Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹28.5 L+₹71,077 (2.55%)Rejected-Finance | L2 | Rejected-Finance Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
11 Jun 2022, 6:00 pmClosed
GE Faridkot
GE Faridkot Military Station
Repair /replacement of misc furniture and TP furniture including recanning of chairs at Faridkot Mil Stn
2022_MES_523747_1
GE FRD-17/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE Faridkot
Class D Category d i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹80,000
Yes
30 Jun 2022
12 May 2022
13 Jun 2022
12 May 2022
11 Jun 2022
28 May 2022
Amount
ALMIRAH MESS UTENSIL FD-93(M)
Removing existing unserviceable top and S&F new top of 18 mm thick block board, one side covered with 1 mm thick teak shade plastic laminated sheet all as specified and shown on drawing.
Removing existing unserviceable front shutter and S&F new shutter of 18 mm thick block board, one side teak faced complete all as specified and shown on drawing.
Removing existing unserviceable base bottom and S&F new base bottom of Ist class seasoned hard wood ,fixed with screws complete all as specifed and shown on drawing.
Removing existing unserviceable back side and S&F new back side of 6mm thick plywood, commercial, BWR complete all as specifed and shown on drawing.
Removing existing unserviceable both sides and S&F new both sides of 18 mm thick block board, one side teak faced all as specified and shown on drawing.
Removing existing unserviceable handle and S&F new aluminum anodized handle,100mm long as specified and shown on drawing.
Removing existing unserviceable hasp & staple and S&F new hasp & staple as per existing as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
BED HARD STEEL : FD/E6/MAP/08(R)
Taking out old unserviceable plywood of top and S&F new top of 12mm thick plywood BWR, commercial of size 1974mm x 824mm, fixed with screw wood steel all as specified and shown on drawing.
Taking out old unserviceable foot board and S&F new foot board of 18 mm thick pre- laminated particle board, both sides decorative of size 650mm x 300 mm complete all as specified and shown on drawing
Taking out old unserviceable head board and S&F new head board of 18 mm thick pre- laminated particle board, both sides decorative of size 650mm x 200 mm complete all as specified and shown on drawing
Removing old unserviceable shoe and S&F new PVC rubber shoe of size 38mm at bottom of the leg complete all as specified and shown on drawing.
Taking out old unserviceable middle support and S&F new middle support made out of 25 mm x25 mm MS square pipe (18 gauge) having length 824 mm complete all as specified and directed .
Gas welding of broken spot of 25mm dia pipe complete all as specified and directed . Note:-Welding alround shall be consider as one point.
M&L for denting & painting of steel surfaces, exposed to view when placed in position and applying two coats of synthetic enamel black paint after preparation of old surfaces complete all as specified and shown drawing .
BENCH WORK SHOP : FD- 145 (M)
Removing old unserviceable top plank and S&F 40mm thick new top plank of 1st class seasoned hard wood of size 1900mm x250mm complete all as specified and shown on drawing.
Removing old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Removing old unserviceable short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Removing old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and shown on drawing.
Removing old unserviceable side stiffener and S&F new side stiffener of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Removing old unserviceable centre stiffener and S&F new centre stiffener of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Removing old unserviceable drawer and S&F new drawer of 1st class seasoned hard wood complete all as specified and as shown on drawing.
Removing existing unserviceable handle and S&F new mild steel powder coated handle,100 mm long for drawer complete all as specified and directed .
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
BENCH WORK STEEL ; FD- 1024
Removing old unserviceable top plank and S&F 40mm thick new top plank of 1st class seasoned hard wood of size 1800mm x900mm complete all as specified and shown on drawing.
Removing old unserviceable long rail and S&F new long rail of MS pipe 32 mm x1.6 thick complete all as specified and shown on drawing.
Removing old unserviceable short rail and S&F new short rail of MS pipe 32 mm x1.6 thick complete all as specified and shown on drawing.
Removing old unserviceable legs and S&F new legs of MS pipe 32 mmx1.6 thick complete all as specified and shown on drawing.
Removing old unserviceable side stiffener and S&F new side stiffener of MS pipe 32 mm x 1.6 thick complete all as specified and shown on drawing.
Removing old unserviceable centre stiffener and S&F new centre stiffener of MS pipe 32 mm x 1.6 thick complete all as specified and shown on drawing.
Removing old unserviceable drawer and S&F new drawer of MS sheet 1.00mm thick complete all as specified and shown on drawing.
Gas/Electric welding of broken spot of 32mm dia pipe complete all as specified and directed . Note:-Welding allround shall be consider as one point.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
M&L for preparation of old painted surfaces of bench work steel and applying one coat of synthetic enamel paint (black colour) complete all as specified and directed .
BOARD NOTICE 900 x600mm (FD-1042)
Dismantling old unserviceable board from back of green baize cloth and S&F new 6mm thick MDF board, superior quality complete all as specified and as shown on drawing.
Dismantling old unserviceable aluminium channel and S&F new aluminium channel, made out of aluminium flat 63 mm x 3.25 and of section 22 mm x 10 mm complete all as specified and shown on drawing.
Dismantling old unserviceable green baize cloth and S&F new green baize cloth of superior quality complete all as specified and as shown on drawing.
Dismantling old unserviceable sheet glass and S&F new 4mm thick sheet glass, superior quality with stainless steel ruller for sliding of glass complete all as specified and as shown on drawing.
Dismantling unserviceable frame and S&F new frame of 1st class seasoned hard wood of section 35 mm x 40 mm and of size 900 mm x 600 mm complete all as specified and shown on drawing .
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
BOARD NOTICE (FD-99)
Dismantling unserviceable back plywood and S&F new 6mm thick plywood , commercial, BWR grade of size 2400mm x1200 mm on back of frame alongwith 2 nos key plates complete all as specified and shown on drawing.
Dismantling old unserviceable board from back of green baize cloth and S&F new 12mm thick MDF board, superior quality of size 2400mm x1200 mm complete all as specified and as shown on drawing.
Dismantling old unserviceable green baize cloth and S&F new green baize cloth of superior quality complete all as specified and as shown on drawing.
Dismantling unserviceable frame and S&F new frame of 1st class seasoned hard wood of section 35 mm x 40 mm and of size 2400mm x1200 mm complete all as specified and shown on drawing .
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
Bin Solid Linen Multipurpose FD/E6/MAP/09
Removing old unserviceable existing top and S&F new top made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing old unserviceable existing shutter and S&F new shutter made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing old unserviceable existing sides and S&F new sides made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing old unserviceable existing back of drawer and S & F new back of drawer made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing old unserviceable existing front of drawer and S & F new front of drawer made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing..
Removing old unserviceable existing shelf of drawer and S & F new shelf of drawer made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing old unserviceable existing back and S & F new back made of 12 mm plywood BWR, commercial complete all as specified and shown on drawing.
Removing old unserviceable hinges and S&F new oxidized piano type hinges, conforming to IS-3818, fixed with steel screw 15 mm long of side board complete all as specified and shown on drawing.
Removing existing unserviceable handle and S&F new mild steel powder coated handle, 100 mm long, for shutter & drawer complete all as specified and shown on drawing.
Removing existing unserviceable ball catcher and S&F new magnetic catcher fixed on top and bottom edge of the shutter of side board complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
CHAIR EASY FD-17 (M), FD-229
Dismantling existing unserviceable rear leg and S & F new rear leg of 1st class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable front leg and S & F new front leg of 1st class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable side rail of seat and S & F new side rail of seat of Ist class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable front rail of seat and S & F new front rail of seat of Ist class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable back rail of seat and S & F new back rail of seat of Ist class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable arm handle and S & F new arm handle of Ist class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable bottom rail of back and S & F new bottom rail of back of Ist class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable side rail of back and S & F new side rail of back of Ist class seasoned hard wood complete all as specified and as shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
CHAIR WRITING FD-20 M, FD-250, FD-261, FD-280
Dismantling existing unserviceable rear leg and S&F rear leg of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable front leg and S&F front leg of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable arm rest and S&F arm rest of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable front rail and S&F front rail of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable back rail and S&F back rail of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable side stiffener and S&F side stiffener of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable center stiffener and S&F center stiffener of Ist class seasoned hard wood complete all as specified and shown on drawings.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
CHAIR WOODEN BOTTOM FD-56 M, FD-225 & FD-285:-
Dismantling of existing unservceable rear leg and S&F new rear leg of 1st class seasoned hard wood all as specified and shown on drawings.
Dismantling of existing unservceable front leg and S&F new front leg of 1st class seasoned hard wood all as specified and shown on drawings.
Dismantling of existing unservceable side rail and S&F new side rail of 1st class seasoned hard wood all as specified and shown on drawings.
Dismantling of existing unservceable front rail and S&F new front rail of 1st class seasoned hard wood all as specified and shown on drawings.
Dismantling of existing unservceable back rail of seat and S&F new back rail of seat of 1st class seasoned hard wood all as specified and shown on drawings.
Dismantling existing unserviceable side stiffener and S&F side stiffener of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable center stiffener and S&F center stiffener of Ist class seasoned hard wood complete all as specified and shown on drawings.
Dismantling existing unserviceable seat and S&F seat of 6 mm thick plywood, commercial BWR quality complete all as specified and shown on drawings.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
CHAIR CB 'A' SPECIAL WITH HAND REST : FD-120
Removing old unserviceable right side front/ rear leg and S&F new right side front/ rear leg, made out of 19mm square MS tube of wall thickness 1.6mm and having 685 mm length complete all as specified and shown on drawing.
Removing old unserviceable left side front/ rear leg and S&F new left side front/ rear leg, made out of 19mm square MS tube of wall thickness 1.6mm and having 450 mm length complete all as specified and shown on drawing.
Removing old unserviceable stifferner seat/back and S&F new stiffener of seat/back made of 19mm square MS tube of wall thickness 1.6mm complete all as specified and shown on drawing.
Removing old unserviceable frame of seat and S&F new frame of seat, made of 1st class seasoned hard wood ,55 mm x 20 mm thick, woven with 2mm wide plastic cane in true godrej pattern complete all as specified and shown on drawing.
Removing old unserviceable frame of back and S&F new frame of back, made of 1st class seasoned hard wood, 55 mm x 20 mm thick, woven with 2mm wide plastic cane in true godrej pattern complete all as specified and shown on drawing.
Removing old unserviceable hand rest and S&F new hand rest made of 1st class seasoned hard wood, 575mm x 12 mm thick complete all as specified and shown on drawing.
Removing old unserviceable shoe and S&F new PVC /Hard rubber shoe at bottom of the leg complete all as specified and shown on drawing.
Gas welding of broken spot of 19mm square tube complete all as specified and directed . Note:-Welding allround shall be consider as one point.
M&L for denting & painting of steel surfaces, exposed to view when placed in position and applying two coats of synthetic enamel black paint after preparation of old surfaces complete all as specified and shown drawing .
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
DESK STEEL : FD-1021
Removing old unserviceable top box and S&F new top box of size 100mm front & 200 mm rear x 1220mm long x530mm width with 19 thick prelaminated particle board one side natural teak faced and other side commercial including 4mm thick teak wood beading fixed with front of the top complete all as specified shown on drawing
Removing old unserviceable leg and S&F new leg "U" shape made out of 25mm dia MS tube with 1.6mm wall thickness of length 1960 mm complete all as specified and as shown on drawings.
Removing old unserviceable foot rest and S&F new foot rest made out of 25mm dia MS tube with wall thickness 1.6mm and 1220mm long complete all as specified and as shown on drawings.
Removing old unserviceable side rail and S&F new side rail of 25mm dia MS tube with 1.6mm wall thickness complete all as specified and as shown on drawings.
Removing old unserviceable bearer and S&F new bearer made out of 25mm dia MS tube with wall thickness 1.6mm and 1220mm long complete all as specified and as shown on drawings.
Gas welding of broken spot of 25mm dia tube complete all as specified and directed . Note:-Welding allround shall be consider as one point.
M&L for Preparation of old painted steel surfaces and applying one coat of synthetic enamel white paint complete all as specified and directed.
MIRROR DRESSING (GENTS): FD/E6/MAP/16:-
Dismantling existing old unserviceable ply from back and S & F new 12 mm thick plywood of size 1200mm X 600mm ,commercial, BWR quality complete all as specified and as shown on drawing.
Removing of existing cracked/ broken looking mirror and S&F new looking mirror of size 1200 x 600 mm x 5.5mm thick complete all as specified and as shown on drawing.
Dismantling unserviceable frame and S&F new frame of 1st class seasoned hard wood of section 50 mm x 28 mm and of size 1200 mm x 600 mm complete all as specified and shown on drawing .
Removing existing cracked/ broken glass shelves and S&F new glass shelves of size 100mm x 600mm x 5.5mm thick complete all as specified and as shown on drawing.
Removing old unserviceable piano type hinges and S & F new oxidized piano type hinges conforming to IS-3818, fixed with steel screw complete all as specified and directed and as shown on drawing.
Dismantling existing unserviceable leg and S & F new leg of 1st class seasoned hard wood of section 38 mm x38mm & 450mm long and top side bracket cut of size 38 mm x112mm x112mm complete all as specified and directed and as shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
RECANNING OF WOODEN CHAIRS (EXCEPT CHAIR VERANDAH) :-Removing of old existing unserviceable cane and M&L for re-canning of all type of chair with 0.4mm thick & 2.00mm wide plastic cane, (white/yellow in colour) all round for seat & back and border canning with 3.00mm wide plastic cane complete all as specified and shown on drawings.
HAT STAND WITH MIRROR (FD-233 & FD-23 (M)
Dismantling old unserviceable back plywood and S&F new 6 mm thick plywood, commercial, BWR grade, on back of frame & providing 2 nos key plate all as specified and shown of drawing.
Dismantling old unserviceable plywood with edging from front of hat stand and S & F new 3.5 mm thick plywood, BWR grade with teak faced including providing new teakwood edging around the frame complete all as specified and shown of drawing.
Removing old unserviceable looking mirror and S& F new 5.5 mm thick looking mirror of size 300x440 mm with half round beading all as specified and shown on drawing.
S&F new brass peg hook after removing unservieable peg hook as specified and shown on drawing.
TABLE 900X600X760MM WITH/WITHOUT DRAWER FD-224,FD-283 & FD-284
Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook, of size 900x600mm including providing 4mm thick teak wood beading alround the top complete all as sepecifed and shown on drawings.
Dismantling existing unserviceable long top rail and S&F new long top rail of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Dismantling existing unserviceable small top rail and S&F new small top rail of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Dismantling existing unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Dismantling existing unserviceable side stiffener and S&F new side stiffener of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Dismantling existing unserviceable centre stiffener and S&F new centre stiffener of 1st class seasoned hard wood complete all as specified and as shown on drawings.
Dismantling existing unserviceable drawer and S&F new drawer of 1st class seasoned hard wood complete all as specified and as shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TABLE 900MMX900MMX760MM FD-291
Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook, of size 900x900mm including providing 4mm thick teak wood beading alround the top complete all as sepecifed and shown on drawing.
Dismantling existing unserviceable long top rail and S&F new long top rail of 1st class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and as shown on drawing.
Dismantling existing unserviceable stiffener and S&F new stiffener of 1st class seasoned hard wood ,fixed with dovetail joint complete all as specified and as shown on drawing.
Dismantling existing unserviceable corner bracket and S&F new corner bracket of 1st class seasoned hard wood,made to shape at top of leg & frame, fixed with screws complete all as specified and as shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TABLE BED SIDE FD-276 & FD-248
Dismantling existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wook of existing size including providing 4mm thick teak wood beading alround the top complete all as sepecifed and shown on drawing.
Dismantling existing unserviceable sides and S&F new sides of 12 mm thick plywood,BWR grade, one side teak faced as specified and shown on drawings.
Dismantling existing unserviceable bottom and S&F new bottom of 12 mm thick plywood,BWR grade, commercial as specified and shown on drawings.
Dismantling existing unserviceable back and S&F new back of 6 mm thick plywood,BWR grade, commercial as specified and shown on drawings.
Dismantling existing unserviceable shelves and S&F new shelves of 12 mm thick plywood,BWR grade, commercial as specified and shown on drawings.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TABLE COMPUTER ;FD/E6/MAP/03
Removing existing unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak wood of existing size including providing 4mm thick teak wood beading allround the top complete all as sepecifed and shown on drawing.
Removing existing unserviceable base and S&F new base of 18mm thick prelaminated particle board, one side natural teak wood of existing size including providing 4mm thick teak wood beading alround the base complete all as sepecified and shown on drawing.
Removing existing unserviceable drawer and S&F new drawer made of 18 mm pre-laminated particle board , exterior grade and fixed on telescopic channels complete all as specified and shown on drawing.
Removing unserviceable existing key board tray and S&F new key board tray made of 18 mm pre-laminated particle board, exterior grade and fixed on telescopic complete all as specified and shown on drawing.
Removing existing unserviceable pull out tray and S&F new pull out tray made of 18 mm pre-laminated particle board, exterior grade and fixed on telescopic complete all as specified and shown on drawing.
Dismantling existing unserviceable bottom shelf and S&F new bottom shelf of 18mm thick prelaminated particle board, one side natural teak wook of existing size including providing 4mm thick teak wood beading alround complete all as sepecified and shown on drawing.
Removing existing unserviceable vertical side and S&F new vertical side of 18mm thick prelaminated particle board fixed with MS frame, one side natural teak wook of existing size including providing 4mm thick teak wood beading allround complete all as sepecified and shown on drawing.
Removing existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg complete all as specified and shown on drawing.
Removing existing unserviceable knob and S&F new aluminium anodized knob of 25mm dia with nut & washer complete all as specified and shown on drawing.
M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint (black colour) complete all as specified and directed .
Table writing (FD-275)
Dismantling old unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced and other side balancing white, of size1145x600mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable side stiffener and S&F new side stiffener of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable center stiffener and S&F new center stiffener of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling existing unserviceable drawer and S&F new drawer of 1st class seasoned hard wood with knob 25mm dia complete all as specified and shown on drawing .
Dismantling old unserviceable shutter and S&F new shutter of 18mm thick prelaminated particle board, one side natural teak face and other side balancing white with piano hinges, knob 25mm dia and lock with duplicate key as specified and shown on drawing .
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
Table Dining 1200mmx900mmx760mm (FD/MAP-II/03)
Dismantling old unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1200x900mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable stiffener and S&F new stiffener of 1st class seasoned hard wood ,fixed with dovetail joint complete all as specified and shown on drawing.
Dismantling old unserviceable corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
Table Dining 6 Persons (FD-273) ,(FD/MAP-II/03)
Dismantling old unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1500x900mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable stiffener and S&F new stiffener of 1st class seasoned hard wood ,fixed with dovetail joint complete all as specified and shown on drawing.
Dismantling old unserviceable corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
Table Dining 8 Persons (FD-273) ,(FD/MAP-II/03)
Dismantling old unserviceable top and S&F new top of 18mm thick prelaminated particle board, one side natural teak faced, of size1800x900mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling old unserviceable long rail and S&F new long rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable short rail and S&F new short rail of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable legs and S&F new legs of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable stiffener and S&F new stiffener of 1st class seasoned hard wood complete all as specified and shown on drawing.
Dismantling old unserviceable corner bracket and S&F corner bracket of 1st class seasoned hard wood, made to shape at top of leg & frame fixed with screws complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TV Trolley (FD/ E6/MAP/04(R)
Removing unserviceable existing top and S&F new top made of 18 mm pre-laminated particle board, exterior grade including standard PVC edging alround complete all as specified and shown on drawing.
Removing unserviceable existing base and S&F new base made of 18 mm pre-laminated particle board, exterior grade including standard PVC edging alround complete all as specified and shown on drawing.
Removing unserviceable existing sides and S&F new sides made of 18 mm pre-laminated particle board, exterior grade complete all as specified and shown on drawing.
Removing unserviceable existing glass of shutter & stainless steel channel and S&F 5.5mm thick glass & stainless steel channel duly screwed alongwith handle and magnetic catcher complete all as specified and shown on drawing.
Removing old unserviceable existing castor wheel and S&F new 50mm dia swivel type castor wheel on bottom of trolley complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TABLE DRESSING GENTS WITH MIRROR (FD-230,FD-379 AND FD-32(M)
Dismantling old unserviceable top of drawer and S&F new top of 12mm thick plywood,BWR grade, of size900x300mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling old unserviceable bottom of drawer and S&F new bottom of 12mm thick plywood,BWR grade, of size900x300mm including 4mm thick teakwood beading alround complete all as specified and shown on drawing .
Dismantling existing old unserviceable ply from back of mirror and S & F of new 6mm thick plywood, commercial, BWR quality, to mirror frame complete all as specified and as shown on drawings.
Removing existing unserviceable looking mirror and S&F new 5mm thick, looking mirror of size 366x480 mm complete all as specified and as shown on drawings.
Removing existing unserviceable looking mirror and S&F new 5mm thick, looking mirror of size 380x760 mm complete all as specified and as shown on drawings.
Dismantling unserviceable frame of looking mirror and S&F new frame of 1st class seasoned hard wood,of section 20mm x 25mm ,made to shape including beading at back, of 1st class seasoned hard wood complete all as specified and as shown on drawings.
S&F 3mm thick flat iron key plates fixed on the top of mirror duly painted with black paint complete all as specified and as shown on drawings.
Dismantling of unserviceable knob and S&F new aluminium anodized knob of 25mm dia ,fixed with nuts & washers complete all as specified and as shown on drawings.
Dismantling old unserviceable drawer and S&F new drawer of 1st class seasoned hard wood complete all as specified and shown on drawing.
M&L for french polishing to wooden surfaces after preparing the surfaces smooth complete all as specified and directed.
TRESTLE WOODEN : FD-141 (M)
Removing unserviceable existing rail and S&F new rail of 1st class seasoned hard wood of section 100mmx100mm and length 2440mm complete all as specified and shown on drawing .
Removing unserviceable existing legs and S&F new legs of 1st class seasoned hard wood of section 100mmx100mm and length 400mm complete all as specified and shown on drawing .
Removing unserviceable existing stiffener and S&F new stiffener of 1st class seasoned hard wood of section 65mmx100mm and length 1220mm complete all as specified and shown on drawing .
M&L for creosote oil to wooden surfaces after preparing the surfaces smooth complete all as specified and directed. Note :- A Sum of Rs. 17491.40 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page Nos.31,32 & 33 (Schedule of credit) of Tender Documents.
PACHNANDA BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .