Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC ACCEPT | |
| 2 | L2₹11.9 L+₹868.12 (0.07%)Rejected-AOC | L2 | Rejected-AOC REJECT |
| Sl No | Description | Qty | Unit | D RAJENDRAN L2 | PNAT CONSTRUCTIONS L1 |
|---|---|---|---|---|---|
| 1.00 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete | 20 | m3 | 197.9 ₹3,958 | 196 ₹3,920 Lowest |
| 2.00 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification | 6 | m3 | 5,338.1 ₹32,028.6 | 5,337 ₹32,022 Lowest |
| 3.00 | Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122 | 27 | m2 | 1,045.76 ₹28,235.52 | 1,045 ₹28,215 Lowest |
| 4.00 | Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffenedwith welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II | 39 | m2 | 1,386 ₹54,054 | 1,385 ₹54,015 Lowest |
| 5.00 | Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffenedwith welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II` | 70 | m2 | 1,155 ₹80,850 | 1,154 ₹80,780 Lowest |
| 6.00 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitems of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. | 15 | m3 | 9,181.6 ₹1,37,724 | 9,181 ₹1,37,715 Lowest |
| 7.00 | Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification | 15 | qtl | 9,152.2 ₹1,37,283 | 9,152 ₹1,37,280 Lowest |
| 8.00 | Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement. Complete direction as per the departmental officers | 9 | m3 | 37 ₹333 Lowest | 37 ₹333 Lowest |
| 9.00 | Filling with well gravel (other than sand) complying with standard specification for filling in foundation and basement. Complete direction as per the departmental officers | 8 | m3 | 288.7 ₹2,309.6 | 286 ₹2,288 Lowest |
| 10.00 | Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification | 2 | m3 | 6,680.9 ₹13,361.8 | 6,679 ₹13,358 Lowest |
Tender Value
₹14.5 L
EMD Value
₹14,500
Closing Date
5 May 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner, Coimbatore Corporation
Coimbatore Corporation, Main Office, Big bazaar street, Town hall, Coimbatore-1
Construction of Library Building at Periyar Nagar in ward no 07 East Zone
2025_MAWS_550038_9
e19/2025
Open Tender
Civil Works
Works
150 days
Coimbatore corporation-
AS PER TENDER DOCUMENT
4 documents required · 4 mandatory
₹0
₹14,500
8 Aug 2025
23 Apr 2025
6 May 2025
23 Apr 2025
5 May 2025
23 Apr 2025
Amount
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete
Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122
Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffenedwith welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II
Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffenedwith welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II`
Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCCitems of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.
Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification
Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement. Complete direction as per the departmental officers
Filling with well gravel (other than sand) complying with standard specification for filling in foundation and basement. Complete direction as per the departmental officers
Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
Suppling and Fixing of MS angles and grills complete direction as per the departmental officers
Suppling and Fixing of Galvolume sheets complete direction as per the departmental officers
Flyash Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.
Providing weathering course etc,complete as per standard specifications (S.I.306)
Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification
.Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete.
Dadoing the wall with colour glazed cement mortor 1:3 mix complete as per the departmental officers
Providing ceramic tile flooring using CM 1:3 mix of apparoved colour complete direction as per the departmental officers
Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatlyand fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification complete direction as per the departmental officers
Supply and laying of Rubber mould hydraulic pressed paver blocks complete direction as per the departmental officers
Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar including cost and onveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
Plastering with cement mortar (1:3) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
Plastering with cement mortar (1:3) 20mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)
Supply and fixing of RCC Rings complete direction as per the departmental officers
Supply and fixing of RCC Cover complete direction as per the departmental officers
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Painting two coats of Enamel Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.
Supplying and fixing of 1000litr HDPE tank complete direction as per the departmental officers
Supplying and fixing of 1HP Motor complete direction as per the departmental officers
Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) SD- 16
Wiring with 2x1.5sq.mm PVC insulated unsheathed Conductor of 1100Vgrade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3pin non inter locking CS plug with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for opening PVC plug point
Wiring with 2x1.5sq.mm PVC insulated unsheathed Conductor of 1100Vgrade in suitable PVC Rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x113xx TW switch in flush with wall with 3mm thick hylem sheet cover for 15A 3pin flush type non inter locking CS plug with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for open PVC power plug point
Supply and fixing of box type 4' 40W flourescent tube wiring complete with copper choke and condenser with TW round blocks on wall or ceiling with flurescent tube with PVC un sheathed copper leads from terminals to the fitting
Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300W regulator with 300mm down rod on the existing clamp
Supply and fixing of WT bulk head fittings with guard suitable for 100W bulb
Supply and fixing of 40w LED Light fitting complete direction as per the departmental officrs
D RAJENDRAN (BID ID -1329776)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .