Providing and fixing aluminium partition and furniture at Atma Ram Memorial Museum and Archives at CSIR-CGCRI, Kolkata.

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) Prelaminated particle board conforming to IS: 3087 - 1985 and IS 12823 -1990. Both side decorative laminate Exterior grade.9mm thick

Both Side Display stand: Providing & placing Display box on the teak wood stand display box of size 48” Length x 36” Height made from 3.5mm clear acrylic sheet, including soft board covered by good quality velvet at both side and the bottom stand is made of 3” x 3” teak wood frame. With necessary groove polished painted etc. all complete as per the drawing and direction of Engineer-in-charge.

Display Narration Stand: Providing & placing Display box on the teak wood stand display box of size A3 paper, made from 3.5mm clear acrylic sheet and the bottom stand is made of 3” x 3” teak wood frame. With necessary groove polished painted etc. all complete as per the drawing and direction of Engineer-in-charge.

ESCON INDIA