REPLACING THE DAMAGED BARBED WIRE AND CHAIN-LINK FENCING INSIDE THE KAMARAJAR PORT PREMISES

Amount

Bill No - 1- Replacing the barbed wire fencing provided over to South Break Water of KPL

Drilling the holes about depth of 15cm of dia 16mm at center to center distance of 2m for making bonding between old and new structure including cost of all labour, transport, tools and plants etc., complete.

Providing and laying plain cement concrete (P.C.C). 1:2:4 (1 Cement: 2 Coarse river Sand / M Sand: 4 stone metal of 20 mm nominal size) for the foundation of RCC post as per drawings and technical specification and as directed at site etc. complete

Providing pre-cast RCC post / struts for a length of 4.2 m as per the drawing and /or as directed at site with mix 1:1.5:3 (1 Cement: 1.5 Coarse river sand: 3 20 mm Graded stone aggregate) as per the drawing and specification and /or as directed at site including cost of all labour , materials, curing, transport, tools and plants etc., complete.( including cost of shuttering and exculding the cost for steel )

Cost of Centering for beams including cost of all labour, materials transport, tools and plants etc., complete.

Supplying fabricating and fixing steel fabrication as reinforcement for casting fencing post including cost of all materials, transport, labour, tools & plantsetc complete.

Lifting , transporting, unloading and placing in position and alignment the pre-cast RCC post / struts as per the drawing and /or as directed at site including cost of all labour , materials, curing, transport, tools and plants etc., complete.

Providing and fixing PVC coated galvanized steel barbed wire of 2.50 mm dia, 2 ply with 4 points at a distance of 75 - 100 mm c/c as specified in the drawing and/ or as directed at site including placing the barbed wire in position including tying with the post as specified in the drawing and /or as directed at site including the cost of all materials , transportation , lead , lift, labour, tools, plant, equipment etc. complete.

Providing and Fixing G.I Chain link (G.I wire of dia 3mm, PVC coated to achieve outer dia. not less than 5mm) fabric fencing of required width in mesh size 50x50mm including placing the fencing wire in position including tying with the post as specified in the drawing and /or as directed at site including the cost of all materials , transportation , lead , lift, labour, tools, plant, equipment etc. complete.

Colour wash 2 coats over 1 coat of white wash with Lovelycem or equiv. to the existing RCC post including cost of all labour , materials, transport, tools and plants etc., complete.

Bill no-2- Replacing damaged chain link fencing provided in salt land area opposite to Iron ore stack yard of KPL

Dismantlaling and removing the damaged fencing and stacking at KPL scrap yard opposite to ETTPL about lead of 5KM including the cost of labours, tool & Plants, transportation etc required to complete as per the instruction of Engineer

Earth work excavation in ordinary soil, sand, clay mixed with roots, small boulders, debris, rubbish etc. as existing at site of work for column and plinth beam foundation dressing of sides, ramming of bottom, all as specified under relevant schedules, drawings including depositing the excavated materials within a lead of 50 m for re-transportation as directed including all labour, shoring, strutting and dewatering wherever necessary, transport, tools, tackles, equipment, fuel, etc., complete.

Providing and laying plain cement concrete of mix1:4:8 in volumetric proportions (1 cement: 4 coarse river sand / M sand as per IS 383: 8 graded hard granite stone aggregate of 40 mm nominal size) for levelling course in foundations all as per specification, drawings and as directed including mixing, transporting, placing, consolidating by ramming, curing, shuttering, dewatering if any., etc including all labour, material, equipments, tools, fuel etc. complete.

Providing and Placing in-situ cement concrete of mix 1:2:4 (1 cement : 2 coarse sand / M sand as per IS 383: 3 graded hard granite stone aggregate of 20 mm nominal size) for fencing pedestal wall as per relevant specifications, drawings and as directed including mixing, transporting, placing, vibrating, shuttering, curing including all labour, material, equipments, tools, plants, fuel, etc. complete.

Centering and shuttering including strutting, propping etc. and removal of form work including cost of all labour, materials transport, tools and plants etc., complete.

Providing and Fixing G.I Chain link (G.I wire of dia 3mm, PVC coated to achieve outer dia. not less than 5mm) fabric fencing of required width in mesh size 50x50mm including placing the fencing wire in position including tying with the post as specified in the drawing and /or as directed at site including the cost of all materials , transportation , lead , lift, labour, tools, plant, equipment etc. complete.

Supplying, fabricating and fixing in position M.S. Angles 75x75x6mm posts, MS plate 125x125x 6mm thk in the bottom of the angle post, MS flat 50x4mm as stiffeners in between the post at top, middle and bottom and MS flat 50x4mm at the face of the every angle post including providing necessary holes in the angle post and MS flat for fixing chain link fencing with 12 mm dia GI bolt and nut as indicated in the drawing and tack welding of the chain link fencing with MS flat stiffners at six locations per panel (2.1 m) and six holes of 6 mm dia at inclined portion of the of each angle post for providing SS stay wire for tying concertina wire all as per drawing, relevant specifications and as directed including necessary cutting, welding, shaping etc., including all materials, labour, transport, tools, equipment, scaffolding, etc., complete.

Supplying and fixing the Galvanized Iron Concertina Razor tape (wire 2.5 mm dia) fencing of 600mm diameter having 50 Nos. circles per 6m length over the inclined portion of the angle post as shown in the drawing with barb (thickness-0.50mm, 22mm length, and 15mm width at 34 mm c/c) in concertina razor tape, including providing and fixing six rows of Stainless steel stay wire 2.5mm dia throughout the length through the holes at the inclined portion of the M.S. angle post as shown in the drawing and tying concertina wire and stay wire and all points with 18 gauge S.S. binding wire all as per Manufacturers specifications and as directed at site of work including stretching, cutting, tying etc., including all labour, tools, tackles, scaffolding etc., complete.

Preparing the surfaces of MS angles and MS flats and painting with two coats of coal tar epoxy paint of approved quality over a coat of zinc chromate primer including all materials, labour, scaffolding, brushes, tools, etc., complete.

Preparing the exposed surfaces of the fencing wall and applying with two coats of colour wash over one coat of white wash using lovelycem or equivalent to give an even shade, including all labour, materials, brushes, tools, materials etc., complete.

E.Krishna