side of legs in front shall be 440mm and the distance between outer side of legs in the rear shall be 30mm x 65mm section. Two side in short sides shall be provided of 20mm x 25mm in section, One stiffener of 20mm x 25 mm in section shall be provided in middle of short stiffeners, joining short stiffeners back horizonital rests, two in numbers of 45mm x 15mm made sightily curved in shape out o 45mm x 35mm in section wood shall be provided one at 18mm below the top of rear legs and other below 45mm from the bottom of top horizontal rail.

Caning shall be done without any joint in the cane. The cane shall be 2mm wide 0.4mm thick half round gola type of shah or premer brand and woven in Godrej pattern. The cane shall weigh not less than 6gms per ten running metre . All wood surfaces exposed to view when placed in poscon shall be french polished with high glass finish. Hard rubber/PVC shoes shall be screwed to the bottom of all legs. Rest all as shown on drawing & as directed by Engineer - in - charge. FD-279

Item No 47 : Chair Varandah Pipe. The frame of chair shall be of 20mm dia med steel conduit of 1.6 mm thickness. Canning shall be done with supenor quality half round 4 mm wide cane in mate pattern or as directed by Engineer-in-Charge. Shoes PVC/hard rubber toes shall be provided to the bottom of all legs. Finish. All steel work shall be painted with two coats of synthetic enamal paint over coat of red code primer. Rest all as shown on drawing & as directed by Engineer - in - charge. FD-259

Item No 48 : Carpet Woolen as per trade pattern of overall size 6.5 meter x 5.5 meter and shade colour and quality as approved by GE. Thickness shall be 7-9 mm and average weight is not less than 2 Kg per Sqm. (TP)

Item No 49 : Chair Writing FD-280

Item No 50 : Chair Computer FD/E6/MAP/01

Item No 51 : Charpoy folding IP with hard top FD-273 FD/MAP/-11/01

Item No 52 : Har Stand FD-361

Item No 53 : Ladder Aluminium FD-1025

Item No 54 : Table Peg FD/384/55/MR/277

Item No 55 : Plato rack steel 1830x760x1905 mm FD-129(M)

Item No 56 : Receptacle FD/E6/MAP/13

Item No 57 : Rack Shoo Steel FD/E6/MAP/02(R)

Item No 58 : Side Board FD-241/27

Item No 59 : Sofa Set (5 seater cushioned) FD/MAP-II/02

Item No 60 : Steel Dressing FD282/27MR

Item No 61 : Table bed side FD/E6/MAP/15(R)

Item No 62 : Table Centre FD-274/375/235

Item No 63 : Table dining (6 Pers) 273/376/30

Item No 64 : Table dressing gents with mirror FD/E6/MAP/16

Item No 65 : Table Dressing Ladies with Mirror FD/E6/MAP/16

Item No 66 : Table Computer FD/E6/MAP/03

Item No 67 : Teapoy Timber FD-278

Item No 68 : Teapoy Verandah FD-E6/MAP/17

Item No 69 : Trolley for TV FD-E6/MAP/04(R)

M/s R.L.PAREEK (BID ID -3162403)

M/s R.V. Constructions (BID ID -3150642)