Construction of independent water works laying of DI pipe line providing FHTC in village Noonsar Distt. Bhiwani Under CM Announcement No. 25344 dt. 07.03.2020 under JJM

Amount

Providing and fixing floating arms along with swivel bend as per required specifications approved by Engineer - In - Charge. (200mm) complete in respects.

Supply and erection of Horizontal spindle spilit casing type pumping sets of minimum Four (4) star rating duties directly coupled to Ac squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw Water Pump 600 LPM, 12.00 Mtrs. Head 5.00 BHP

B) Clear Water Pump 600 LPM, 40 Mtrs. Head 10.00 BHP

Supply and Fixing following CI D/F pipe and specials/Bell Mouth including cost of joining materials, laying, jointing, refilling including making adequate support of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the Department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water puping sets at water works in position, as per specification given in schedule No. II. A) CI D/F pipes I. 100 mm i/d

II. 150 mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500X1200mm and 400mm deep having following accessories:- 1. Incomer switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100X100mm range 0 to 500 V (AE/KAPPA/L & T 4. Indicating lamp-one set.

A)Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm and 400mm deep having following items:- A) For Raw water pump sets for 600 LPM x 12.00 M head = 2 Nos. (a) Main switch 100 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 2 No. (AE/KAPPA/L&T) (c) Amp. meter 100X100 mm range 0 to100 Amp. 2 Nos. (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 2 No. each of approved make (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 Nos. for 600 LPM x 12.00 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 2 No.

B) Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200X900mm having following accessories:-A) For Clear water pump sets for 600 LPM x 40 M head = 2 Nos. (a) Main switch 100 Amp. 2 Nos.. (L & T Siemens, ABB). (b) Volt meter 100X100 mm range 0 to 500 volt 2 No. (AE/KAPPA/L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS & ASS 2 No. each of approved make (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 Nos. for 600 LPM x 40 M Head Motor (L&T Simens, AAB) (h) Capacity KVAR as per site requirement (i) Indicating Lamp-One Set ( j) Change over switch 100 Amp. = 2 No.

Supply, erection, testing of standard make wiring of 4 nos. motors with underground system in PVC and flexible pipes copper wire size 10 Sq mm complete in all respects with accessories like thimble etc. complete in respects.

Supply, erection, testing of ISI marked copper wire for 3 Nos. panel boards from main switch to panel and wiring of panel with size 25 Sq. mm copper wire ISI marked complete in all respect with accessories like thimble etc. complete in respects.

Supply, erection, testing of light fittings including wire in the Pump Chamber with material up to 10 points including switch, button, plug, PVC conduct pipe and Copper wire etc. as per approved specifications complete in respects.

Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in respect..

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.

Providing, laying, jointing and fixing of cast iron "V" notch with dully makred with beam including embedding in 1:2 cement and grouting, levelling up to finishing complete in respects.

Supply, erection testing of reputed make LED light 100 watts with fitting and accessories complete in all respect (Bajaj/Philips Crompton)

Supply erection of "Wall Mounting type, solenoid driven, motor-less, electro-magnetic disphragm Dozing Metering pump working on single -phase 220/240 V. / 50 Hz, electric supply with standerd electronic controls, suitable for minimum dozing capacity 0-5 LPH, at 8 bar back pressur"e complete with necessary accessories. Make Fontus or any other standard make along with supply & erection of supply & erection of 1 No. voltage stablizer with each dozing pump alongwith 1 No. 300 ltrs. capacity ISI marked HDPE storage tank, with each dozing pump of "Sintex" other reputed & approved make.

Raw Water Pumping Station Supply and erection of Horizontal Spindle spilit casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. Clear water pump 900 LPM, 30 Mtrs. Head 12.50 BHP

Supply and fixing following CI D/F pipe and specials/Bell Mouth including cost of joining materials, laying, jointing, refilling including making adequate support of masonary/concrete tank upto the rising main laid by the Department as per plan shown from the foundation wall of pump chamber for all the raw water and clear water pumping sets at water works in position, as per specification given in schedule no. II. B) CI D/F Pipes I. 100mm i/d

I. 150mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories :- 1. Incomer swich 200 AMP. 2. Aluminium bus bar chamber of 300 amp. Capacity. 3. Volt meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp-one set.

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly slouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm having following accessories :- A) For Clear water pump sets for 900 LPM x30 M head =2 nos. a) Main switch 100 Amp. 2 nos. (L&T Siemens, ABB). b) Volt meter 100 mm x100 mm range 0 to 500 volt 2 no. (AE/KAPPA/L&T) c) CT 100/3 Nos. (AE/KAPPA/L&T) d) VSS & ASS 2 no. each of approved make e) SPP 2 no. of approved make f) Motor starter, star delta 2 nos. for 900 LPM x 30 M Head Motor (L&T Siemns, AAB) g) Capacity KVAR as per site requirement h) Indicating Lamp-One set i) Change over switch 100 Amp. = 2 nos.

Supply, erection, testing of standard make wiring of 6 nos. motors with underground system in PVC and flexible pipes copper wire size 10 sq mm complete in all respect.

Supply, erection, testing of ISI marked copper wire for 3 nos. panel boards from main switch to panel and wiring of panel with size 25 sq. mm copper wire ISI marked complete in all respect

Supply, erection, testing of light fittings including wire in the pump chamber with material up to 10 points including switch, button, plug, PVC conduct pipe and copper wire etc. as per approved specification complete in all respect.

Providing and fixing ceiling fan 1400 mm (56”) with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in all respect.

Providing and fixing exhaust fan 18” i/d (450 mm) complete with suitable GI sheet of approved make complete in all respect

Supply, erection, testing of reputed make LED light 100 watts with fitting and accessories complete in all respect.

Supplying erection, testing and commissioning 1 no. of 20 KVA silent D.G. set comprising of Kirloskar make water cooled Diesel Engine modal 4 R810TA-G1 (CPCB Norms II complaint) Developing 83 BHP @ 1500 RPM & 20 KVA Kirloskar Green make alternator rated at three phase, 415 volt, 50 Hz,0.8 P.F. @1500 RPM both mounted @aligned on acommon base frame complete with MS fuel tank, AMF, Control panel, residential exhaust silencer, AVM Pads fitted on base frame, 1 no. 12 volts DC battery with battery leads etc. The rating should be at 1500 RPM a) Diesel Engine b) Alternator c) Base Plate d) Battery & Battery cum charger 24 V A) AMF Panel i) Motorized change over switch 200 Amp-4P with fuse base and HRC links 200 Amp. ii) Under voltage/over voltage relay- 2 nos. 415 VAC iii) Engine start lay 24 VDC – 1 no. iv) Electonic Timer 24 VDC – 1 no. v) Electonic Timer 24 VAC – 3 no vi) Auxiliary relay 220 VAC- 2 no. vii) Auxiliary relay 220 VDC – 3 nos. viii) Metering set 415 VAC-1 set (AMP, Meter, volt meter, ASS,VSS, Phase Indicate, Control Fuse, Frequency meter, CT’s) ix) Metering set 24 VDC (Amp,meter, Volt meter) x) Over load protection for DC – 1 No. xi) Battery charger 24 VDC (Bluetron make) xii) Coppe bus bar of suitable size xiii) KWH meter 96 sq. mm size xiv) Starting fuse button and key switch (On/Of) XV Engine protection unit with audiovisual alarm and shut down for low lubricating oil pressure and high callent temperature, set running, load on DC control on Note :- AMP panel shall installed as per technical specification attached as per annexure A, ii ) Acousite encloser shall installation as per technical specification attached as annexure B.

Providing and fixing of 15 mm GI union nominal bore complete in all respect and the entire satisfaction of EIC(make Jindal/Parkesh/Tata) complete in all respect.

Providing and fixing of ½” mm GI elbow complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/Parkash/Tata) complete in all respect.

Providing and fixing of ½” mm GI socket complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/Parkash/Tata) complete in all respect.

Operation and Maintenance Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material suppled by the PHED) as per schedule-IV for a period of 5 year after 12 months during defect liability period 3 months trial run (will be charged to the A/mtc. estimate. Operation and maintenance during defect liability period (Operation only)

(i) Operation and maintenance during the 1st year after defect liability period

(ii) Operation and maintenance during 2nd year

(iii) Operation and maintenance during 3rd year

(iv) Operation and maintenance during 4th year

(v) Operation and maintenance during 5th year

Bidder Name

Amount

SUNIL SHARMA(GSTN-NA)

BALJIT SINGH CONTT(GSTN-NA)

SUNIL KUMAR CONTRACTOR(GSTN-NA)

SUNIL SHARMA

SUNIL KUMAR CONTRACTOR

SUNIL KUMAR CONTRACTOR

BALJIT SINGH CONTT