Constructing Annakshetra at Shree swami Munishwar Ambarnath Rane Maharaj Datta Darbar At Sangulwadi Tal Vaibhavwadi

1)Providingstructuralsteelworkintrusses,othersimilartrussedpurlinsandmemberswithallbracing,gussetplatesetc.asperdetaileddesignsanddrawingsorasdirectedincludingcutting,fabricating,hoisting,erectingfixinginposition,Makingriveted/bolted/weldedconnectionandonecoatofanticorrosivepaintandoverit2coatsofoilpaintingapprovedquality and shade etc. complete.

2) Providing and fixing of colour coated Zinc aluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed for anticapacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 900 mm girth (Surface Width).

3)Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side )profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coatedwithAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steelquality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coatingthickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 umreverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center. Theend rib shall be designed for anti-capacity groove. and return leg. The feed material should have coilmanufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52Kilogram/Square Metre) 600 mm girth (Surface Width)

4)Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.P/I -169/24.01 (R.A)

5) Providing laterite stone masonry in cemen morter 1 : 6 in foundation and plinth including racking out joints when plastering is to be done/ striking joints when no plastering is to be done watering and scaffolding. P/I - Circular No.1 / 5.

6) Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and ompacting etc. complete.

7):- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

8):- Providing Laterite stone masonry in cement mortar 1:6 in Cum Superstructure including racking out joints when plastering isto be done/striking joints when no plastering is to be done watering and scaffolding.

9):- Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.

10):- Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

11) :Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

12):- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. P/I - 201/32.03(R.A)

13):- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Please Enable Macros to View BoQ information