PROVN OF 01XTOILET BLOCK FOR BLDG NO. P05, COVERED PARKING SHED NEAR BLDG NO. P23 AND TRAINING SHED ALONGWITH PLINTH AND DRAIN AT UMROI MIL STATION UNDER GE UMROI

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earthor broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil, complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and getting out in soft/loose soil, complete all as specified and directed

Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed

Material and labour for Cement concrete 1:4:8 (Nominal mix), Type D2 (40 mm graded aggregate) as in foundations, filling and mass- concrete complete all as specified and directed.

Material & Labour for Cement concrete 1:2:4 (Nominal mix), Type B2 (40 mm graded aggregate) as in foundations, surface channels and drains, Complete all as specified & directed

Material & Labour for Cement concrete 1:2:4 (Nominal mix), Type B1 (20 mm graded aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, Complete all as specified & directed

Material & Labour for Cement concrete 1:2:4 (Nominal mix), Type B0 (12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating Complete all as specified & directed

Material and labour for Damp proof course of 40 mm thick in cement concrete 1:2:4, type B-0( using 12.5 mm graded stone aggregate) to horizontal or vertical including necessary formwork and applying evenly a coat of blown type bitumen @1.5kg per Sqm and binding with dry sand @ 0.5Cum per Sqm complete all as specified and directed .

Material & Labour for reinforced Cement Concrete (Nominal mix) Type A1, 1:1.5:3 (20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Material & Labour for reinforced Cement Concrete (Nominal mix) Type A1, 1:1.5:3 (20 mm graded aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed.

Material & Labour for reinforced Cement Concrete (Nominal mix) Type A1, 1:1.5:3 (20 mm graded aggregate) as in Beams, lintels, supported on walls, beams etc, complete all as specified and directed.

Material & Labour for reinforced Cement Concrete (Nominal mix) Type A1, 1:1.5:3 (20 mm graded aggregate) as in slab supported on walls, beams etc, complete all as specified and directed.

Use & waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Use & waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and directed.

Use & waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces, complete all as specified and directed.

Use & waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, overhangs etc, for rough finished flat surfaces, complete all as specified and directed.

Use and waste of Formwork rough finished to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed.

Supply & Fix TMT bars 10mm dia and above cut to length bent to shape required including cranking, bending spirally for hooping, hooling ends and binding with mild steel wire (annealed) not less than 0.9mm dia , complete all as specified and as directed.

All as per above items but 6 mm to 8mm dia of bar.

S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, 70 cm long ( L-Shaped with 10 cm leg), dia of neck 20mm, complete all as specified and directed.

Material & Labour for Pre-cast cement concrete 1:3:6, type C1 (20 mm graded aggregate) as in block masonry with solid blocks, exc.10 cm in width and setting in mortar 1:6, Complete all as specified & directed

Material & Labour for Pre-cast cement concrete 1:3:6, type C1 (20 mm graded aggregate) as in block masonry with solid blocks, n. exc.10 cm in width and setting in mortar 1:6, Complete all as specified & directed

Supply & fix Rolled mild steel Fe - 410-W (Gde-E-250) quality "B"sections as in Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections, Complete all as specified & directed

Supply & fix Rolled mild steel Fe - 410-W (Gde-E-250) quality "B"sections as in main and cross beams, hip and jack rafters; purlins where connected tocommon rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Complete all as specified & directed

Supply & fix Rolled mild steel Fe - 410-W (Gde-E-250) quality "B"sections as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Complete all as specified & directed

Supply & fix Rolled mild steel Fe - 410-W (Gde-E-250) quality "B"sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, Complete all as specified & directed

Supply & fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck 12mm, 5cm long, Complete all as specified & directed

Supply & Fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed.

Material & Labour for hardcore of brocken stone gauge n,exc 63mm deposited spreed and leveled in layers n. exc. 15cm thick water and rammed to true surfaces complete all as specified and directed.

Material & Labour for 100 mm thick cement concrete 1:2:4 type B2 using 40 mm graded aggregate as in flooring including finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

Material & Labour for 40 mm thick cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in flooring finishing cement concrete surface even and smooth without using extra cement, Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete type C2, 1:3:6, using 40 mm graded aggregate as in plinth protection, finishing cement concrete surface even and smooth without using extra cement, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto, complete all as specified and directed.

Forming expansion joint 100mm deep 12mm thick filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified and directed.

Material & Labour for Rendering 15mm thick in CM 1:6 on fair faces of block work or concrete surfaces, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for Rendering 10mm thick in CM 1:3 on fair faces of block work or concrete surfaces, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for Rendering 05 mm thick in CM 1:3 on fair faces of block work or concrete surfaces, rendering is to be finished even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for Three coats of white wash including preperation of newly plastered surface of walls and ceiling complete all as specified and directed.

Material & Labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Material & Labour applying two coats of synthetic enamel paint over a coat of red oxide primer on new or previously untreated steel surface of girth exc 10cm width or girth complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in any type of soil, complete all as specified and as directed.

Removing excavated soil not exc 50m and depositing where directed at level not exc 1.5m above the starting point, complete all as specified and directed.

Material & Labour for 15 mm thick Screed bed or bedding layer of cement mortar 1:6, laying for floor finishes complete all as specified and directed.

Material & Labour for 10 mm thick back coat layer of cement mortar 1:6, laying as in verticle surface such as skirting and dado etc. complete all as specified and directed.

Supply & Fix Non - skid Ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply & Fix Glazed ceramic tiles in vertical surface 350x250x 7 mm/450 x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Supplied and fixed Steel ventilator with top hung shutter including hinges steel peg stay and painting of two coat of synthetic enamel paint over one coat of zinc chromate primer complete all as specified and directed.

Supply and fix 3mm thick figured glass, pin headed type and glazing with oil putty or aluminium glazing clip in square n exc 0.5 sq. m in each complete all as specified and directed.

Supply & fix Rolled mild steel of Fe - 410-W (Gde-E-250) quality "B"sections as in framing for door or gates or sign board, cladding, flazing and the like fixed with angle cleats and connecting plates, etc. including painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractors workshop before fabrication complete all as specified and directed.

S& F min 1 mm thick Mild steel Plain sheeting, in doors ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed

Supply & Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed.

Supply & fix Factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with particle board with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet Polyurethane paintedonthe front face and 2 mm prelam PVC sheet on back face in frame at site as specified and directed.

Supply and fix aluminum anodised barrel tower bolt ISI marked 150mm long of extructed section all as specified and as directed.

Supply and fix aluminum anodised handle cast type ISI marked 150 mm, anodised all as specified and as directed.

Supply and fix butt hinges 100 mm long extruded aluminium alloy ISI marked with galvanised mild steel hing pin type B-21 as specified and as directed.

Supply & Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply & Fix Wash basins, Vitreous China (flat back or angle back type) of size 630 x 450 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fix Pillar taps of 15mm , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

Supply & Fix Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for fixing supply pipe to flushing discharge pipe (Exclusive of cistern, trap and waste pipe) complete all as specified and directed

Supply & Fix 10ltr capacity Low level PVC valveless, syphonic action type fluslhing cistern, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

Supply & Fix CP Bib taps 15mm, fancy type, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply & Fix CP Stop valves 15mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

Supply & Fix CP Stop valves 25mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

Supply & Fix PVC connection 15 MM size with PTMT nuts of length 450MM complete all as specified and directed.

Supply & Fixing Tubes medium grade(ISI marked), 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Supply & Fixing Tubes medium grade(ISI marked), 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Supply & Fixing Tubes medium grade (ISI marked), 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors Complete all as specified and directed.

Supply & Fix 500 ltr Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & Fix Ball brass valves (ISI marked) of 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as directed.

Supply & Fix Gun-metal, globe or gate valves (ISI Marked) for iron pipe 20mm bore with iron wheel head, screwed both ends complete all as specified and directed.

Supply & Fix PVC P-trap, 125/110 mm bore ISI Marked complete all as specified and directed.

Supply & Fix PVC (SWR) floor trap ISI Marked 75mm bore,palin with grating inclusing jointin with slvent cement complete all as specified and directed.

Material & Labour precast RCC 1:2:4, type B1 using 20mm graded aggregate as in drain cover slab supported on walls, desk slabs and shelves including necessary formwork, complete all as specified as directed.

Material & Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces shall be done in two layers, 1st layer shall be of 10mm thick and 5mm thick 2nd layer mixed with water proofing compound @ 3% by weight of cement finishing the surfaces with fair and even without using extra cement complete all as specified and directed. Note: Integral water proofing compound shall be paid and measured separately.

Supply only integral water proofing compound ISI marked.

Material & Labour for Reinforced concrete pipes 150mm bore, class NP3, laid and jointed complete with collars, complete all as specified and as directed.

Material & Labour Concrete 1:3:6 (40mm graded aggregate) as in bed to drain pipes 150mm bore (dia) including packing under, and haunching against the sides of pipes after they are laid and tested; complete all as specified and as directed.

Construction of septic tank for up to 25 users as per drawing no. TD/SZ/504 attached with tender documents complete all as specified and as directed. NOTE: - The construction of septic tank shall be carried out as per Particular specifications formaing part of contract.

Construction of soakage pit for up to 25 Users as per drawings no. CESZ/TD/63, complete all as specified and as directed. NOTE: - The construction of Soakage Pit shall be carried out as per Particular specifications formaing part of contract.

Material and labour for applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof. b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course). cont to item no 85

In continuation with item no. 84 here in-above d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs. e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm. f) The whole system shall be left for air cure for min Seven days (without any movement). Make : - Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof or as equivalent approved by GE. Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution. (ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) The work shall be executed through well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE

S&F Toilet Paper Holder of stainless steel fixed to walls with chromium plated screws, complete all as specified and direcetd

Material & Labour for 50 mm thick cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

Material & Labour for 80 mm thick, M-40 Grade, prepainted Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 including avarage 50mm thick sand filling as a levelling course, complete all as specified and directed.

Material & Labour for Providing precast cement concrete solid building blocks type C-1 cement concrete 1:3:6, 10mm thick set in cement mortar 1:6, complete all as specified and directed.

Material and labour for point wiring for One light/fan point controlled by one way switch with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping/ PVC conduit pipe including necessary accessories like bends, tees PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed

All as per Sr. Item No. 90 here in before but for One 3 Pin 5 Amps socket outlet point on independent board.

Supply and fixing of switch piano flush type ISI marked 240 Volts 5 Amps, SP, one way complete all as specifed and directed.

Supply and fixing switch socket out let combination multipurpose 3/ 5 pin, 5 Amps and flush type (non shuttered) ISI marked complete all as specified/directed.

Supply and fixing switch socket out let combination multipurpose 5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) ISI marked complete all as specified/directed.

Supply and fixing ceiling rose surface PVC/Polycarbonate ISI marked, 65x50 mm two to three terminals complete all as specified and directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate ISI marked suitable for batten fittings including one no. LED lamp of 9W complete all as directed.

Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: Bajaj/Philips/havells or equivalent in specified make

Supply and fix of MCB SPN DB 8 way for mounting SPN/SP MCBs as incoming/outgoing, factory made, confirming to IS, fabricated out of CRCA sheet , fitted with DIN channel, neutral link and suitable rated bus bar, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process the steel sheet have to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of IP 43-IK 09 with metal door complete all as specified and directed.

Supply & fixing MCB SPN 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Supply & fixing MCB SP 6 to 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Supply and fix exhaust fans AC single phase 230/240 V of size 300 mm sweep plastic body with louver, complete all as specified and directed. Note: Quoted rate shall be deemed to be included of accessories required for fixing and making good disturbed surfaces.

Supply and fixing LED fitting 1x9 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: : Bajaj/Phillips/Havells or equivalent in specified make

Material & Labour for sand cushioning to under ground cable using locally available fine clean dry river sand over,under ground UG cable laid in treches and gently punning to cushioning to cable complete all as directed. Note:- Thickness of sand cushion after punning down will be measured and paid.

M&L for plain cement concrete (1:3:6) type C-1 using 20 mm graded aggregate in cover block of size 230x115x75 mm to cover LT underground cables , laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed.

Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty) of size 10 sqmm 2 core, aluminium stranded conductor 1100 volts grade, laid through duct/ pipe / in trench etc. including cable glands & lugs complete all as specified and directed.

Supply and install lithium based Energy efficient integrated Solar Street light 30/32 watt including Single body encases Solar PV Panel 64/66 Wp monocrystalline capacity > 60 W, Lithium based battery 11.1/12,8V, >21.0 AH with inbuilt BMS, High brightness W-LED(>120 lm/watt) lamp with reflector, CRI > 70, colour temperature 6500K, microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor, Dusk to down operation, working temperature (-) 10 C to (+) 55 C, with adjustable MS Clamp suitable for pole/wall mounting. lights and panel shall have Protections against short circuit, over load, reverse polarity and battery protection. Make; LHSTAKU7CBAF030 of Havells and BSZSL 30W LED of Bajaj and HLSSLINTO201070410-30W-WOPCWL of Halonix and equivalent in ISI marked make

Supply and fix MS Pole (Medium Grade) (Outer Dia 60 mm) 6m high (above ground) duly painted with two coats of white aluminium paint along with one coat of primer for fixing solar integrated light. Pole shall be fixed in PCC 1:3:6 as in foundation of size 0.70m down fixed with plate of 0.30 x 0.30 m x 4mm and coping of height 0.20m above ground shall be done with PCC 1:2:4. Quoted rate shall be inclusive of earthwork and excavation. The pole below the ground shall be painted with one layer of bituministic paint.

Material and labour for point wiring for connecting 15A socket on independent board with 2.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping/ PVC conduit pipe including necessary accessories like bends, tees PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed

M/s Eddy Constructions

Lyngdohs Construction Company And Associates