SPECIAL REPAIRS OF BLDG NO P08 SM BARRACK T69 AND T71 UNDER GE ARMY DHAR ROAD. JOB NO. Z SRB44 2024 25

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete

Demolition of cement concrete of any description complete all as specified.

Dismantling of cast iron or reinforced concrete or PVC drain pipes including all fittings and accessories, 100/75 mm dia and in any position all as specified.

Dismantling water tanks 500/1000 Ltrs capacity and removing to store.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete.

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6)

M&L for Brickwork with subclass `B' bricks, straight or curved on plan to any radius in half thick brick built in CM(1:4)

S & F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass / gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part - I section 8.20 (a), all as specified and directed by Engr-in-Charge

S & F Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge.

S&F Factory made solid PVC Moulded frame 50x95mm made up 5mm colour single prelam PVC sheet and reinforced with MS aqure tube supplyin & fixing in opening as per specification

S/F Factory made solid PVC Moulded shutter 28-30mm thick styles with 2,4 or 6 raised panels design with 5mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam sheet on the back face with article board core. (Make : Rajshree of equivalent approved).

S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified .

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 300 mm long.

S&F Aluminium alloy butt hinges 100mm long with galvanised mild steel hinge pin type C 21.

S&F MS butt hinges 100mm long medium weight cold rolled mild steel etc

S & F Continuous (piano) hinges mild steel, bright finish or electro glvanised 30mm width of flaps(when open).

S&F MS 300mm long ordinary rat tail rod pattern spring incl roller and plate complete all as specified

S&F aluminium handles extruded aluminium alloy handle fabraication type, 200 mm size complete, all as specified .

S&F 150mm long Hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws.

S&F in repair Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire cloth and average width of aperture 1.40mm and fixed with stainless steel wire staples

S& F in repairs Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified .

S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixed with galvanized steel staples supplied and fixed complete to wood or steel member, weight exc 4 kg per Sqm.

S & F for Mild Steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S & F steel windows made up of steel section of 16 gauge MS sheet, complete all as per TD drg No CEUZ/TD/1269/2008 sheet no 1/3 to 3/3 dt: 31 Oct 2008 including taking down all as specified as and directed by engr-in-charge.

S & F steel ventilators made up of steel section of 16 gauge MS sheet, complete all as per TD drg No CEUZ/TD/1269/2008 sheet no 1/3 to 3/3 dt: 31 Oct 2008 including taking down all as specified as and directed by engr-in-charge.

S&F Pressed steel frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, incl filling hollow of frame with plain cement concrete type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified as directed

S&F Pressed steel frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate incl filling hollow of frame with plain cement concrete type B0 (1:3:6 ) (using 12.5mm graded aggregate ,etc complete all as specified as directed.

M&L for 50 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 40 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floors finished rough all as specified.

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified.

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

Roughening surfaces of old concrete floor above roof by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sq m all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on roof surfaces finished even and smooth without using extra cement, after rushing neat cement slurry with 3.00 Kg of cement per sq m and using WPC all as specified dir3ected by Engr -in Charge.

Supply only liquid water proofing compound.

M&L for Roof treatment for Non Accessible Roof :- priming the roof surface with bituminous primer conforming to IS-3384 @ 0.30 ltrs/Sqm and applying a coat of hot blown 85/25 grade bitumen conforming to IS-702 @ 1.20 Kg/Sqm and thereafter provide polymeric water proofing membrane (five layered) of weight not less than 3 Kg/Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85/25 grade bitumen @ 1.20 Kg/Sqm blinded with fine sand in dry condition @ 0.50 Kg/Sqm, Top surface of roof after carrying out treatment as specified here in above as per manufactur instructions.

M&L for Chicken wire mesh of size 12.5 mm and wire dia 0.51 mm (24 SWG) hexagonal construction, stretched firmly for roof treatment.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) for roof pedding, finish even and smooth without using extra cement.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified .

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

Supply only liquid water proofing compound

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .

M & L for Preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for applying two coats of OBD on walls including 2mm thick wall care putty, on new plasterd surface plastered surfaces, preparatory to distempering over and icluding a coat of primer complete all as specified and as directed.

Preparing new surfaces applying three coats of white wash on wall complete all as specified.

Preparing old decorated wall surfaces applying two coats of white wash on wall complete all as specified.

Preparing old decorated of ceiling surfaces applying a coat of white wash complete all as specified.

Preparing new ceiling surfaces applying three coats of white wash complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

Preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint, all as specified.

Preparation of new wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

Preparation of old wooden or wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified.

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 4mm thick all as specified

All as per item No 57 above but frosted glass.

Taking up or down steel tubing with connections for cleaning for prefixing complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for prefixing complete of bore 20mm, all as specified .

S&F 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings all as specified.

Fixing only 15mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

Fixing only 20mm bore steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings

S&F in repair Bib taps, long body, fancy type, chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, fixed in repair, all as specified.

S&F in repair CP Pillar tap, fancy type chromium plated with crutch or butterfly handle screwed down high pressure with or without letterd HOT or cold with lomg scred shanks and fly muts screwed fpr iron piped all as specified.

S&F in repair CP Stop/angle valves 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm long complete.

S&F in repair Brass chromium plated shower rose 125 mm size with arm swivel joints, any size incl fixing to steel pipe or union complete all as specified.

S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified

S&F in repair vitreous china wash basin counter type white with oval shape size of 540x450mm bowl fixed in counter with cutting proper fixing and jointing and moulding of marbel all as specified and directed including brackets, including cutting for and pinning in ends of bracket e

M&L Black Garnite 18-20mm thick (Jet black or superior quality) of any type work table rubbed and polished for plate form and counter type for wash hand basin 18-120m m thick machine cut and polished of approved colour ( Black zet with Granite polish) incl setting and jointing in neat cement slurry and pointed in coloured cement to match the services of marble counter granite etc complete.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specied.

ditto all as above but 6 to 8 mm dia and over and including in stirrups, spacers and binders.

M/L mild steel TMT bar 6 mm to 8mm dia cut to length bend to shape required including cranking bending etc and mild steel wire not less than 0.9mm dia as directed.

M&L for RCC Nominal mix type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

S&F in repair stainless steel Soap dish fixed to plugs chromium plated brass screws, all as specified.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

S&F PVC(SWR) pipes, 75 mm type B 6kg/Cm2 external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips complete all as specified.

S&F PVC(SWR) pipes, 110 mm Type B 6kg/cm2 external dia double socketed in any length with rubber joints, fixed to walls or laid in trenches with PVC brackets/clips complete all as specified.

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

S&F PVC(SWR) bends suitable for 75 mm external dia complete all as specified

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia

S&F PVC (SWR) junction single, (single T) equal or unequal of 75mm dia

S&F PVC (SWR) vent cowl of 110mm bore

S&F PVC (SWR) vent cowl of 75mm bore

Add to items No 87,89 & 91 for 75mm bore pipes for provided with access door all as specified and directed

Add to items No 86,88 & 90 for 110mm bore pipes for provided with access door all as specified and directed

S&F Rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres all as specified .

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in 20mm PVC Nipple suitable for HDPE Water tank (Min Wt 15mm-38gms) complete

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) , with or without hole all as specified.

S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate. Nothing extra shall be paid on this account.

Dismantling of corrugated or semi corrugated steel/Asbestos sheeting, of any description, roof coverings all as specified.

S&F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.

S&F in repair Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, all as specified and directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified

Dismantling of wrought / mild steel work of any description

M&L for machine cut kota stone slab 18-20 mm thick as in floor of over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

All as per item No 105 above but as in skirting, steps, etc. and 15mm thick screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete.

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

S&F for 4mm thick non asbestos fibre cement designer board ISI marked fixed with screw to aluminium frame work in ceiling flat or sloppy with anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605mm including hangers 6mm dia GI (up to 1200mm long) adjusting level fixed to roof complete all as specified and directed.

All as per item No 94 above but except sheet

Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following: - (a) After demolition of floor & lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:3) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Filling with PCC 1:7:12 with broken bats in demolished portion of sunken part in all as specified and directed (e) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sq. m and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on floor & sides of sunken slab sealing all joints to the entire satisfaction of Engineer-in-Charge. MAKE: LAFARGE, TEXA, STP, BENGAL AQUAFLUX.

Dismantling timber scantling 40 sqcm and over in section, in any position

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets,bell push , ceiling rose, pendants, Holders, etc

T/D old unserviceable submain wiring any size 4/6 Sq mm 02 run copper conductor single phase with earth wire including PVC conduit

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) all as specified and directed by Engineer-in-Charge for the following :-

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One 3 pin 6/5 Amp socket outlet controlled by one switch independent board.

One 3 pin 6/5 Amp socket outlet controlled by one switch same board.

All as per item No 3 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

S&F socket outlet 3 pin, 6 Amp piano flush type including complete all as specified and as directed.

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed.

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and as directed.

Supply & Fixing medium step type fan regulator 240 Volt AC, socket size, medium step" ISI marked complete all as specified and directed.

M & L for sub main wiring with two run of FRLS PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FRLS PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments incl PVC conduit medium grade 25 mm dia and PVC insulated copper conductor cable drawing in PVC rigid conduit , connecting incoming / outgoing electric connections by using required size copper lugs / thimbles and making good the disturbed surface to match with existing complete in all respect all as specified and directed. Note :- 1. Two run of single core cable with one run of contineous earth wire of copper conductor wire Flexible (Multistrand) of FRLS PVC insulated shall be measured and paid as one unit length.

Supply & Fixing SPN Distribution Box, double door of protection grade IP 42 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & Fixing MCB SPN, 40 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply and fixing VTPN Distribution Box with MCCB 125 Amp breaking capacity,16 KA double door of protection grade IP 42, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as existing surface complete all as specified and directed.

S&F Wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

S&F Wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver including dismantling taking down unsv sketch fitting any type complete all as specified and directed.

S&F in replacement of old sketch fitting/any type by decorative wall mounted light with LED lamp 09 watt (white/ warm) complete all as specified and directed

S&F LED building security light 35 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade suitable size dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismentling taking down unsv fitting any type all as specified and directed.

Supply only LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismentling taking out unsv CFL/LED Bulb. Make- Havells/CG/Philips/Wipro

Taking down existing ceiling fan serviceable type and deposite MES safe coustedy all as directed after complition of B/R work refixing of ceiling fan including fixing necessary arrangements complete all as specified and directed.

Taking down existing Exhaust fan serviceable type and deposite to MES for safe coustedy all as directed

Supply & fix ceiling fan BLDC complete 230 V,1200 mm sweep. BEE star rated not less than 5 including T/D old ceiling fan and deposit in MES store yard ,fixing arrangement and connection with 3 core flexible copper cable all as specifed and directed .

Supply & fix electric water heater 25 ltr complete 230 V,. BEE rated including all fixing arrangement and connection all as specifed and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep ,900 RPM with louver including cutting of hole of adequate size including making good existing surfaces incl fixing with MS fasnut all as specified and directed.

Taking down Old unserviceable rusted earthing plates

supply and laying XLPE cable 25x 4 core complete all as specified and directed by Engineer incharge

supply and laying XLPE cable 16X2 core complete all as specified and directed by Engineer incharge

Excavation in trenches in Hard and dense soil n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation of poles,cable laying etc, including forming bottom surface to required level and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in soil/loose soil including spreading, leveling,watering & well ramming in layers not .exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches and punning down complete all as specified and directed by Engineer-in-Charge.

Material and labour cover to underground cable with one layer of bricks using sub class 'B' bricks laid flat acorss the cable complete all as specified and directed by Engineer-in-Charge.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

Deduct Schedule of Credit of Rs. (-) 78304 .00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

M/S SANJAY STEEL WORKS (BID ID -3279534)

SHIVAE CONSTRUCTION (BID ID -3277487)

S K CONSTRUCTION (BID ID -3279547)

PARAS RAM ASGOTRA AND SONS (BID ID -3279528)

MandeepConstructionCo (BID ID -3279573)

s l sharma and sons (BID ID -3279790)

M/s Khajuria Construction Co. (BID ID -3279957)

M/S. RAM PAUL KHAJURIA & BROS. (BID ID -3279591)