Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC 320N SRINIVAS BUILDING CHINNAMMAL STREET SAIBABA COLONY COIMBATORE TAMIL NADU 641038 | COIMBATORE | TAMIL NADU | 641038 | ₹10.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹12.1 L+₹2.1 L (21.2%)Rejected-Finance | ₹12.1 L+₹2.1 L (21.2%) | L2 | Rejected-Finance NOT A LOWEST PRICE |
| 3 | Rejected-Technical 5TH STREET CHENNAI TAMIL NADU 600101 | CHENNAI | TAMIL NADU | 600101 | - | - | Rejected-Technical Reject |
| 4 | Rejected-Technical SALEM | SALEM | SALEM | TAMIL NADU | - | - | Rejected-Technical Reject |
| 5 | Rejected-Technical 104 2ND FLOOR SAI SUBHIKSAM COMPLEX 225 CHELLAPPA GOUNDER STREET KATTOOR COIMBATORE 641009 | COIMBATORE | TAMIL NADU | 641009 | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | MIG TECHNICAL SERVICES H1 | SINETEC TECHNOLOGIES H2 |
|---|---|---|---|---|---|
| 1.00Purchase of Electronic Equipments | |||||
| 1.01 | Digital Storage Oscillos copeFeature Specification (Minimum Requirement)
Analog Channels 2
Bandwidth 100 MHz
Sample Rate 1 GS/s (all channels)
Record Length 20 k points
Vertical System Sensitivity: 1 mV/div – 10 V/div (1-2-5 sequence, 1X probe) DC Gain Accuracy: ±3 % Max Input Voltage: 300 V RMS, Cat II Input Coupling: DC / AC Input Impedance: 1 MΩ ±2 % ∥ 14 pF ±2 pF Bandwidth Limit: 20 MHz selectable
Horizontal System Time Base: 2 ns/div – 100 s/div (1-2-4 sequence) Time Base Accuracy: ±25 ppm
Acquisition Modes Sample, Peak Detect, Average, High-Resolution, Roll
Trigger System Modes: Auto / Normal / Single Types: Edge, Pulse Width, Runt Sources: CH1, CH2, External, AC Line
Measurements 32 automatic measurements (Period, Frequency, Rise/Fall Time, Duty Cycle, P-P, RMS, etc.)
Math / Analysis Add, Subtract, Multiply, FFT with selectable windows
I/O Ports USB 2.0 Host (mass storage)
USB 2.0 Device (PC control/communication)
Probe Compensation Output 5 V, 1 kHz
Power 100–240 V AC ±10 %, 45–65 Hz (360–440 Hz for 100–132 V) Power Consumption: ≤ 40 W | 2 | Nos | 2,58,000 ₹3,04,440 | 2,12,850 ₹2,51,163 Lowest |
| 1.02 | Arbitrary Function Generator Feature Specification (Minimum Requirement)
Channels 2 independent
Standard Waveforms Sine, Square, Pulse, Ramp, Noise, plus ≥40 built-in arbitrary waveforms
Sine Frequency Range 1 µHz – 25 MHz (Burst: 2 mHz – 25 MHz)
Square / Pulse Range Square: 1 µHz – 12.5 MHz; Pulse: 1 µHz – 12.5 MHz
Ramp Range 1 µHz – 1 MHz
Arbitrary Waveform 1 µHz – 10 MHz; 125 MS/s sampling; 14-bit vertical resolution; 2–8 k points memory
Output Amplitude 1 mVp-p to 10 Vp-p (50 Ω load) / 2 mVp-p to 20 Vp-p (Hi-Z)
DC Offset ±(5 Vpk – Amp/2) into 50 Ω; ±(10 Vpk – Amp/2) Hi-Z
Amplitude Accuracy ±(1 % of setting + 1 mVp-p)
Harmonic Distortion < 0.2 % (10 Hz–20 kHz, 1 Vp-p)
Spurious < –45 dBc
Rise/Fall Time < 10 ns (typical)
Jitter (rms) < 6 ns
Modulation AM, FM, PM, FSK (internal or external) Internal modulating freq: 2 mHz – 20 kHz
Sweep Sine ≤25 MHz, Square ≤12.5 MHz, Ramp ≤1 MHz; linear/log; 1 ms – 500 s
Burst Count, gated or infinite; internal/external/manual trigger
Frequency Counter 100 mHz – 200 MHz; 6-digit resolution
Output Impedance 50 Ω (typical); selectable 1 Ω–10 kΩ or Hi-Z (display compensated)
Protection Short-circuit tolerant, auto-disable on over-current
Reference Clock External 10 MHz input (lock ±9 kHz); 10 MHz output
Interfaces USB 2.0 Host & Device
Power 100–240 V AC, 50/60 Hz; ≤28 W | 2 | Nos | 2,04,000 ₹2,40,720 | 1,68,300 ₹1,98,594 Lowest |
| 1.03 | PROGRAMMABLE DC POWER SUPPLYFeature Minimum Requirement (Lock Spec)
Output Channels 3 (Two 30 V channels, one 6 V channel)
Output Voltage Range CH1: 0–30 V, CH2: 0–30 V, CH3: 0–6 V
Output Current Range CH1 & CH2: 0–1.5 A each, CH3: 0–5 A
Total Output Power ≥ 120 W
Load/Line Regulation Voltage: ≤ 0.01 % + 3 mV; Current: ≤ 0.01 % + 3 mA
Ripple & Noise ≤ 1 mVrms / 3 mV p-p (≤ 7 MHz); ≤ 5 mArms current noise
Setting Resolution Voltage: 1 mV; Current: 1 mA
Programming Accuracy Voltage: ±(0.03 % + 10 mV); Current: ±(0.1 % + 5 mA)
Meter Resolution Voltage: 1 mV; Current: 1 mA
Meter Accuracy Voltage: ±(0.03 % + 10 mV); Current: ±(0.1 % + 5 mA)
Isolation Output-to-chassis and output-to-output float up to 240 V (DC + peak AC ≤ 3 V p-p, ≤ 60 Hz)
Transient Response < 150 ms to within 75 mV for 0.1 A→1 A or 1 V→11 V step
Tracking / Combination Series mode up to 60 V (CH1+CH2) Parallel mode up to 3 A (CH1+CH2)
Memory ≥ 30 setup memories
Interfaces USB
AC Input 100–240 V AC, 50/60 Hz (switchable or model-dependent)
Power Consumption Triple-channel model ≤ 450 VA
Environmental Operating: 0 °C to +40 °C, 5–95 % RH (non-condensing) Storage: –20 °C to +70 °C | 2 | Nos | 3,68,000 ₹4,34,240 | 3,03,600 ₹3,58,248 Lowest |
| 1.04 | High-Voltage Differential Probe :Specifications for High-Voltage Differential Probe
Parameter Specification
Interface BNC / Probe
Attenuation 50× / 500×
Maximum Differential Voltage ±130 V (50×) / ±1300 V (500×)
Maximum Common-Mode Voltage ±1300 V
Maximum Input to Earth 1000 V CAT II
Bandwidth (typical) 50 MHz
Rise Time (typical) < 7 ns
Input Impedance (differential) 10 MΩ ‖ 2 pF
Input Impedance (each side to ground) 5 MΩ ‖ 4 pF
CMRR (typical) DC > 80 dB, 100 kHz > 60 dB, 3.2 MHz > 30 dB, 50 MHz > 26 dB
DC Gain Accuracy ±2 % | 1 | Nos | 1,96,000 ₹2,31,280 | 1,61,504 ₹1,90,575 Lowest |
Tender Value
Refer Docs
Closing Date
1 Dec 2025, 6:00 pmClosed
Dr.V.THIRUNAVUKKARASU
GOVERNMENT COLLEGE OF ENGINEERING BARGU-635104
PURCHASE OF ELECTRONIC EQIPMENTS
2025_DoTE_623556_1
4764/B1/ECE/2025
Open Tender
Laboratory and scientific equipment
Supply
10 days
GOVERNMENT COLLEGE OF ENGINEERING BARGUR
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
Exempted
23 Jan 2026
14 Nov 2025
3 Dec 2025
14 Nov 2025
1 Dec 2025
14 Nov 2025
Purchase of Electronic Equipments
PROGRAMMABLE DC POWER SUPPLYFeature Minimum Requirement (Lock Spec) Output Channels 3 (Two 30 V channels, one 6 V channel) Output Voltage Range CH1: 0–30 V, CH2: 0–30 V, CH3: 0–6 V Output Current Range CH1 & CH2: 0–1.5 A each, CH3: 0–5 A Total Output Power ≥ 120 W Load/Line Regulation Voltage: ≤ 0.01 % + 3 mV; Current: ≤ 0.01 % + 3 mA Ripple & Noise ≤ 1 mVrms / 3 mV p-p (≤ 7 MHz); ≤ 5 mArms current noise Setting Resolution Voltage: 1 mV; Current: 1 mA Programming Accuracy Voltage: ±(0.03 % + 10 mV); Current: ±(0.1 % + 5 mA) Meter Resolution Voltage: 1 mV; Current: 1 mA Meter Accuracy Voltage: ±(0.03 % + 10 mV); Current: ±(0.1 % + 5 mA) Isolation Output-to-chassis and output-to-output float up to 240 V (DC + peak AC ≤ 3 V p-p, ≤ 60 Hz) Transient Response < 150 ms to within 75 mV for 0.1 A→1 A or 1 V→11 V step Tracking / Combination Series mode up to 60 V (CH1+CH2) Parallel mode up to 3 A (CH1+CH2) Memory ≥ 30 setup memories Interfaces USB AC Input 100–240 V AC, 50/60 Hz (switchable or model-dependent) Power Consumption Triple-channel model ≤ 450 VA Environmental Operating: 0 °C to +40 °C, 5–95 % RH (non-condensing) Storage: –20 °C to +70 °C
High-Voltage Differential Probe :Specifications for High-Voltage Differential Probe Parameter Specification Interface BNC / Probe Attenuation 50× / 500× Maximum Differential Voltage ±130 V (50×) / ±1300 V (500×) Maximum Common-Mode Voltage ±1300 V Maximum Input to Earth 1000 V CAT II Bandwidth (typical) 50 MHz Rise Time (typical) < 7 ns Input Impedance (differential) 10 MΩ ‖ 2 pF Input Impedance (each side to ground) 5 MΩ ‖ 4 pF CMRR (typical) DC > 80 dB, 100 kHz > 60 dB, 3.2 MHz > 30 dB, 50 MHz > 26 dB DC Gain Accuracy ±2 %
SINETEC TECHNOLOGIES (BID ID -1523873)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.23 MB
BOQ_745586.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .