REPAIR TO FENCING,DRAIN,PATH,CULVERT AND GATE ETC AT BASOLI UNDER GE BASOLI

Amount

Dismantling post or struts (wood,steel or RCC) any section including taking out embedded portion embedded in Concrete, brick work, masonry, etc. to receive new fencing post/strut complete all as specified & directed. Note: New post or strut shall be measured and paid separately.

Dismantling of fencing wire mesh any type, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins arches pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Material and labour for cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregated as in foundation & mass concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including, cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed by Engineer-in-Charge..

Supply and labour for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Supply and fix for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified and directed.

Restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (Each line of wire to be measured), complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks straight or curved on plan exc 6.0 m mean radius builtin in cement mortar 1:6, complete all as specified and directed.

All as per Serial item No 9 here in before but except bricks

Supply and fix for Mild steel Framed work as in doors or gates of angle or other section with gusset plates rails, braces etc. complete,drilled for fixing or steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooke and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Material and labour for preparation of steel and iron new surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for 15mm thick plastering in cm 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed of cement mortar in 1:4 for receiving cement concrete tiles and including 75mm thick plain cement concrete type C-2 1:3:6 (40mm graded stone agg) complete all as specified and directed .

Supply and fix in repair for Mild steel, plain black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. incl welding of sheet to frame, complete all as specified and directed.

Material and labour for walling of random rubble stone masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including demolition of brick work or stone masonary built in cement mortar etc complete all as specified directed.

All as per item No 18 here-in-before but except brick complete all as specified and directed.

Dismantling of structural steel work including doors gates but excluding framed truss etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum getting out ,returning,filling in and ramming earth or broken rubble mixed with earth ,in layers n exc 25 cm ,watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed.

Supply only mild steel galvanised chain link fencing of mesh size 75mmx 75mmx3mm including fixing with staining bolt ,binding wire etc complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh size and type of straining bolts etc includin provision of winding wire etc complete all as specified and directed.

Material and labour for Plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, complete all as specified and directed.

Material and labour for Machine pressed precast concrete interlocking paver block(coloured) with grey cement and pigment any shape and size, M-35 grade 60mm thickness conforming to IS-15658-2006 including 50mm thick sand cushioning and 75mm thick cement concrete type C-2 1:3:6 (40mm graded crushed stone aggregate) as in base of floor complete all as specified and directed .

HARI OM ENTERPRISES

Om Sai Ram Builders

BALKRISHAN GUPTA AND SONS

Ashoka Engineers