GE(S) BTD TOKEN NO 87 OF 2023-24 PROVISION OF CERTAIN SPECIAL REPAIR AND REVENUE AND MINOR WORKS UNDER AGE BR I AND AGE EM IV UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Surface excavation in soft/loose soil n.exc 30 cm deep but averaging 15cm deep complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide & n.exc 1.5m deep for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded crushed/stone agg for foundations, filling & mass concrete complete all as specified and directed.

Returning filling in including spreading, levelling, watering & well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated surplus soil to a distance not. exceeding 50m & depositing where directed at level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for RCC M-25 Design Mix using 20 mm graded crushed stone aggregate as in columns, pillars, piers,posts and struts complete all as specified and directed.

M & L for RCC M-25 Design Mix using 20 mm graded crushed stone aggregate as in Foundations, including rafts, footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed pilesand mass concreteconcrete complete all as specified and directed.

M & L for RCC M-25 Design Mix using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels , Chajjas over 1.5m span complete all as specified and directed.

M & L for RCC M-25 Design Mix using 20 mm graded crushed stone aggregate as in slabs and roof beams supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the like complete all as specified and directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Use and waste of form work to faces of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatter complete all as specified and directed.

Use and waste of form work to formwork to sides of pillars,posts, struts, piers, columns and stanchions complete all as specified and directed .

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L brick work with fly ash bricks straight or curved on plan exc 6.0m mean radius built in cement mortor 1:6 complete all as specified and directed.

M & L rendering 15 mm thick on brick work or concrete surface in CM (1:4) with water proofing compound (WPC to be measured & paid separately) and finishing the surface even and smooth with using. extra cement complete all as specified and directed.

M & L rendering 15 mm thick on brick work or concrete surface in CM (1:6) with water proofing compound (WPC to be measured & paid separately) and finishing the surface even and smooth with using. extra cement complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed .

M&L for Preparation of new plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified and directed. (b) Two coats of acrylic emulsion distemper by using airless spray/roller over and including a coat of acrylic emulsion internal primer, complete all as specified and directed.

M&L for Preparation of new plastered wall surfaces complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified and directed. (b) Two coats of exterior acrylic emulsion by using airless spray/roller over and including a coat of acrylic emulsion external primer, complete all as specified and directed. NOTE FOR SERIAL ITEM 126 to 129 Contractor may use manual scrapping tools for complete removal and surface preparation with prior approval of EIC in case using of mechanical equipments are not possible.

Three coats of white washing on undecorated ceiling surfaces, including preparation of surfaces, complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ including necessary joining cleats,glazing clips, ruber neopren packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and directed.

S & F Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between61 to 80 kg and fixed complete all as specified and directed.

S & F 200 mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F powder costed Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodisedaluminium fittings such as peg stays150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidating complete all as specified and directed.

M&L filling 100mm Hard core, broken to gauge n exc 63mm complete all as specified and directed.

M&L 75 mm thick cement concrete in foundation type D-2 1:4:8 (40 mm graded aggregate ) and mass concrete complete all as specified and directed.

M&L, Machine cut kota stone slab flooring 20-25mm hick over cement screed bed laid over 20mm screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado rendering over 20mm cement screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair complete all as specified and directed.

M & L 75 mm thick, cement concrete 1:3:6, type C1 (20mm graded aggregate) as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth (without using extra cement) incld joints filled with sealing compound complete all as specified and directed.

Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed.

APP based polymeric membrane minimum weight not less than 3 kg/ Sq. m and minimum 3 mm thick reinfoced with polyester non-woven fabric (weight not less than 150 gm/Sq. m), laid on primed roofs & flashing by forced application using Butane torch, and sealing all joints after applying bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC bend etc with rubber ring joints fixed to wall complete all as specified and directed.

Factory made 250 mm x 250 mm size and 20-25 mm thick, PCC tiles with grey cement & no pigment, bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on lime concretre complete all as specified and directed.

S&F re-inforced Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and directed.

Ditto all as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

S & F machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed.

S&F stainless steel plate racks of size 900 x 600mm x 250mm of 1 mm thick, fixed to wall etc complete all as specified and directed.

M & L Cement Concrete type B1 , 1:2:4 mix (20mm graded crushed stone aggregate ) as in bedding , benching of manholes , copings, roof kerbs and surface channel etc. complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 metre mean radius in CM 1: 4 complete all as specified and directed.

S&F cast iron sand cast 100mm size soil waste or vent pipe without ears with cement joint laid in wall/floors/trenches complete all as specified and directed.

S&F cast iron sand cast 75mm size soil waste or vent pipe without ears with cement joint laid in wall/floors/trenches complete all as specified and directed.

Dismantling floor, wall and ceiling boards (fibre,pulp,insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M&L for providing and fixing 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size,on walls fixed with screw to timber framework or with staples on snap grid complete all as specified and directed. (Note : The work will required to be carried at a Height of Approx 40 Feet)

M&L for providing and fixing 12mm thick Perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size,on ceiling fixed with screw to timber framework or with staples on snap grid complete all as specified and directed. (Note : The work will required to be carried at a Height of Approx 40 Feet)

S&F anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.

Supply only galvanised mild steel plain wire of 4mm dia complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for new surface / Complete removal of existing treatment of any description on old wall surfaces of any description, prepration of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified and directed. (b) Two coats of exterior acrylic emulsion by using airless spray/roller over and including a coat of acrylic emulsion external primer, complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame / plastered surfaces with necessary nails as per specifications and drawing lining board complete all as specified and directed.

M&L for painting with one coat of synthetic enamel paint of approved tint and quality on old painted wood and wood based surfaces of any description exceeding 10cm width or girth after preparing the surfaces of any description exceeding 10cm width or girth after preparing the surface etc complete all as specified and directed by engineer-in-charge

M&L for painting with one coat of synthetic enamel paint of approved tint and quality on old painted steel surfaces of any description exceeding 10cm width or girth after preparing the surfaces of any description exceeding 10cm width or girth after preparing the surface etc complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) exc 1.50 sqm but n. exc 4.00 Sqm each and removal from site complete all as specified and directed.

S&F Powder Coated aluminium glazed door shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.

Repair to aluminum door shutter, window, sliding windows,ventilator partition by replacing joining cleats glazing clips rubber packing andoised aluminum snap beading, screws etc complete all as specified and directed. Note : Sheet glass, particle board will be measured and paid separately if provided at site..

M&L prelaminated particle board 12 mm thick,interrior grade,prelaminated one side with decorative choice lamination and other side white lamination fixed with screw to timber/ aluminium frame with snap grid complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frames) n. exc 1.50 sqm each complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, complete all as specified (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

S&F 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.

M & L 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face Venner on both sides. complete all as specified and directed.

S&F three track aluminum powder coated sliding windows using two tracks for glazed window shutter and one track for wire gauged shutter including aluminum grill and provision of necessary rubber gasket fixing glass panes/ wire mesh etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1. NOTE:- Glass panes & wire mesh shall be measured and paid for separately under respective item .

S&F aluminum powder coated vents including provision of necessary rubber gasket for fixing glass panes etc. complete all as specified and directed. shown in drawing No. CE BT/SK-936R sheet 1/1 NOTE:- Glass panes shall be measured and paid for separately under respective item.

S&F powder coated aluminium glazed door with frame of size 100 x33x2mm comprising of shutter rails & stiles (top 75 x 44 x2mm, lock rail 105 x 44 x2mm & bottom rail of 200 x 44 x2mm) of standard extruded aluminium anodisied natural shade/powder coated satin finish sections, closing arrangements, handle for openable shutter and all joindery items required complete with 4.8 mm thick plain/tinted/itched glass, packing with rubber gasket, aluminium beading etc around both sides for fixing of glass as required complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 75 x 50mm, complete all as specified (thickness of steel sheet shall be 1.25mm) complete all as specified and directed.

S & F in repairs of 18mm thick HDHMR board UV coating, exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence ,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap (when open) 30mm complete all as specified and directed.

S&F in repairs telescopic hinges for drawers etc, taking out drawers & refixing the same after replacement of hinges etc complete all as specified and directed.

Supply and fixing in repair 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and fixed complete all as specified and directed.

S & F for catcher such as in cupboards etc to catch & support shutters of best quality complete all as specified and directed.

S & F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and directed.

S & F to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and directed.

S&F Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple or fixed with beads supplied with joinery, complete all as specified and directed.

M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 6 sqcm and n. exc 13 sqcm, complete all as specified and directed.

S & F in mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Aluminum anodised handles cast type 125 mm long complete all as specified and directed.

S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S & F 300mm mild steel ordinary rat tail rod springs (helical spring) , including roller & roller plate, fixed with screws/welding to steel frames/chowkats, complete all as specified and directed.

S & F hasp & staple 100mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for 25mm dia stainless steel pipe curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed.

S & F for 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S & F for 4 mm thick, figured glass, pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

Welding in repairs n. exc 6mm thick metal and n. exc 2.50 cm in length complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks tripple layer of 1000 Litres capacity, white in colour, (cylindricalvertical tanks with closed top) hoisted and fixed in position including inlet, outlet fitting and 25 mm bore PTMT float valve complete all as specified in SSR Part - I including dismanatling of old water tank and removing to store complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks tripple layer of 500 Litres capacity, white in colour, (cylindricalvertical tanks with closed top) hoisted and fixed in position including inlet, outlet fitting and 25 mm bore PTMT float valve complete all as specified in SSR Part - I and including dismanatling of old water tank and removing to store complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) incl rubbish of the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking , sweeping clean & washing down with watetr to remove dust etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles 350x250x7 mm/450x350x7mm thick on vertical surfaces, etc. set and jointed in neat cement slurry/paste and pointed to match the surfaces over and incl 10 mm thick plaster in CM 1:4, complete all as specified and directed.

M & L light/dark shade vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughening surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M & L for light/dark shade vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) over 10 mm thick screed in CM 1:4 as in cooking platforms steps, jambs, pillars, window- cills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including demolition of stone slab/tiles complete all as specified and directed.

Demolition of brick work of any description built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' (Old Size) bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4) complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.

S & F GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed.

S &F in repairs long body bib taps 15mm bore, Chromium Plated, cast copper ally, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps, cast copper alloy, chromium plated, fancy type with long screwed shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore, brass CP basin mixer system with popup waste with 450mm long braided hosed screwed down, screwed for screwed for iron pipe or for brass ferrule ccomplete all as specified and directed. Make - Jaquar cat part No COP-051BPM or any other equvalent make approved by GE.

S & F in repairs 15mm bore, brass sink mixer with swinging spout on upper side (wall mounted model) with connecting legs and wall flanged screwed down, screwed for screwed for iron pipe or for brass ferrule complete all as specified and directed. Make - Jaquar cat part No FON-4065 or any other equvalent make approved by GE.

S & F in repairs CP stop valves, cast copper alloy, fancy type with long shank and cup (concealed type)complete all as specified and directed.

S & F in repairs 15mm bore CP angle cock screwed both ends for iron pipe complete all as specified and directed.

S & F 32/40mm size waste fittings, brass, CP, for glazed ware sinks, basins etc. with long flange end embedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, wastes but including brackets complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan with integral flushing cistern and seat cover single piece including connection to drain (or outgoing pipe) including all accessories for fixing and making the seat fully functional etc. complete all as specified and directed. Make:- Jaquar Cat Part No. OPS-WHT-15851SN or as approved by GE from list of make attached in tender documents.

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified and directed.

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 90 cm complete all as specified and directed.

S & F in repair PVC valveless, syphonic action type flushing cistern,10 ltr capacity, low level, with inlet ball valve, float and handle including brackets, PVC bend long type and connectin to flush pipe of any size and pattern complete all as specified and directed.

S & F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed.

S & F in repair single lever exposed shower mixer with provision for connection to exposed shower pipe & hand shower with connecting legs and wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. LYR-38145 and SHA-1213 or as approved by GE from list of make attached in tender documents.

S & F in repair single lever wall mixer with provision of hand shower without hand shower for connection to exposed shower pipe and hand shower with connecting legs and wall flange complete all as specified and directed. Make:- Jaquar Cat Part No. LYR-38119 or as approved by GE from list of make attached in tender documents.

S & F brass chromium plated overhead shower dia 140mm round with rubit cleaning system with suitable shower arm 300mm length complete all as specified and directed. Make:- Jaquar Cat Part No. OHS-1757 or as approved by GE from list of make attached in tender documents.

S & F in repairs PVC connections 15mm size with brass nuts of length 750mm complete all as specified and directed.

S & F in repairs health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.

S & F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.

S & F chromium plated towel ring complete all as specified and directed.

S & F Corner glass shelf (25cm/30cm ) with CP brass bracket & railing etc; complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard & railing 60 cm long, complete all as specified and directed.

S & F in repairs soap dish stainless steel , complete all as specified and directed.

S &F PTMT mirror cabinet of size 380x450mm best quality confirming to sample kept in GE's office, complete all as specified and directed.

S & F in repairs brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F stainless steel plate racks of size 900mmx600mmx250mm having thickness of SS strip 1mm, fixed on wall etc complete all as specified and directed.

S & F in repairs CP grating (with or without waste hole), 125 mm size, fixed on floor/nahani traps etc complete all as specified and directed.

S & F in repairs Toilet paper holder recessed type stainless steel complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 75mm bore(sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 100mm bore(Sand cast) with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F in repairs CI bends any radius, 100mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.

S & F in repairs CI bends any radius, 75mm bore, diminishing pieces or tapers, etc with or without oval access doors, complete all as specified and directed.

Demolition of re-inforced cement concrete of any description & in any position not otherwise specifically provided for, complete all as specified and directed.

M&L providing cement concrete (RCC/PCC) 1:2:4, type B0 (using 12.5mm graded crushed stone agrregate) as in broken or cracked Chhajjas, RCC columns, beams, stairs/steps etc in one or two layers as required (thickness from 25mm to 40mm) and finshing the surface with 15mm thick cement plaster in CM 1:4 including taking out loose/cracked concrete portion and plaster etc and applying neat cement slurry before providing concrete, complete all as speicified. (Note : 1. Rates deemed to include for any scaffolding/ ladders or any other mean to work in two story buildings including welding of reinforcement. to be provided for repairs of chhajjas, beams, columns, stair case, fins, facia etc. 2. The re-inforcement shall be measured & paid in subsequent item separately )

M&L for Complete removal of existing treatment of any description on old wall surfaces and prepration of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and as directed and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified and as directed. (b) Two coats of acrylic emulsion distemper by using airless spray/roller by authorizedapplicator and approved make. Note :- Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engineer-in-charge. Note :- Before applying painting in Bldgs a sample path of size 2 Mtr x 2 Mtr to be done for approval of GE. Cost for same included in the rates quoted by the contractor.

M&L for Complete removal of existing treatment of any description on old wall surfaces and prepration of surfaces by mechanised sander having suction vacuum bag using smart periodical methodology complete all as specified and applying the following: - (a) Applying wall care putty, in two coats on wall surfaces & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed), complete all as specified. (b) Two coats of exterior acrylic emulsion by using airless spray/roller over and including a coat of acrylic emulsion external primer, complete all as specified and as directed. Note :- Contractor may use manual scrapping tools for complete removal and surface prepration with prior approval of engineer-in-charge. Note :- Before applying painting in Bldgs a sample path of size 2 Mtr x 2 Mtr to be done for approval of GE. Cost for same included in the rates quoted by the contractor.

M&L for preparation of old decorated, plastered/unplastered or concrete surfaces on walls including cornices, chajjas & pillars etc.; by brooming down, steel wire brushing; scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, etc. and applying Two coat of exterior emulsion paint over wall and ceiling surfaces including cornices & pillasters etc as per manufacturer's specification & instruction; complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description exc 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparation of old painted steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint, quality, colour on these surfaces, including cleaning of floor/wall/glass pane surfaces complete all as specified and directed.

M & L for Antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion & 2.25 litres per linear metre including drilling and plugging holes etc in apron/plinth etc., complete all as specified and as directed

M & L for anitermite treatment of voids in masonry using chemical emulsion one litre per hole at 300mm intervals incl drilling holes at 45 degree and replugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to match the exisitng floors. Complete all as specified and as directed.

Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of disposal off rubbish upto a distance n.exc 100m, where complete all as specified and directed.

Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:3), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified and directed. Note: Supply only WPC will be measured and paid for separately under respective item.

M&L for lime concrete using 40mm thick brick aggregate laid to slope over RCC roof as padding complete all as specified and directed.

Factory made 250mmX250mm size and 20-25mm thick PCC tile with Grey cement and no Pigment Bedded over 15mm thick cement mortar 1:4 Joints grouted flush in CM (1:3) mixed with 5 % of crude oil by weight of cement on lime concrete complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and directed.

Making benching with PCC (1:2:4) type B1 (20mm stone graded aggregate) using WPC along side wall adjoining to roof in concave shpe complete all as specified and directed.

S & F of 18mm thick UV coating, MDF board exterior grade, Both side laminated with 9 layer melamine sheet of any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs complete all as specified and directed. NOTE:- Sample as approved by GE

S & F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed.

S & F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape complete all as specified and directed.

S & F stainless steel modular thali-plate basketSS 304, size of 520x485x200mm, heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S & F stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances or other equivalent make as approved by GE.

S & F stainless steel Bloo basket 202 for modular ktchen basket utensils drawer wired set of 6 (size 530 x 500mm) with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. Make : Godrej Kitchen appliances or other equivalent make as approved by GE.

S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.50 Sqm in each pane complete all as specified and directed.

INTERNAL ELECTRIFICATION

Taking down carefully to existing serviceable copper point wiring (light,fan, socket or power) complete including fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, callbells etc removing materials to E/M store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

Taking down carefully exhaust fan/ceiling fans with blades, dismantling blades of ceiling fan and depositing the same to E/M store yard complete all as specified and directed

Taking down carefully electric water heater storage type (Geyser) and depositing the same to E/M store yard complete all as specified and directed

Dismentling & Taking down carefully existing panel/meter board and electric/electronic meters, deposite the same meters safely to E/M store yard for refixing complete all as specified and as directed.

M&L for wiring with 1.5 sqmm size starnded FRLSH copper conductor cable single core multi starnded copper in and including PVC conduit medium grade and MS termunal boxes suitable for housing modular switches , sockets and regulators with all fittings and fixing materials including modular inner plate and cover plates of suitable modules and multistarnded FRLSH copper earth continuty conductor of size 1.5 sqmm and connecting to common earth dolly all as specified and directed for the following complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

One light/fan/exhaust fan point controlled by one 5 Amps one way switch.

One socket outlet 3 pin 5 Amps on sameborad with other switches.

One socket outlet 3 pin 5 Amps on independant board.

One light point controlled by two two way switches.

All as per item No 173 here in before but with cable 2.5 sqmm for one 5 pin 15 Amps socket outlet on independent board incl multistarnded insulated copper earth continuty conductor of size 2.5 sqmm and fixing materials green colour and connecting to common earth dolly complete all as specified and directed.

M & L for Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed FRLSH cable, including PVC insulated unsheathed multistranded copper conductor single core FRLSH cable as earth continuity conductor to common earth and connected to earth dolly with GI terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) for the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One Socket outlet three pin, 6 Amp, on the same board, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, complete all as specified and directed.

One Socket outlet three pin, 6 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit complete all as specified and directed.

One Bell/Buzzer point controlled by one push button with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit complete all as specified and directed.

Note for serial item No 180 to 183: 1. Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. 2. GI boxes shall be fixed flush in position with cement mortar (1:4) complete all as directed.

S&F Switch modular type single pole, one way, 6 Amp, one module, complete all as specified and directed.

S&F Switch modular type single pole one way, 16 Amp, one module, complete all as specified and directed.

S&F Bell push switch modular type single pole one way, 6 Amp, one module, complete all as specified and directed.

S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole one way, 6 Amp, two module, complete all as specified and directed.

S&F Socket outlet modular type multipurpose 2/3 pin single pole one way 6/16 Amp, two module, complete all as specified and directed.

S&F Fan regulator, modular type, 5 step, high speed, two module capacitive type suitable for BLDC fan complete all as specified and directed.

S& F in repair modular type switch piano flush type, 6 Amp 240 Volt, AC two way etc complete all as specified and directed .

S&F Modular telephone socket one module complete all as specified and directed.

S&F White cover plate with frame, 1/2 module complete all as specified and directed.

S&F Metal flush box 1/2 module complete all as specified and directed.

S&F Call bell ding dong type AC 230 V complete all as specified and directed.

S&F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

S&F Lamp holder PVC/polycarbonate type with back plate complete all as specified and directed.

S&F LED 5W Lamp, 6500K, base B-22 efficacy not less than 90 lumen/watt complete all as specified and directed.

S&F in replacement sub main wiring with three run (phase neutral and earth) of 6 sqmm PVC insulated and unsheathed copper conductor cable in and including min 25 mm dia non metalic rigid PVC conduit and accessories like tee, bend, socket and copper lugs etc complete including cutting chasing and grouting on any type of wall, making good to the disturbed surfaces with CM (1:6) complete all as specified and directed. Note- Three run of copper conductor cable with conduit and accessories shall be measured as unit length.

S&F in replacement sub main wiring with three run (phase neutral and earth) of 10 sqmm PVC insulated and unsheathed copper conductor cable in and including min 25 mm dia non metalic rigid PVC conduit and accessories like tee, bend, socket and copper lugs etc complete including cutting chasing and grouting on any type of wall, making good to the disturbed surfaces with CM (1:6) complete all as specified and directed. Note- Three run of copper conductor cable with conduit and accessories shall be measured as unit length.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 1.2 m, 20watt, T5, 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F wall mounted extruded Aluminium/polycarbonate integrated LED batten fixture with tube 0.6 m, 10watt, T5, 6500K,efficacy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor and inbuilt driver complete complete including making connection complete all as specified and directed.

S&F decorative wall light fixture made of polycarbonate suitable for retrofit 9W LED lamp(base B-22) complete with PC diffusor & including one 9W LED lamp(base B-22), 6500K, not less than 100 lumen/watt efficacy including making connection complete all as specified and directed.

S&F LED light fitting 9/10W bulkhead luminaires incluing LED light, driver, holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F LED street light fitting 25 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrossion resistant complete with IP 65/66 & IK 08 protection including fixing with suitable bolt and nuts complete with making connection complete all as specified and directed.

S & F in repalcement submain wiring with four run (3 phase neutral & earth) of 10sqmm PVC insulated and unsheathed copper conductor cable in and including min 32mm dia non metallic rigid PVC conduit and accessories like tee bend socket and copper lugs etc complete including cutting chasing and grouting on any type of wall, making good disturbed surfaces with CM(1:6) complete all as specified and directed. (Note:- 5 runs of copper cable with conduit and accessories shall be measured as unit length)

S & F 20 mm dia, rigid non metallic PVC concealed conduitmedium grade, 'ISI marked' including necessary cutting chases in wall, inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddles, pipe hooks etc for telephone socket, complete all as specified and directed.

S&F in replacement sheet metal encloser double door 04 way TPN suitable for 415Volt AC supply ISI marked complete with neutral and earth bus bar, made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.

S&F SPN Enclosure double door 4 way SPN 240 V ISI marked complete with earth link busbar complete made out of CRCA steel sheet factory made incluing balking plate for unused module comlete all as specifed and directed

S&F in replacement sheet metal encloser double door 08 way SPN suitable for 240Volt AC supply ISI marked complete with neutral and earth bus bar, made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.

S&F sheet metal encloser double door 12 way SPN 230V ISI marked IP 43 complete with neutral and earth link and bus bar complete made out of CRCA steel sheet Factory made complete all as specified and directed including taking down old DB complete all as specified and directed.

Supply and fixing factory made Loadline vertical type TPN DB 4 way double door, protection class IP 43 made out of CRCA sheet with 200 Amps rated copper busbar, neutral and earth link, blanking plates, locking arrangement and 63 Amps 4Pole MCCB as incomer complete all as specified and directed incl taking down old DB complete all as specified and directed.

Supply and fixing factory made Loadline vertical type TPN DB 8 way double door, protection class IP 43 made out of CRCA sheet with 200 Amps rated copper busbar, neutral and earth link, blanking plates, locking arrangement and 125 Amps 4Pole MCCB as incomer complete all as specified and directed incl taking down old DB complete all as specified and directed.

S&F MCB 6-32 Amp 240V SP 10 KA ‘B’ series complete all as specified and directed.

S&F MCB 40-63 Amp 240V SPN 10 KA ‘B’ series complete all as specified and directed.

S&F in repair RCBO for EARTH LEAKAGE, OVERLOAD & SHORT- CIRCUIT PROTECTION 230V 32A AC type 10kA Four pole 30mA ISI marked complete all as specified and directed.

S&F in repair Single pole and neutral enclosure 240 V with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED 100 watt light fitting, 6500K, efficacy not less than 100 lumen/watt, pressure die cast aluminium housing with toughened glass cover with IP66 protection complete inbuilt driver & accessories including fixing with GI/MS bracket made out of suitable size of light grade tube upto 1.2 mtr length cut to length, bent to shape with 02 sets of MS clamps made out of minimum 3 mm MS flat iron with suitable bolt and nuts complete with making connection. complete all as specified and directed.

Supply and installation, commissioning and testing of wall Mounting indoor type LT Panel board made of Polycarbonate ASTA CPRI approved OEM made main LT Panel embedded with PU gasket with conical top with thimble and cable entry boxes with cable glands included with pedestal/ frame grouted in PCC (1:2:4) type B-1 20mm graded stone aggregated. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES including MCCBs and indicator lamps which shall be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel shall be IP 65, IK 08, anti-acid & anti corrosive. Panel should covered from all sides with front and back lockable door and hinges complete with copper bus bar with heat shrinkable PVC sleeve, DMC insulators, TPN, three phase, 04 wire (In separate chamber), Internal Power & control wiring with suitable size PVC insulated FRLS single core multistranded copper wire cable and including panel painting The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assembled by OEM only. TYPE TEST & ROUTINE TEST REPORT to be submitted. The ASTA CPRI report shall have mention of following tests performed and passed out satisfactorily - Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The panel shall pass glow wire test 960 degrees Centigrade in accordance with 60695-2-11 [flame retardant and self-extinguishing] including as per following:- INCOMER: (i) MCCB 63 Amp, 4 pole 16 KA 415V Fixed thermal & magnetic release - 01 No (ii) Digital Volt meter 0-500V - 01 No (iii) Digital Amp meter 0-200A - 01 No (iv) Set of LED RYB type indicating lamps - 01 No (v) Copper Bus Bar 200Amp TPN OUTGOINGS: (i) MCB 63A TPN C Curve-02Nos(For DUs ) (ii) MCB 10A DP B Curve-01 No(For staircase lighting ) (iii) Provisional arrangement for energy meters with transparent acrylic sheet with separate locking arrangements-02 Nos

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

Taking down carefully red lights fixed on wall depositing the same to MES store and refixing after repair is carried out in the same position from where the lights are taken down complete all as specified and directed.

Taking down carefully existing unsv ceiling fans 1200mm/1400 mm sweep from site, rewinding the ceiling fans with super enamelled copper wire of existing guage, including replacement of nuts, bolts, split pin, rubber reel, capacitor 2.5mfd, & including painting the fans and hanging the ceiling fans after repair to its original position complete all as specified and directed.

S&F ceiling fan 1200mm sweep, 5 star BLDC, minimum speed 350 RPM, Min air delivery 210 CMM with service value 6.00 BEE , corrosion resistant high performance with powder-coated set of 3 blades, 100% copper motor, with set of 2 canopy, 1 down rod, 1 shackle assembly and accessories complete all as specified and directed

S&F Heavy duty metal body exahust fan of 300mm sweep ,240 volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall complete all as specified and directed

S&F Heavy duty plastic body ventilation fan of 250mm sweep ,240 volt, having RPM not less than 1200, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including grouting of bolts and making good to distubed wall complete all as specified and directed

S&F storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, flexible connection(set of two) etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete all as specified & directed

S & F insulated XLPE armoured heavy duty electric cable with aluminium conductor 1100 volts heavy grade cross sectional area 50 Sqmm 4 core complete all as specified & directed

Sub main wiring (with approved colour coding as per IS) with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade 2 number of runs 4 sqmm along with single core FRLSH PVC insulated flexible stranded copper conductor 4 sqmm, 1.1 KV grade for earthing including concelaed suitable size PVC conduits medium grade and accessories, complete all as specified & directed

M&L for Sand cushioning in trenches for cables including watering and consolidation complete all as specified & directed

Supply and laying unreinforced pre cast concrete cable cover class LV type 1 flat size 250x150x50 mm for cable protection complete all as specified & directed

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders