Loading…
Loading…
Tender Value
₹36.3 L
EMD Value
₹36,304
Closing Date
6 Apr 2026, 3:00 pmClosed
Superintending Engineer, TGMSIDC West Circle, Hyd
In the Premises of Government District Hospital King Koti, Hyderabad
Construction of 50 bedded Critical Care Hospital Block at District Hospital Medak in Medak District. Sub-Work: Providing Medical Gas Pipe Line System
688479
12-26/SE/TGMSIDC/West Cir-Hyd/2025-26/386, Dt:07.03.2026
OPEN
Other
MEDAK
13 documents required · 13 mandatory
₹1,286
₹36,304
24 Mar 2026
24 Mar 2026
24 Mar 2026
2 x 10 Oxygen Main Manifold with 19 mm O.D x12 mm ID Copper Pipe mounted on Top Frame with brass blocks,NRVs/Cylinder Valves and Pigtail Pipes of 1 mtr long of size 8 mm O.D x 3 mm I.D,duly tested at 250 Kg/Cm2 pressure. & Fully Automatic Control Panel for Oxygen.
2 x 2 Oxygen Emergency Manifold with 19 mm O.D x12 mm ID Copper Pipe mounted on Top Frame with brass blocks, NRVs/Cylinder Valves and Pigtail Pipes of 1 mtr long of size 8 mm O.D x 3 mm I.D, duly tested at 250 Kg/Cm2 pressure with Single stage high flow / double stage Regulator.
Supply and fixing of Medical grade Copper Pipe Lines of 12 mm dia. 0.7 mm thick for distribution, pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipeconforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufactureres test certificate for the physical properties & chemical composition. Copper pipe should also have third party inspection certificate from Lloyds' Register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work 12mm O.D x 0.7 mm thick copper pipe
Supply and fixing of Medical grade Copper Pipe Lines of 15 mm dia. 0.9 mm thick for distribution, pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipeconforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufactureres test certificate for the physical properties & chemical composition. Copper pipe should also have third party inspection certificate from Lloyds' Register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work. 15mm O.D x 0.90mm thick copper pipe
Supply and fixing of Medical grade Copper Pipe Lines of 22 mm dia. 0.9 mm thick for distribution, pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipeconforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufactureres test certificate for the physical properties & chemical composition. Copper pipe should also have third party inspection certificate from Lloyds' Register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work 22mm O.D x 0.90mm thick copper pipe
Supply and fixing of Medical grade Copper Pipe Lines of 28 mm dia. 0.9 mm thick for distribution, pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipeconforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufactureres test certificate for the physical properties & chemical composition. Copper pipe should also have third party inspection certificate from Lloyds' Register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work. 28mm O.D x 0.90mm thick copper pipe
Supply and fixing of Medical grade Copper Pipe Lines of 42 mm dia. 1.2mm thick for distribution, pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipeconforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufactureres test certificate for the physical properties & chemical composition. Copper pipe should also have third party inspection certificate from Lloyds' Register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work. 42mm O.D x 1.2mm thick copper pipe
Oxygen outlets (Indeginous) with Probes as per DIN standards.
Supply and fixing of BPC Flow meter with Humidifier bottle and probe near out let point, flow meter body made of brass material and should be back pressure compensated suitable for accurate gas flow measurement and control within a range of 0-15 litres per minute, flow tube and components should be mae of clear impact resistant polycarbonate and Humidifier shuld have built in safety valve and should be made of unbreakable polycarbonate material and autoclavable at 134 degrees centigrade, including cost and conveyance of materials, errection chages, commissioning charges etc. for finished item of work
Supply and fixing of 15 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum/Oxygen, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work. 15 mm Valves
Supply and fixing of 22 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum/Oxygen, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work. 22 mm Valves
Supply and fixing of 28 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum/Oxygen, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work. 28 mm Valves
Supply and fixing of 42mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum/Oxygen, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work. 42 mm Valves
Vacuum outlets (Indeginous) - with Probes as per DIN standards
Medical Air outlets (Indeginous) - with Probes as per DIN standards
Ward Vacuum Unit complete with Regulator, collection bottle, Adapter and Bracket for collection bottle.
Compressed Air System Consisting of 1 no (Reciprocating & oil free), 5 HP Motor with 30.00 cfm capacity at 8.5Kg/cm2 pressure with common receiver of Capacity 220 ltrs, common Air drier, Pressure Reducing Unit etc., 3-Stage Breathing Air Filter for 125 CFM as per ISO 8573-1
Suitable Electric Panel Boards for Medical Air Compresssor system and Vaccum pump system with Laying of 150mm Sq mm 3.5 core Electrical Cabeling (Approx Cable- 100 mtrs)
2 nos. of Ingersoll Rand make Model 7.50 V x 7 Model with 7.50 HP Motor with 1000 litres Receiver, Filters, Electricals etc. Secretion Trap and bacteria filter.
3 Gas Microprocessor Controlled Alarm With Digital Display
Valve Box - 3 Gas Service (size 15mm X 15 mm X 22mm) with NIST Connection & S.S.Valve for O2
High Pressure tube imported
Low Pressure Tube
Bed Head Panel : The bed Head Panel should have provision for Medical Gas outlet points as per requirement and Nurse call systems.it should be equpped with electrical switch, socket of 16 Amp, socket for 2+2
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.xls
TENDER_DOCUMENT • 0.04 MB
Tender Document TG.doc
TENDER_DOCUMENT • 0.66 MB
Download all tender documents and submit your bid