REPAIR TO ROOF TREATMENT JOINERY KITCHEN BATHROOM FLOORING PLASTER ETC IN MES QTRS AND REAPIR TO DRAINS FENCING SEWAGE LINES GARBAGE BINS ETC AT OLD CANTT UNDER AOR OF AGE B R II OF GE N PATIALA

Amount

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leaping complete all as specified and directed.

Scraping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as specified and directed.

M&L PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregates as in padding over roof, minimum thickenss at khurra as 25 mm to maintain a slope of 1:100 complete all as specified and directed.

Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

S&F factory made, un-reinforced precast cement concrete tiles of size 250mm x 250mm x 22mm, machine pressed, as on roof surface, confirming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 incl mixed with WPC (Water proofing compound shall be paid separately), set jointed and pointed with grey cement slurry complete all as specified and directed.

S&F PVC(SWR) rain water pipes, 110 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc as in repairs after taking down existing damaged CI rain water pipe including P or S traps complete all as specified and as directed.

S&F PVC (SWR) bends/tees of any radius for 110mm bore complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete, all as sepcified and directed.

M&L Ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L Anti-skid premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L Single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc.pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 16-18 mm thick including bull-nose the front length, set and jointed in cement slurry pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite and fixing complete all as specified and directed.

S&F in repairs Vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed.

S&F CP brass jet spray with 1.5M PVC flexible tube complete in all respect all as specified and directed.

S&F in repairs Vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including 'P'/'S' trap (100mm bore) connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete all as specified and directed.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed.

S&F Overhead shower 125mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete fixed as in reapir complete all as specified and directed.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair complete all as specified and directed.

S&F pillar tap, CP, fancy type swain neck screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair complete all as specified and directed.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete fixed as in repair complete all as specified and directed.

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair complete all as specified and directed.

Vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed.

S&F Stainless steel sink with drainage board, AISI 304 quality grade, 0.80 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete fixed as in repair all as specified and directed.

S&F PVC waste pipe for sinks, wash basins, urinal etc of length 450 to 900 mm complete all as specified and directed.

S&F Stainless steel grating 100 mm dia for floor trap fixed in position complete all as specified and directed.

S&F Towel rack CP 600 mm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete fixed as in repair complete all as specified and directed.

S&F Cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections, fixed as in repair complete all as specified and directed.

Single Y-shaped CI junction pieces, ordinary or inverted (spigot or socket type) for 100mm bore pipes complete all as specified and directed.

CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

Cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed.

Cast iron cowls of 100 mm dia complete all as specified and directed.

S&f Stainless steel plate rack made out of 0.80 mm thick sheet of overall size 750x900x250mm complete fixed as in repair all as specified and directed.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F single lever Sink mixer with swinging spout with connecting legs and wall flanges, wall mounted fency type chromium plated cast copper alloy screwed down high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F Bathing mixer fancy type, chromium plated 15mm bore, and including connected accessories , complete all as apecified and directed.

Disconnecting existing tanks of any size and type, setting aside (or lowering ir required) for cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and refixing tank in same position incl fixing of necessary fittings which get damaged or broken during disconnecting of tank complete all as specified and directed.

Doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank including taking down old tank of any type and size complete fixed as in repair complete all as specified and directed.

S&F in repairs Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and as directed.

S &F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete, all as sepcified and directed.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified and as directed.

S &F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete, all as sepcified and directed.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as directed and specified.

S&F Towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete fixed as in repair complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete fixed as in repair complete, all as specified and directed.

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed in repair incl necessary welding work if reqd complete all as specified and directed.

S&F Mixer for wash hand basin, fancy type, chromium plated 15mm bore, fixed as in repair complete all as apecified and directed.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down door shutters exc 1 sqm but n.exc 2 sqm and replacing of unserviceable existing butt hinges and re-fixing in same opening including welding and repair etc complete all as specified and directed.

Taking down Shutters of any description exc 1.0 Sqm and n. exc 2.0 Sqm including accessories etc complete all as specified and directed.

M&L for Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L for Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Factory made panelled shutters 35mm thick (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm vennered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (pt 1), kiln seasoned and chemically pressure treated including supply and fixing following items : (a) Mild steel Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

Factory made flush shutters 35mm thick 7ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Mild steel Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Mild steel Butt Hinges 150mm - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm min thickness for chowkats or frame & shutters made of size 44.45x44.45x1.29mm min thickness for side rails and middle rail, 114.3X44.45X1.29mm min thickness for top rails and bottom rails complete all as specified and directed.

S&F aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm min thickness and shutters made of 63.5X31.75X1.29mm min thickness complete all as specified and directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm min thickness complete fixed in all respect as specified and directed.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/ lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and watr tight etc aluminium beads 20mm size with and complete all as specified and directed.

S&F PVC door Frame of size 50mm x 47mm made out of 5mm plain colur PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening, all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame, all as specified and directed.

S & F Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.10mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. Complete fixed as in repaircomplete all as specified and directed.

Preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L Cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

S&F 5mm thick tinted glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete all as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 200mm long complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.

S&F powder coated aluminium handles 150mm complete all as specified and directed.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed.

S&F 100 size PVC butt hinges complete all as specified and directed.

S&F 125 mm PVC handles complete all as specified and directed.

S&F 200 mm long PVC tower bolt complete all as specified and directed.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with SS screws and solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s specifications complete all as specified and directed.

S&F 12 mm thick with min density 600 Kg/cum LEAD FREE PVC Celuka ply fixed with SS screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position complete all as specified and directed.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L Cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for Cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 5mm thick in cemeent mortar 1:3 on ceiling or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls using sand paper and applying two coats of cement base paint over coat of primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer incl acrylic thick wall care putty 1.5 to 2.5mm thick complete all as specified and directed

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer incl acrylic thick wall care putty 1.5 to 2.5mm thick complete all as specified and directed.

M & L Preparing Old Surfaces of Walls and applying one coats of cement base paint , complete all as specified and directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.

M & L 20mm thick cement screed in the ratio 1:6 complete all as specified and as directed

M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

M&L 75mm thick PCC 1:2:4 type B-2 (using 20mm graded stone aggregate) as in flooring complete all as specified and directed.

M&L for 38mm wide 4mm thick AC dividing strips as in flooring complete complete all as specified and directed.

M&L 50mm thick, PCC 1:3:6, type C-2 using 20 mm graded stone aggregate, as in plinth protection finished even & fair without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (20 mm graded aggregate) as in kerbs . Bands, plinth courses , string courses, apex stones, bed plates etc. complete all as specified and as directed.

M & L rubber moulded coloured chequered tiles 30 cmx30 cm x22 mm thick with grey cement and pigment , set jointed and pointed in neat cement slurry as in floor pointed in matching colored polymer cement based grout to match complete all as specified and directed.

Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etc set & jointed in neat cement slurry &pointed in matching colored polymer cement based grout to match complete all as specified and directed.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size grey coloured tiles confirming to IS-15658-2006 of 80mm thickness M-35 Grade complete all as specified and directed.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour coloured tiles confirming to IS-15658-2006 of 80mm thickness M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Machine made kerb stones, prepolished, rubber moulded in cement concrete 1:½:3 type A-1 using 20mm graded crushed stone aggregates, hydraulically pressed laid in trenches including necessary earth work in any type of soil including setting & jointing in cement mortar 1:4 complete all as specified and directed. NOTE: Shape of kerb stone shall be approved by the GE.

Dismantling of post or struts (wood or steel or RCC) any section incl taking embeded portion and making good disturbed ground embeded in concrete

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M/L PCC 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed

S&F MS angle as in iron posts and struts, gates, flat & round bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, bolting etc and similar works like MS flat iron fillets confirming to Fe-290 Gde E-165.

Preparation of new steel surfaces any width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete complete all as specified and as directed.

Preparation of old steel surfaces any width or girth not otherwise described over 10cm width or girth, applying two coats of synthetic enamel paint complete complete all as specified and as directed.

M/L providing RCC Type B1 1:2:4 (20 mm mm graded stone aggregate) as in pre cast fencing post struts etc average sectional area exc 100 Sqcm and not exceeding 250 Sqcm with or mitred Tops incl grouting in natural ground or cement concrete complete all as specified and as directed

S/F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

S/F TMT bar 5 mm dia and over upto and incl 10 mm dia in , stirrups spacers etc cut to length bent to shape requred incl cranking, bending hooking ends binding with mild steel wire (annealed) not less than 0.9 mm dia confirming to Grade-I IS-432 (part I) complete all as specified and as directed

Dismantling fencing barbed wire complete all as specified and as directed

S/F in repair Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed

Fixing only in repairs Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed

S/F mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length exc 10cm but not exc 15cm long complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only chain link MS galvanised fencing, of size 100 x 100 mm spacing (3.15mm dia), complete all as specified and directed by Engr-IN-Carge.

Repairs to gates of any description and size including taking down and repairs to pintle hinges welding if required and bedding in brick or concrete work and check for its movement align the shutter by means of hammering / welding/oiling, lifting the shutter by means of pully or crane by taking safety measuers including replacement of pintle hinges complete all as specified and as directed.

Dismantling of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and as directed.

M&L brick work with subclass B bricks, straight or curved on plan exc 6m mean radious built in CM 1:4 complete all as specified and as directed.

All as per sr item no above but using old bricks obtained from item no 135, complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 using 12.5mm graded stone aggregates to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M & L Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping / kerb and the like including for use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating as directed.

Dismantling brick laid bedded and pointed in any mortar (laid flat or on edge) complete all as specified and directed.

M & L cement concrete 1:3:6 type C2 with 40 mm graded stone aggregate in surface channel and drain complete all as specified and directed.

Bricks, sub class B, laid on edge in drains etc ; old size bricks bedded and jointed in Cement mortar 1:6 and pointed in cement mortar complete all as specified and directed.

All as per item No above but except bricks complete all as specified and directed.

M&L for Flush pointing to brick walls in cement mortar 1:3 complete all as specified and directed.

M&L for raking out joints/ pointing to brick work in walls or to bricks on edge in floors,surface channels, roofs, etc built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' brick old size straight & curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as speicified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms moulds stopped end and complete all as speicified and directed.

Surface dressing/cleaning of vertical side and berms of drain by trimming of surfaces and removing all vegitation bushes/small trees n . Exc 30 cm girth and removing to a distance not exc 50 metres and deposited where directed by Engineer-in-Charge

Cleaning of drains by removing silt, taking out brick bat, pebbles, muds, clay sludge etc from the bottom of drain and culvert bed and removing to a distance n. exc 50 m and deposited where directed. Note : Rates quoted shall include for cleaning and taking out silt beneath culverts.

Demolition of cement conceret Reinforcement cut as reqd to facilitate demolition in ground floor and paving n.exc 15 cm thickness (below or above ground level)

M&L Reinforcement cement concrete1:1.5:3 Type A1 using 20mm graded aggregate in Slabs, shelves supported on walls etc complete all as speicified and directed.

Form work to the soffifts of suspended slabs such as roof slabs , floor slab, exc n.exc 200mm thick complete all as speicified and directed.

Form work to edges of concerete flats etc exc 200cm wide complete all as speicified and directed.

Cleaning the sewage sump wells, septic tanks of any dia depth and in any location etc by taking out complete sludge water and solids mechanically by HCV mounted suction discharge machine having flow back facility with sludge tank of adequate capacity removing & disposing the entire retrieved material to a distance not exceeding 1000 meter outside the periphery of defence land and covering the entire sludge with local earth complete all as directed by the engineer-in-charge. Note : Depth of sludge in the pit shall be measured from the bottom of pit to the existing water/effluent lever prior to ordering the cleaning in the presence of EIC.

Excavation in trenches in soft/loose soil not exceeding 1.50 Mtr wide and not exceeding 1.50 Mtr in depth and getting out in soft/loose soil complete all as specified and directed Engineer-in-Charge

All as per Serial items No. herein before but exceeding 1.5 Mtr and not exceeding 3.00 Mtr depth Note :- The rate quoted should include provision of oxygen cylinder , safety belts and helmet in case of deep earth work as and when necessary.

Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching of manholes coping plinth course bands stops etc incl necessary form works complete all specified and directed by Engineer-in-Charges

Demolition by breaking up drain pipes salt glazed stone ware pipe, AC or reinforced concrete of internal dia 100/150/200/300 mm dia jointed in cement mortar and taking out of from trenches removing the debries from site complete all as specified and directed by Engineer-in-Charge

Reinforced concrete pipes of 150 mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

Reinforced concrete pipes of 200 mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

Reinforced concrete pipes of 300 mmdia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M&L for concrete bed type D-2 1:4:8 using 40mm stone agg) to drain pipes of any dia complete all as speicified and directed.

Returning and filling incl spreading, levelling, water and well ramming in layers not exceeding 25cm thick complete all as specified and directed Engr-in-charge

Removal of excavated material n. exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and formingbranch channel (1/2 round or 3/4section) in cement concrete 1:2:4 mix type B-1smooth finished and reforming benching as required of any size of dia of pipe.

PCC 100mm thick (1:2:4) type B-1, (using 20 mm graded stone agg) as in road cuttings/floorig complete all as specified and directed by Engr-In-Charge.

M & L for precast cement concrete type B0 1:2:4 using 12.5mm gr aggr set in CM 1:4 louvers and jallies 25mm thk (measured solid) incl all mouldings complete all as specified and directed

Arneja Builders

ANIL KUMAR AND CO

HARJIT CONTRACTS