Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹13.6 L
EMD Value
₹27,180
Closing Date
12 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Civil Works required for provisioning of Punching machines at Material Gate and renovation of Factory entrance Security Gate at HAL Factory Lucknow
7045
HAL-AD/9904/4594/CE/2024/
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹27,180
12 May 2024
23 Apr 2024
23 Apr 2024
12 May 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]
EMD of Rs.27180.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Description of Items
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge for all kinds of soil.
Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto a lead of 150 Mtr and lift upto 1.5m or part there of, with labour, T&P etc all complete as per direction of EIC.
Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8, 40 mm size graded stone aggregate) in foundation, under floors or any other similar description of works, with mechanical mixing including necessary form work / shuttering , compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.
Providing & laying cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in floor, approach roads, description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC
Providing, fabricating, fixing and removing, Form work / shuttering, Centering including strutting, propping etc. and removal of form work of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden including all braces, struts, balli, etc, including working scaffoldings, ladders, wastage labour, material, T&P, transportation,etc. all complete as per specification and direction of E.I.C.
Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in sub -structure upto plinth beam e.g. column fooling, plinthbeam, floor, pavement, drain or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction oints / grooves, if required with all labour, material, T&P etc all complete as per direction of EIC
Providing and laying Deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL / SAIL / TISCON / Gallent or equivalent as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, T&P, wastage etc. all complete at any height as per drawing, specification and direction of E.I.C.
Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.
Providing, Fabricating & fixing of MS Roof Truss (framed), trusses, purlins, crain, gantries, rails & fastnings and heavy bracket framing (beam, Tee, angle, channel, tubular , rectangular, square, flat, Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete etc all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.
Providing and laying matt finished vitrified tile of size 300x300mm, thickness 9.8mm or as per manufactureer, having with water absorption less than 0.5% and conforming to IS: 15622 of approved make Johnson/ Kajaria/ Nitco or as approved by EIC, in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
Providing and laying factory made chamfered edge Cement Concrete paver blocks 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge.
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
Providing & fixing at all heights, levels and locations colour finish 0.56 mm thick Aluminium alloy roofing sheets of make TATA/ Bhusan etc or as approved by EIC, of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).
Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge.
Preparation of surface with applying average 1mm thick approximately wall putty of make Birla/ Asian/ Burger as approved, before applying painting on wall including sand papering for smoothing of surface to achive even surface with all labour material T&P etc.all complete as per specification all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour, preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge.
Providing & applying two coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including one coat of exterior primer , preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. New Work (Two or more coats applied @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/10 Sqm
Providing and applying One or more coat of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger of approved tint and shade over a coat of suitable primer for respective surface primer of above brand ,including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching, removal of all splashes and cleaning glass and joinery, use of scaffolding including labour material T&P, wastage etc all complete as per specification & direction of EIC.
Demolishing cement concrete / Kota stone / RCC / PCC works manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres leadncluding labour material T&P, wastage etc all complete as per specification & direction of EIC.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead including labour material T&P, wastage etc all complete as per specification & direction of EIC.
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Disposal of dismantled material like Lime, moorum, building rubbish, brick, concrete, MS parts etc By Mechanical Transport including loading,unloading and stacking upto 2.0 km distance all complete as per specification & direction of EIC.
Above
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.10 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 1.08 MB
PQ.xlsx
TENDER_DOCUMENT • 0.02 MB
BOQ2.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .