Loading…
Loading…
Tender Value
₹48.0 L
EMD Value
₹95,920
Closing Date
17 Oct 2026, 6:00 pm
Garrison Engineer (central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8762 SPL REPAIR/REPLACEMENT TO CATTLE FENCING ALONGWITH GATES AND PCC FLOORING ALONG PROJECT QTRS FROM 18B TO D-6 AT AFMC UNDER GE (CENTRAL) PUNE
2026_MES_791272_1
8762 SPL REPAIR/REPLACEMENT TO CATTLE FENCING ALONGWITH GATES AND PCC FLOORING ALONG PROJECT QTRS FR
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (central) Pune
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central)
₹95,920
Yes
26 Sept 2026
26 Sept 2026
20 Oct 2026
26 Sept 2026
17 Oct 2026
10 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of brickwork or stone/boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed. | 42 | Cum | - | - |
| 2 | Dismantling posts or struts (Wood, Steel or RCC), any section embedded in concrete, brick work etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed. | 140 | Rm | - | - |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, with in a lead of 50 m in all kind of soil complete all as specified and directed. | 189 | Cum | - | - |
| 4 | M&L for cement concrete in foundations, filling and mass concrete, type D2 (1:4:8) (40 mm graded aggregate) complete all as specified and directed. | 42 | Cum | - | - |
| 5 | M&L for Pre-cast cement concrete block masonry with solid blocks, type D-5, 1:5:8, exc. 10 cm in width and setting in mortar, complete, built in cement mortar (1:6) complete all as specified and directed. | 63 | Cum | - | - |
| 6 | M&L for cement plaster in 1:4 Rendering 15mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed.
Note : Surface finish shall be well troweled and spong finish. | 700 | Sqm | - | - |
| 7 | M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. | 700 | Sqm | - | - |
| 8 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat Iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. | 3,858 | Kg | - | - |
| 9 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide or Zinc chrome primer on new steel surfaces complete all as specified and directed. | 109 | Sqm | - | - |
| 10 | Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete all as specified and directed. | 104 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
TENDER8762.pdf
Tender Documents • 1.17 MB
BOQ_887098.xls
BOQ • 2.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .