SPECIAL REPAIR TO BLDG NO T-44 AND T-31 OF 9 ASSAM, PROVN OF PARKING SHED AND AREA DRAINAGE FOR OR MD ACCN AT CMP COLONY AND SPL REP TO CEILING FANS AGAINST BER UNDER GE (WEST) LUCKNOW

Amount

Demolition of cement concrete (unreinforced) in ground floor or pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

Dismantling framed truss not exc 10m clear span of any type complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed

Dismantling of wall and ceiling board (fibre, pulp,insulation etc ) any thickness including cover fillets complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified and directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing complete all as specified and directed.

Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material and Labour for brick work with fly ash bricks old size , straight or curved on plan, exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and Labour for rendering 15mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed..

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in, and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm including watering and removing surplus soil to a distance n. exc 50m and making good surface in soft/ loose soil complete all as specified and directed.

Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and Labour for preparing new plastered surface of walls and applying two coats of distemper oil emulsion over a coat of primer and over a coat of wall care putty 1mm thick complete all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of old or previously treated surface of wood or wood based materials of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and Labour for preparation of old or previously treated surface of steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Pressed steel door frame of size 125 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed.

M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a)supplied and fitted to chowkhats complete all as specified.

S&F false ceiling with 4mm thick 'E' Board (Make: Everest or other approved make) of size 600x600mm, white, prelaminated sheet embossed reinforced designer ceiling board tiles of approved texture and powder coated, hot dipped GI imposed grid frame work complete all as specified and directed including all necessary drilling, cutting to fix electrical items as under with the following:- (a) 24x24x0.45mm thick powder coated GI angle plugged @ 600mm c/c along perimeter of wall. (b) 24x32x0.33mm thick powder coated GI tee as main and cross runners suspended with 4mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab etc. placed @ 600mm c/c from perimeter of wall. (c) Fixing of 4mm thick 'E' board tiles and finished complete with one coat of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be executed as per manufacturer's instructions and as directed.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

S&F multi-rib TM profile, tensile strength 550 Mpa, colour coated 0.50mm thick pre-painted galvalume aluminium zinc coated GI based plain steel sheet, having maximum pitch of 250mm c/c and minimum 30mm crest depth in length as per site requirement, the feed material manufactured out of 0.50mm (TCT) with coating of 18-20 microns top coat over 5 microns primer and 8-10mm alkaline back of zinc aluminium alloy of AZ-150, including the sheet shall have a hot dip metallic zinc aluminium alloy coating of zinc 43.5%, aluminium 55% and silicon 1.5% with total mass coating of 150 gms/sqm on both sides having covered width 1020mm and return leg for proper side lap as in roof covering/ cladding and fixed with self tapping screws with EDPM seal complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L for hard core of broken stone/bolder of gauge n.exc 63mm deposited, spread and levelled in layers n. exc 15cm thick including filling ineterstices using fine material as approved watered and rammed to a true surface complete al as specified and directed.

M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring and finishing the surface even and smooth using extra cement complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing complete all as specified and directed.

M & L for PCC type C-0 (1:3:6) using 12.5mm graded stone aggregate as in filling of hollow portion of pressed steel frame etc complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in flooring etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 15 mm thick screed bed in cement morter (1:6) complete all as specified and directed.

Material and Labour for Coloured Non -Skid Ceramic tiles 7 to 8 mm thick, area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in skirting etc set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.

Material and Labour for coloured glazed ceramic tiles 450 x 350 x 7 to 8mm thick on vertical surfaces such as skirting/dado set and jointed in neat cement slurry & pointed in colour cement to match the surface over and including 10 mm thick rendering in cement morter (1:4) complete all as specified and directed.

M & L for Machine cut kota stone slab 20-25mm thick in floors over cement screed base 15mm thick in cement mortar 1:6 laid and jointed with grey cement slurry and pointed in grey cement mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M & L for continuous brick edging; with width equal to the depth of the brick, laid dry, on edge with old size fly ash bricks complete all as specified and directed

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and Fixing powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc all as specified and directed. Make of Glass:- MODI/ ATUL/ SWASTIK and Make of Aluminium:- Jindal / Hindalco

M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght,and window cills bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges complete all as specified and directed.

Material and Labour for Rolled mild steel section in Roof trusses (framed) trussed purlins, crane gantries, rails and fastening and heavy bracket framing ( Beam tee, angle channel or flat sections) etc quality conforming to Fe 410-W (Gde-E-250) complete all as specified and directed

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

S & F mild steel, bright finish, Butt hinges "medium weight" steel 100mm size all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp, stape (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm long complete all as specified and directed.

Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section all as specified and directed.

Supply and fixing 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing 125mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Supply and fixing 0.56mm Plain Aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) complete all as specified and directed.

S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed.

S&F Stainless steel steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

Supply and Fixing in repairs rotational moulded triple layered white coloured polyethylene water storage tank, cylindrical, hoisted & fixed in position all as specified, capacity 500 ltrs including dismantling old water tanks of same capacity complete all as specified and directed.

S&F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type,chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both/one end fixed to GI pipe complete all as specified and directed.

Supply and Fixing 15mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan, pedestal pattern, white, with 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to drain pipe (or outgoing pipe) and to flushing pipe etc. including plastic water closet seat cover, white, closed pattern with flat bottom and cover, fixed with MS chromium plated or aluminium hinging device ISI marked as approved and making good to floor complete all as specified and directed.

Supply and Fixing in repair WHB vitreous China white flat back size 550 x 400mm incl brackets, PTMT waste coupling and PVC waste pipe including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F in repair 18-20mm dia fancy type mild steel PVC coated curtain rod of approved shade including side brackets/ junctions/ wall to wall and pair of decorative finial caps as approved complete all as specified and directed.

S&F in repair Stop valves, cast copper alloy fancy type, chromium plated with long shank and cup (concealed type),screwed down high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and Fixing in repair long body CP bib taps, 15mm bore, fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified.

Supply and Fixing in repair PVC connection pipe 15mm bore, 450mm long with PTMT nuts complete all as specified and directed.

Supply and Fixing in repair Gun-metal, globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.

Supply and Fixing in repair CP brass tubular towel rail 20 mm dia 'D' type, 60 cm long between flange complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and Fixing in repair stainless steel kitchen plate rack made out stainless steel of not less than 1mm thick sheet of size 900mm x 600mm x 200mm of approved pattern complete all as specified and directed..

Supply and Fixing kitchen sink with drainage board, made out of 1mm thick stainless steel sheet with plug, washer, stainless steel waste coupling, PVC waste pipe including bedding in cement mortar, connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Material and Labour 100x75 mm dia cast iron nahani trap, with grating including jointing to waste pipe, fixed in plain cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate complete as directed.

M&L for cement concrete 1:2:4 type D-1 (using 40 mm graded stone aggregate) as in foundation, fillings and mass concrete complete all as specified and directed.

Supply and Fixing rolled mild steel in Joist, channel, angle, or tee sections, circular tubes fixed independently as in posts, pillars, stanchions etc. including welding, grinding complete confirming to Fe 290 Gd E-165. complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed

Surface excavation not exceeding 30cm deep and average 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated material soils exc 50m but n. exc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 87 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 87 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 87 above but for one Call bell / buzzer point controlled by one bell push

All as per item no 87 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F bell push single pole one way 5 Amp 230 volts complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed at site.

S&F Call bell (Ding dong) AC single pole 230 Volts complete all as specified and as directed at site.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

S&F in repair 1200mm long wall mounted decorative batten only suitable for 18/20 W LED tube light fitting with extruded aluminium housing, frosted diffuser, integrated electronic driver with decorative end cap complete with all required fitting arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Havells cat no. REGAL BATTEN8UPTO1X22WDSBSWH or Eveready Easylite box cat no. INBOXFR1X18W or HPL LED Legacy cat no. HPLLEDT820(CW).

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S&Fin repairs bulk head light fitting made from cast aluminium body with heat reistance pressure die cast housing, IP 65 protection cover suitable for bulk head fitting integrated type 7/10 W LED 6000K including in built electronic driver complete including Electrical connection with PVC three core copper flexible wire from ceiling rose to fitting terminal complete all as directed by Engineer -in-charge. Make : Philips Vistaglow ordering code WT140W LED7S CW PSU S1 PC, Havells HEXA 10W IP66 ordering code HEXAFT 10WLED857SSYMBOPC, C&S (Sirius series) ordering code LTB10WLED/ Bajaj wee plus cat no BIBWP 6W LED

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2 core stranded conductor nominal cross section including taking out old unserviceable cable complete all as specified and directed.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Make:- Havells ES Neo /Usha Technix plus/Orient energy star

Taking down carefully electric meter of any capacity from wall or any position by disconnecting all connection and refixing the same including all electric connection and acessories as required including new wooden board of suitable size complete all as specified and directed.

Taking down carefully ceiling fan/exhaust fan of any capacity from any position by disconnecting all connection and refixing the same including all electric connection and acessories as required after overhauling, oiling, greasing etc. complete all as specified and directed.

M & L for sand cushioning to under ground cable 8cm deep before laying and 15cm deep after laying cable and gently punned down and levelled complete all as specified and directed

Supply and laying of sub class 'B' bricks old size laid flat over the cable as protection of cable complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

M/S Reliance Construction

M/s Chandra Mohan and Sons

M/S SWATI CONSTRUCTION

M/S S S A ASSOCIATES