REPAIR REPLACEMENT OF ROAD FURNITURE ROAD MARKING PAINT AND MISC WORKS UNDER GE FARIDKOT MIL STN

Amount

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for providing 100mm thick plain cement concrete 1:4:8, type D-2, (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 25mm thick sand filling under floors, in foundation including watering and consolidation as required complete all as specified and directed.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar or any description or thicness in floor, sirtings etc omplete all as specified and directed.

M&L for machine pressed pre-cast concrete interlocking paver block with gray cement and no pigment (Colour Tiles)any shape & size conforming to IS 15658 - 2006 of 80 mm thickness, M40 Grade laying above sand cusioning surface etc complete all as specified and directed.

M&L for except machine pressed pre-cast concrete interlocking paver block with gray cement and pigment (Colour Tiles)any shape & size conforming to IS 15658 - 2006 of 80 mm thickness, M40 Grade laying above sand cusioning surface etc complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregates as in benching for manholes, bands, coping, bed plates including slightly rounded or chamfered angles including necessary formwork complete as in side of breakers etc incl necessary formwork all as specified and directed by Engineer in Charge.

M & L for factory made pre-cast cement concrete 1:2:4, type B1, using 20mm graded crushed stone aggregate as in kerb stone of approximate any size as directed by Engineer-in-Charge including necessary form work with plain fair faces, including chamfers, weatherings, throating etc set in cement mortar 1:4 with joints to match for path edging etc; embedded in position including all necessary excavation, tamping ground around blocks and removal of rebbish/ surplus soil etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation new concrete/bricks surface of any description over 10cm girth or width, not otherwise described and applying Two coat of synthetic enamel paint over acoat of primer complete all as specified and directed.

M&L for preparation old painted concrete/bricks surface of any description over 10cm girth or width, not otherwise described and applying Two coat of synthetic enamel paint complete all as specified and directed.

Supplying and fixing in repair MS round delineator 50 mm dia and 900 mm long having 2 no 100mm dia highly reflective reflector made of PMMA and mounted on MS pipe of 50 duly powder coated anti rust and anti theft steel net available in Red/White or Yellow and embedding the same in PCC (1:2:4), type B-1, using 20mm graded stone aggregate, complete all as specified & directed by Engineer-in- charge. Note : - Size of PCC block for embedding delineator shall be 15cmx15cmx30cm and cost of the same is deemed to be included in the unit rate of item.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

S&F in repair solar delinator with 6 LEDs of red / yellow colour house in plastic body with LEDs, solar cells, battery and light sensors well protected in poly carbonate sheet, device pretected with powder coated wire mesh cage, equiped with solar system mounted over 50 mm dia steel tube post powder coated coated length 1000mm also having sheet foot to firm grip in the ground. the delinator to have additional reflective bands , equiped with solar system workable for 2-3 days (night) after full charge of 8-10 hours including excavation in any strata and embedding in PCC 1:3:6, type C1, of size 30cmX30cmX20cm etc including aluminium alloy polycorbonateed powder coated MS pipe of size 50 mm dia and 1000mm hight complete all as specified and directed

Supplying and fixing in repair 800 mm dia convex mirror complete as per manufacturer instruction incl excavation, PCC etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for providing and fixing customized signage board in repair, hard sheet ACP 3MM, base reflective sheet (Green and white) - Engineering Grade, lettering-Vnyl of size etc, complete all as specified and directed by Engineer-in-Charge.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M & L for Excavation in post holes (or similar holes) each n exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M & L for cement concrete in foundation filling and mass concrete type B2, PCC 1:2:4 using 40 mm graded stone aggregate complete all as specified and directed.

NAV DURGA CONSTRUCTION CO (BID ID -3126824)

FAIR DEAL CONSTRUCTION CO (BID ID -3109580)