Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
1 Mar 2023, 6:00 pmClosed
office of the Executive Engineer Jal Shakti (M) GW
office of the Executive Engineer Jal Shakti (M) GWD Division Jammu
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark II Hand Pumps and construction of platforms at 03 Nos locations i.e. at W.No.6 of Pyt. Dhanna, W.No. 6 near Kelu Baba of Pyt
2023_PHE_205901_1
e- NIT NO. GWD/200 of 2022-23
Open Tender
Drilling Works
Item Rate
20 days
as per BOQ
As per tender Documents
8 documents required · 8 mandatory
₹1,000
Executive Engineer Jal Shakti (M) GWD Division Jam
office of the Executive Engineer Jal Shakti (M) GW
4 Mar 2023
22 Feb 2023
2 Mar 2023
22 Feb 2023
1 Mar 2023
24 Feb 2023
23 Feb 2023
Amount
Deep Drilling of 125 mm dia Bore Holes by using ODEX method including providing, installation, testing, commissioning of Mark–II Hand Pumps and construction of platforms at 03 Nos locations i.e. at W.No.6 of Pyt. Dhanna, W.No. 6 near Kelu Baba of Pyt. Athoon and W.No. 6 near Shiv Temple under the Jurisdictions of DDCs Keerian Gandyal of District Kathua on Turnkey Basis (EPC) under District Capex Budget 2022-23 (DDC Grants)
Deep drilling of bore hole 125 mm dia. as per the strata encountered including installation, testing and commissioning of M-II Hand Pump as per IS specifications by using ODEX method. The job includes extraction of MS Casing Pipe if any required during the drilling work and construction of platform as per site conditions.
Providing of 125 mm dia. M.S.Casing Pipe. The 125mm dia. M.S. Casing Pipe ISI marked should have thickness of 5.4mm conforming to as per IS 4270 / 2001 medium class (Part-I) 2004 (Heavy C – Class, weight per mtrs = 18.11 kg) electric resistance welded beveled ended inside beed free pipes. All pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. There should be no circumferential weld. The pipe from inside should be beed free having smooth finish. Each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with IS 4270/2001 with latest amendments. All the physical and chemical properties of pipe including tensile strength should be in accordance with IS 4270/2001 with latest amendments.
Providing of M-II Hand Pump Extra Deep. Mark-II Hand Pump should be ISI Marked, complete set conforming to IS: 15500: Part 2: 2004 (with latest revisions) consisting of 16 Nos. connecting rods electro galvanized (12mm dia. 3 M long) and 16 nos., 3 M long 32 mm dia. G.I. Pipes (B-Class) one end fitted with G.I. Socket made of seamless pipe or solid bar and other end with threaded protector as riser pipes along with Cylinder Assemblies. The job includes the cost of material as well as labour charges. Complete Job.
Providing of Riser Pipe 32 mm extra. Additional length of Riser Pipe of 03 M each which shall be hot dip galvanized screwed and socketed pipe confirming to IS: 1239 (Part 1) medium class. Pipe ends shall have smooth finish and shall be free of burrs or sharp machining chip. Internal surface of pipes shall not have any lump of zinc. One end of pipe shall be fitted with hot dipped galvanized socket and other end with thread protector.
Providing of connecting rod extra Additional length of connecting rods of 12mm dia. x 3 M long with hex coupler made of bright bar, electro- galvanized conforming to relevant IS Code.
Extraction of 125 mm dia. M.S. Casing Pipe in case of dry bore hole.
M/S VISHAWKARMA ENGG & BORING WORKS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .