Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹8.7 L+₹80,195 (10.2%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹8.9 L+₹1.0 L (12.8%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹8.9 L+₹1.0 L (13.1%)Admitted-Finance VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L4 | Admitted-Finance | |
| 5 | L5₹9.4 L+₹1.5 L (19.3%)Admitted-Finance 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S SHIVA TRADERS L5 | M/s Indu Enterprises L1 | M/S A.R BUILDERS L4 | M/S SACHENDRA KUMAR JAIN L3 | M/S JAI BALAJI TRADERS L2 | M/s Dinesh Kumar L7 | PRATAP CONSTRUCTION L6 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted . | 600 | Sqm | 10 ₹6,000 | 15 ₹9,000 | 17 ₹10,200 | 5 ₹3,000 Lowest | 5 ₹3,000 Lowest | 5 ₹3,000 Lowest | 5 ₹3,000 Lowest |
| 2.00 | Dismantling of timber scantling 40 Sqcm and over in section in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed | 0.5 | Cum | 500 ₹250 | 500 ₹250 | 178 ₹89 Lowest | 350 ₹175 | 200 ₹100 | 300 ₹150 | 500 ₹250 |
| 3.00 | Dismantling of timber fillets , rails, posts, rafters, purlin etc under 40 sqcm in section, in any position in unframed work complete all as specified and as directed. | 350 | RM | 10 ₹3,500 | 2 ₹700 Lowest | 7 ₹2,450 | 5 ₹1,750 | 2 ₹700 Lowest | 12 ₹4,200 | 10 ₹3,500 |
| 4.00 | M&L for 2nd class hard wood exc 13 & n exc 25 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed | 350 | RM | 50 ₹17,500 | 5 ₹1,750 Lowest | 34 ₹11,900 | 40 ₹14,000 | 160 ₹56,000 | 15 ₹5,250 | 30 ₹10,500 |
| 5.00 | M&L for clean sawn 2nd class hard wood as in scantling more than 40 Sqcm in sectional area fixed to timber/iron frame work complete all as specified and as directed Engr-in-Charge | 0.5 | Cum | 30,000 ₹15,000 | 25,000 ₹12,500 | 34,000 ₹17,000 | 42,000 ₹21,000 | 32,000 ₹16,000 | 16,000 ₹8,000 Lowest | 50,000 ₹25,000 |
| 6.00 | Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required. | 200 | Per Cm depth | 10 ₹2,000 | 10 ₹2,000 | 7 ₹1,400 Lowest | 150 ₹30,000 | 15 ₹3,000 | 15 ₹3,000 | 50 ₹10,000 |
| 7.00 | S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified | 2,030 | Kg | 90 ₹1,82,700 | 85 ₹1,72,550 | 101 ₹2,05,030 | 82 ₹1,66,460 Lowest | 88 ₹1,78,640 | 85 ₹1,72,550 | 90 ₹1,82,700 |
| 8.00 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. | 500 | Sqm | 680 ₹3,40,000 | 580 ₹2,90,000 Lowest | 648 ₹3,24,000 | 595 ₹2,97,500 | 585 ₹2,92,500 | 745 ₹3,72,500 | 625 ₹3,12,500 |
| 9.00 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. | 90 | Sqm | 580 ₹52,200 | 550 ₹49,500 | 548 ₹49,320 | 510 ₹45,900 Lowest | 610 ₹54,900 | 715 ₹64,350 | 600 ₹54,000 |
| 10.00 | M&L Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed. | 50 | Sqm | 60 ₹3,000 | 20 ₹1,000 | 10 ₹500 | 7 ₹350 Lowest | 30 ₹1,500 | 38 ₹1,900 | 90 ₹4,500 |
Tender Value
₹10.0 L
EMD Value
₹20,000
Closing Date
14 Sept 2026, 6:00 pmClosed
BRIJ BIHARI, AE (CIVIL), AGE (I) TALBEHAT
AGE (I) TALBEHAT, LAKEVIEW CAMP MIL STN TALBEHAT 284125
REPAIR/MAINT TO ROOF SHEET FALSE CEILING AT ZONE -9B AT MIL STN TALBEHAT
2026_MES_784422_1
AGE(I)/TBT/TOK-44/2026-27
Open Tender
Civil Works
Item Rate
180 days
LAKEVIEW CAMP MIL STN TALBEHAT
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
AGE(I) Talbehat
₹20,000
Yes
17 Sept 2026
13 Aug 2026
16 Sept 2026
20 Aug 2026
14 Sept 2026
27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and as directed. Note:- opening of existing wind tie where required for taking down of AC sheet is deemed to be included in the rate quoted . | 600 | Sqm | - | - |
| 2 | Dismantling of timber scantling 40 Sqcm and over in section in any position such as in rafter, purlins etc in unframed work complete all as specified and as directed | 0.5 | Cum | - | - |
| 3 | Dismantling of timber fillets , rails, posts, rafters, purlin etc under 40 sqcm in section, in any position in unframed work complete all as specified and as directed. | 350 | RM | - | - |
| 4 | M&L for 2nd class hard wood exc 13 & n exc 25 Sqcm plain fillets, square, rectangular in section, clean sawn, secured with nails or brads complete all as specified and directed | 350 | RM | - | - |
| 5 | M&L for clean sawn 2nd class hard wood as in scantling more than 40 Sqcm in sectional area fixed to timber/iron frame work complete all as specified and as directed Engr-in-Charge | 0.5 | Cum | - | - |
| 6 | Cutting holes into or through brick wall built in cement lime mortar and walls of cement concrete of superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required. | 200 | Per Cm depth | - | - |
| 7 | S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified | 2,030 | Kg | - | - |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. | 500 | Sqm | - | - |
| 9 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. | 90 | Sqm | - | - |
| 10 | M&L Preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed. | 50 | Sqm | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.40 MB
TENDER.pdf
Tender Documents • 0.93 MB
BOQ_878930.xls
BOQ • 2.49 MB
AMENDEMENT.pdf
PDF • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .