Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.0 LAccepted-AOC 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹60.5 L+₹7.2 L (13.6%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹62.2 L+₹9.0 L (16.9%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹70.1 L+₹16.8 L (31.6%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹72.8 L+₹19.6 L (36.8%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹94 L
EMD Value
₹1.9 L
Closing Date
6 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8925 REPAIR MAINT TO ANTI CARBONATION PAINTING AT CG DOCK AND CONNECTED AREA AND REPAIR REPLACEMENT OF PCC HARD STANDING INTERLOCKING TILES AND PAINTINGS WORK AT VARIOUS JETTY AREA AT NAVAL DOCKYARD UNDER AGE BR I NW KUNJALI UNDER GE NW KUNJALI
2023_MES_588673_1
8925/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
Please refer tender document
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.9 L
Yes
21 Oct 2023
8 Apr 2023
8 May 2023
15 Apr 2023
6 May 2023
22 Apr 2023
8 Apr 2023 - 15 Apr 2023
Amount
Taking down cement plaster on brick surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent around edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately)
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface all as specified and directed. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over a coat of primer DEKGUARD of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Supply only ready mix microconcrete mixture. Make : Dr.Fixit/Sunanda/chemestik/Fosrok
S&F welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight per Sqm nexc. 4 Kg.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal.
M&L for 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 13 above but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 in field using minimum 375 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc all as specified and directed.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified. (Reinforcement shall be measured and paid separately as directed by EIC)
Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).
M&L for preparation of newly plastered surfaces of wall, applying two coats of Oil emulsion distemper over a coat wall care putty of 3mm thick and alkali resistant primer all as specifed and directed.
M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil emulsion distemper over a coat of wall primer all as specifed and directed.
M&L for preparation of newly plastered surfaces in ceiling, applying three coats of white wash all as specified and directed.
Material & labour for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Fosroc/Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm width or girth applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instructions
M&L for complete removal of existing plastered wall surface, over 10cm width or girth preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instructions.
M&L for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed Make : Pidilite / Fosroc / Chemistic or equivalent
M&L for applying thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and all as specified and as directed.
M&L for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of epoxy paints over a coat of red oxide primer complete all as specified and directed.
Removal of excavated material and demolised concrete to a distance exc. 25 Km & depositing where directed. Each load not less than 6 Cum.
M&L for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint or equivalant as approved by GE). All as specified and directed.
Dismantling wrought or mild steel work of any description.
Material & labour for Stainless steel ladder, railings, plate, chain etc in staircase, landing etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE. Grade of steel shall be grade 316.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness all as specified and directed.
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
M&L for in repairs Plain, black, mild steel sheeting, 1.50 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)
M&l for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
M & L for cement concrete type B0, 1:2:4 (Using 20 mm graded stone aggregate) in roof, floor with water proofing compound by weight of 3 % of total cement content complete all as specified and directed by Engr-in-charge (WPC shall be measured and paid seperately).
Material & labour for rendering minimum 20mm thick cement plaster in CM (1:3) on roof top surface finished even and smooth including WPC by weight of 3% of total cement content, priming @ 0.8 kg/Sqm of finished concrete surface complete and evenly applying a coat of cold bituminous at 1 Kg/Sqm and applying seating cloth over cold bituminous, finally paving bitumen of any penetration at 1.5 kg/Sqm complete all as specified and directed. Note :- WPC will be measured and paid seperately.
M & L for cement concrete type B0, 1:2:4 (Using 12.5 mm graded stone aggregate) in floor kerbs of mud stops, rounded or chamfered on edges.
Supply only Integral waterproofing compound in liquid form . All as specified and directed. (Make: Dr Fixit or equivalent)
MADHU ENTERPRIZES
jalandhara construction
Nilesh Construction
Shree Ayyappa Engineering
M/s S.D Construction Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .