Repairing of Bank, Post office, Mandi samiti office, Farmar rest house, Godown, Boundarywall , and construction of RCC road in frount of APF No. 1,2,3,4 and 5 , drain, 15x20 M Reseriver Godown no. 1 and 2 C.C. road and 02 No. water stand post in Aur

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead

12 mm cement plaster with cement mortar in proportion 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even smooth .thick plaster mix 1:4 (1 cement :4 coarse sand) etc

Scrapping old white colour wash including disposal of refuse as directed by engineer in charge with in a distance of 60 metres

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

One priming coat & two coat oil distemper on new work including supply of aof all materials ,labour and T& P etc. required for proper completion of the worknew work

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)

Supply and fixing of flush doors, commercial quality conforming of 1.S. 2202 part-1 (1983) including ISI marked oxidized iron fitting with screws, Bolt Hinges, Handles, Siliding bolt, Door Stopper and tower bolt etc. 35 mm thick

Supply and fixing of 4cm (3/2") thick C.P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5min or 2mm or 1.5mm (1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinses, bolts, locks, handles, springs and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary. Fitting with necessary screws to be supplied departmently

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.