Furnishing of Electrification PH Interior Work of Conference Hall At ADH office Padampur District Bargarh

False ceilling made out of 12 mm thick P.O.P. Gypsum board ceilling fixed with frame made out of G.I.Perimetre channel runners (Gyp steel make or equivalent branded company) etc. and hanged from R.C.C. Roof slab on 600mm x 600mm grid including cost, conveyance and taxes of all materials with cost of labour and T&P required for the work complete as per direction of the Engineer-in-charge.

Providing, fitting and fixing of premoulded decorative corner beading of Model No C-443 of GYPSUM INDIA LTD. having cross section dimention 112x80 mm & fixing the same by providing PVC plug, screws, cornice adhessive, fevicol including cost, conveyance and taxes of all materials with cost of labour and T&P required for the work complete as per direction of the Engineer-in-charge.

Painting two coats with Plastic Emulsion paint over a coat of wall Primer & wall Putty of approved shade including sand papering, polishing the surface, including cost, conveyance, royalties and all taxes of all materials along with T & P required for the work including cost of paints etc. complete in all respect.

First Floor

Second Floor

Painting 2 coats with Weather coat of approved shade over a coat of wall primer by means of brush to outside surface of walls after cleaning the surface including cost of material with all taxes and cost of all labour with T&P required for the work etc. complete in all respect.

First Floor

Second Floor

Providing, Fiting & Fxing of wall panneling made out of PVC with decorative laminate one side including Horizontal and Vertical member by 10'-0" x 10" C/C jointing and finishing to a flush finish bonded with adhessive including all cost, carriage and all taxes of all materials with cost of labour, T&P & machineries etc. all complete as per specification & direction of the Enginer-in-charge.

Wall Panelling to Inside of the Hall

Supplying, fitting and fixing of ComputerTable (1.50m x 0.60m size) made up with 12mm thick BRW Ply table top & drawer & Cup board with ply wood,1.25mm thick sunmica pasted and all other materials required for the work including cost, conveyance, taxes of all materials, labour, T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of shelves Wooden Cup Board with Openable Ply wood Door of approved desigen & Drawing i.e 2.08 x 0.78 = 1.62m² made out of 19mm & 12mm thick BWR Plywood and 1.25 mm thick laminate pasted, including locking arrangement & all fittings including cost of materials, labour, T&P etc. complete as per direction of Engineer-in-charge of the work .

Supplying, fitting and fixing of Conference table 3.00m x 0.61m = 1.83Sqm size made up with19mm BWR Ply & 12mm thick BRW Ply table top & drawer & Cup board with ply wood,1.25mm thick laminate pasted and all other materials required for the work including cost, conveyance, taxes of all materials, labour, T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of Wooden PodiumTable (0.60m x 0.60m x 1.20 size) made up with 12mm thick BRW Ply table top & Cup board with ply wood,1.25mm thick laminate pasted and all other materials required for the work including cost, conveyance, taxes of all materials, labour, T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of MODULED Chair made up with Plastic make with all cost, conveyance, taxes of all materials, labour, T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Supplying, fitting and fixing of VIP Executive Chairs with Leather with all cost, conveyance, taxes of all materials, labour, T&P etc.complete in all respect as per direction of the Engineer-in-charge.

Internal Electrical Work

Recessed wiring to light point fan points, calling bell point with 1.5 sq mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 6 Amp modular Switch and Ceiling rose ISI Marked on Modular Box having front modular cover of suitable size modular box with 1.5 Sqmm FR PVC Insulatedsingle core multistandard copper wire as earth wire including all acessories and connection.

Group A

Group B

Group C

Recessed wiring to 6 amp Plug point with 1.5 sq.mm F.R PVC insulated single core multistandard copper wire of ISI Marked with 20mm dia PVC conduct including S/F of 6amp one way modular switch and 6 Amp 5 Pin plug socket of ISI marked mounted on modular box having front modular cover of suitable size modular box with 1.5 Sq. mm FR PVC insulated single wire as earth wire including all acessories and connections.

S/F of 5/6A Switch & 3 pin 5/6A Socket on existing board

S/F of 16A Switch & 3 pin 16A Socket on existing board

Writing to circuit/sub main writing along with earth wire with the following sizes of PVC S/C multistrand copper wire in recessed.

2 X 1.5 sq mm + 1 x 1.5 sq mm

2 X 2.5 sq mm + 1 x 1.5 sq mm

2 X 4 sq mm + 1 x 1.5 sq mm

2 X 6 sq mm + 1 x 2.5 sq mm

4X 6 sq mm + 2 x 2.5 sq mm

4 X 16 sq mm + 2 x 4 sq mm

S/F of BK angle holder with out bulb

S/F of 20 w LED flat fitting

S/F of 15 w Celing LED lamp Square type .

Supply, Installation, Testing and Commissioning of 48 inch ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer in charge.

S/F of electronic fan regulator step type (Modular)

Installation, testing and commissioning of exhaust fan 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, etc. complete as per the direction for the Engineer in charge.

S/F of 16" wall mounted fan

S/F of 3 pin 15/16 Amp plug with switch on MS board

S/F of Computer Board 3nos 5/6 Amp 6 Pin modular socket with 3nos of 5/6 Amp modular switch

S/F of 12 way Double Door DB Box with 32 Amp DP MCB- 1no, 10 amp S.P. MCB- 10 nos.

S/F of 8 way Double Door DB Box with 32 Amp DP MCB- 1no, 10 amp S.P. MCB- 6 nos.

Providing & Earthing with G.I/Copper earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with copper plate having locking arrangment and watering pipe etc with charcoal and salt as required complete. as per Govt specification

Supplying and fixing of NO8 HDBC wire for earth land.

Wiring to Inverter point with 1.5 Sq. mm PVC S/C multistandard copper wire.

S/F of P. Board of size 18"x30"x10" wall mounting made in 16 SWG CR Sheet with powder coating and with the following arrangements.

EXTIUNGUISHER SYSTEM (FIRE FITTING)

Supplying, Installation testing and commissioning of A B C Type fire Extiunguisher of 6Kg Capacity including cost of all materials & labour etc complete. (Make Safex/Fireshield/Ceasefire )

Internal PH Work

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.

20mm dia PVC ASTM pipe (sch-80)

25mm dia PVC ASTM pipe (sch-80)

32mm dia PVC ASTM pipe (sch-80)

Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

15mm dia CP angle stop cock

15mm dia CP two in one bib cock

15mm dia CP Long Body Bib cock

20mm dia CP consealed stop cock

15mm dia CP Pillar cock

25mm dia brass full way valve (Shakti make)

32 mm dia brass full way valve (Shakti make)

15mm dia CP Health faucet

15mm CP Extension piece

125mm CP grator

15mm size C.P. flange

supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.

Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.

110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)

110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)

110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)

110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Vent Cowl(Ori Plast/Finolex/Supreme Make)

110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)

110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend

Supplying all materials, labour, T&P and fixing glazed earthenware squatting pan indian type of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge

Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal.

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge

European water closet with 'p' trap plain(Hindware/Parryware/Neycer make)

One Pice Commod (Hindware) ELEMENT Cat No.92084

Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge

Half pedestal basin(560x450)Hindware No.91049+91115

Under Counter basin(560x450)Hindware-No.10095

Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

Towel ring

Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.

600mmx125mm plate glass shelf with CP/NP guard rails.

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.

600mmx450mm size B.E mirror

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge

CP Soap Holder

Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.

½” x 5” CP Shower

Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge

Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engin

Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge

Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge 20.23 x 0.10

Please Enable Macros to View BoQ information