REPAIR MAINT OF CEILING FAN EXHAUST FAN WALL MOUNTED FAN AND MISC EM WORKS AND REPAIR REPLACEMENT AND MAINT OF STREET SECURITY LIGHT FOR OTM ACCN AT BAIRAGARH UNDER GE BHOPAL

Amount

REPAIR/REPLACEMENT AND MAINT OF STREET/SECURITY LIGHT AT OTM ACCN AT BAIRAGARH

Taking down defective 40/150/250/400 watt SV/MH street light fittings, security light, CFL/flourescent tube light fittings (ant type & size), LED light any type, through ladders, mounted on any typr of poles/bldgs (upto 13 mtr height) with bracket, disconnecting, testing all components, dismantling for replacemnt defective components such as choke, ignitors, holders, capacitors, lamps, driver, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the light fitting after fixing of new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares parts such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 watt SV/MH/LED lamp type light fittings (aprox 6 to 9 Nos in each fitting), integral/ non integral type flood light fitting, aviation light, etc, any type, mounted on semi high mast pole upto 12 mtr height fixed on brackets/round ring (cage), disconnecting, testing all components, dismantling for replacement of defective components such as choke, ignitors, holders, capacitors, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 watt SV/MH/LED lamp type light fittings (aprox 6 to 9 Nos in each fitting), integral/ non integral type flood light fitting, aviation light, etc, any type, mounted on semi high mast pole 12 to 20 mtr height fixed on brackets/round ring (cage), disconnecting, testing all components, dismantling for replacement of defective components such as choke, ignitors, holders, capacitors, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) Spares such as choke, ignitor, lamp holder, cable, lamps, etc shall be paid and measured separately. (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Supply only 400 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Supply only 150 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

Supply only 400 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

Supply only 150 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

Supply only 150 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

Supply only electronic ignitors suitable for 150/250/400 watt SV/MH street light fitting 240V, 50 Hz suitable for 5 mtr striking distance complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

Supply only LED driver suitable for 45 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Supply only LED driver suitable for 25/30 watt LED light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Supply only LED driver suitable for 70 watt LED light / flood light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Supply only LED driver suitable for 100 watt LED light / flood light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

Supply only LED driver suitable for 150 watt LED light / flood light (to suit as existing light fitting of any make) complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F cable PVC insulated and PVC multisheathed size 4 Sqmm twin core stranded aluminium conductor complete all as specified and directed .

S&F in repairs Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

S&F in repairs IP65/IP66 Thermoplastic Polycarbonate cable Junction box for street lights; size not less than 210mm x 155mm x 102 mm with 25 sqmm terminal of 32 Amps rating for three phase & neutral mounted on din rail with locking arrangement fixed to PSC/Steel Poles by means of suitable size of clamps made of MS flat 20 x 4mm - 2 Nos with nut, bolts & double washers and including provn for fixing 01 No. single pole, MCB, 10 amps,10KA, ‘B’ series with ON/OFF flap complete all as specified and directed. Make :- Hensel Cat part No:- HENKF PJB-5 or equivalent as approved.

Taking down existing street light fitting any type and S&F Integral LED Street light luminaire of 30 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro (Cat No. LR02-291-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells as approved by GE.]

Taking down existing street light fitting any type and S&F Integral LED Street light luminaire of 45 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses, LED street light luminaires with IP 65 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro (Cat No. LR02-501-XXX-57-XX) or equivalent in Philips/ Crompton/Bajaj/Havells as approved by GE.]

Taking down existing flood light fitting any type and S&F Integral LED flood light luminaire of 150 W with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro (Cat No. LF20-192-060-57-G2) or equivalent in Philips/ Crompton/Bajaj/Havells as approved by GE.]

Taking down existing flood light fitting any type and S&F Integral LED flood light luminaire of 100 W with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection with all fixing arangement, nuts, bolts and washer connecting to electric system with 2.5 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole, testing on completion, complete all as specified and directed. [MAKE: Wipro (Cat no. LF20-122-060-57-G2) or equivalent in Philips/ Crompton/Bajaj/Havells as approved by GE.]

Taking down unserviceable post top lantern fittings and Supply and Fixing LED Post top lantern 1 x 40 Watt, made up of aluminium spigot housing with decorative clear acrylic difuser and IP65 p[rotection, complete all as specified and directed. [MAKE: Bajaj (Cat No. 112538, CELESTA' BGCL 40 W LED (White) or equivalent in Philips/ Crompton/Havells as approved by GE.]

S&F in repairs 3 Pole contactor of 95 Amp, AC1 rating 160 Amp, type MNX 95, Aux cont 2 NO + 2 NC, 3 phase, 415 V as per IS 13947-4-1 , complete all as specified and directed. [MAKE: L&T cat No : CS 94136 or equivalent in Siemens/Schneider as approved by GE.]

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed. including necessary form work complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/KEI/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 25 sqmm, 3.5 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/KEI/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/KEI/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 10 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/KEI/V-MARC as approved by GE]

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

M&L for painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/street light with two coats of aluminium paint after scratching out old paint, cleaning the existing surface rust free, preparation of the surface including marking pole numbers in a 20 cm dia yellow circle with number writing with black synthetic paint & painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of white fluorescent paint (up to 1.5 mtr height) throughout the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

M&L for Painting to the LT PCC poles with strips in alternate from bottom to top (up to 1.5 Mtrs) with three strips of black synthatic paint & two strips of fluorescent white paint through out the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole and two coat of aluminium paint to channels, cross arm, clamps and pipesfixed/ mounted on pole after scraching out old paint, cleaning and making exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 20 cm dia yellow circle with number writting with black syenthic paint complete all as specified and directed.

M&L for Painting of steel pole High mast Pole up to 13 mtr height with luminarie mounting ring with two coat of aluminium paint after scraching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking including one coat of lime wash on PCC copping of pole complete all as specified and directed.

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning, of automatic street light switch of capacity 5 KW in three phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories all as specified and directed by EIC. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW3P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) 25Amp 4 Pole or 3 Nos 25Amp 1 Pole: Make : BCH/L&T/Schneider (ii) MCB 32Amps(SP),10 KA ,240 volts (SP 3Nos) Make : Scheinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED or equivalent as approved by GE

Taking down u/s automatic street light switch and Supply, fixing testing and comissioning, of automatic street light switch of capacity 5 KW in single phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories all as specified and directed by EIC. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC5KW1P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) single phase 50-60Amp 4: Make : BCH/L&T/Schneider (ii) MCB 63Amps(SP),10 KA ,240 volts (SP 3Nos) Make : Scheinder/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED or equivalent as approved by GE

S&F in repair nature time switch, model SWADEEP -02 Sensor Only, along with switching timer, complete all as specified and directed.

S&F in repairs 3 Pole contactor of 25 Amp, AC1 rating 160 Amp, 3 phase, 415 V as per IS 13947-4-1, suitable for nature time switch model SWADEEP-02, complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER/CG, SIEMENS as approved by GE.]

S&F in repairs contactor of 16 Amp, AC1 rating 160 Amp, single phase, 240 V as per IS 13947-4-1, suitable for nature time switch model SWADEEP-02, complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER/CG, SIEMENS as approved by GE.]

S&F MCCB, 200 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 160-200 Amp including spreader terminals and phase barriers complete all as specified and directed. Make :- L&T (d - sine) Cat No. CM90642OONO or equivelent in Scheinder/ Legrand.

S&F MCCB, 160 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 125-160 Amp including spreader terminals and phase barriers, complete all as specified and directed. Make :- L&T (d - sine) Cat No. CM90642OOMO or equivelent in Scheinder/ Legrand.

S&F MCCB, 100 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 80-100 Amp including spreader terminals and phase barriers, complete all as specified and directed. Make :- L&T (d - sine) Cat No. CM90642OOLO or equivelent in Scheinder/ Legrand.

Dismantling of ACSR conductor of any type and size complete all as specified and directed.

M&L for providing ACSR overhead lines on existing LT PCC poles/steel tubular poles with aluminium conductor steel reinforced including straining properly on insulators and binding with aluminium binding wire complete after dismentling and taking down old ACSR conductor of any size and make, complete all as specified and directed.

Cutting of bituminous road/PCC hard standing/road/floor for laying of GI pipe upto 80mm dia (trench not more than 0.3m x 0.3m) for passing of cable including making good the disturbed surfaces all as per existing complete all as specified and directed. Note:-GI pipe shall be measured & paid separately under relevant items of this schedule.

M&L for tightening and re stringing of existing ACSR over head conductor of any size/type on HT/LT over head line with the help of rope/line wise and tighting the conductor to permissiable sag with and including new aluminium tape/aluminium wire complete all as specified and as directed. (each conductor to be measured seperatly)

S&F in repairs Analog time switch (FM series) all as per existing complete all as specified and directed. [MAKE: L&T (Model- GIC) /SCHENIDER/BCH as approved by GE.]

Dismantling of LT insulator of any type any size complete all as specified and directed

S&F pin type, porcelain, vitreous white/ brown insulator including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 150mm height, 150mm dia for 1100 volts grade complete all as specified and directed.

S&F shackle type, porcelain, vitreous, white, brown or green insulator including galvanized mild steel straps, washers, insulator bolts, washers and nuts; 75mm height, 90mm dia for 1100 volts grade complete all as specified and directed.

Taking down old tilted existing pole / semi high mast pole any type any size (tilted in foundation due to setting in loose/black cotton soil) after removing existing conductors, light fittings, insulators, cross arms, channels, clamps, pipes, light mounting circular cage etc and re-erecting of same pole in existing and new location with new PCC and refitting all accessories which are taken down as same, complete all as specified and directed. (Note : Excavation, Returning filling, Removal of excavated material will be measured and paid separately)

S&F GI Nipple of size 25mm dia and 6 inch long for existing large size street light bracket (welding work) , height of pole 7/8 mtr above ground level, complete all as specified and directed.

S&F MS clamp with nut and bolt of suitable size for street light bracket mounted on PCC pole, height of pole 7/8 mtr above ground level, complete all as specified and directed.

S&F MS clamp with nut and bolt of suitable size for street light bracket at mount steel tubular pole, height of pole 7/8 mtr above ground level, complete all as specified and directed.

Supply only square/hexagonal nut bolt and washer 10 to 15mm dia of different sizes as per site requirement, complete all as specified and directed.

Taking down old rusted cross arms of MS channel or angle sections etc. complete and setting aside for reuse or given to contractor as schedule of credit, complete all as specified and directed.

Supply, fabricating, fixing structural mild steel channel, angle iron, flat iron and brackets etc. for fabrication of cross arms, bracings, bolts, pole clamps and back plates including nuts, bolts and washers, welding cold or hot, drilling holes for insulators in any shape or size as indicated etc and inclusive of one coat of aluminium paint over a coat red oxide primer, complete all as specified and directed.

M&L for taking down LT cable any type and size upto 25sqmm, 2/3.5 core layed/hanging on overhead pole/building/tree and relayed in underground with making complete electric connections, complete all as specified and directed. (Note : Excavation, Returning filling, Removal of excavated material, sand and bricks will be measured and paid separately)

REPAIR/MAINT OF CEILING FAN, EXHAUST FAN, WALL MOUNTED FAN AND MISC E/M WORKS AT BAIRAGARH

NOTE: - (i) The quoted rate deems to include for all minor expenses required for making the complaint functional. (ii) Repairing/ rewinding of ceilling fan/ exhaust fan shall be carried out in the AGE E/M Bairagarh subdivision in present of concern JE E/M. (iii) Space/room will be provided by AGE E/M in the E/M yard for carring out repair work. (iv) Contractor staff will collect defective fans from concern JE E/M, check the fans after opening it, and intimate the defects in the fan to JE E/M before carring out the repairs. (v) The bearing of fan should be of NBC/SKF/FAG make only. No other make will be accepted.

Taking down old ceiling fan/Exhaust fans/Wall mounting fan of any cap/sweep after disconnecting the electric supply from any site, checking for its electrical defect and opening fans for checking of mechanical defect after dismantlling of fan, carried out repair/over hauling including removing dust and grease, and cleaning of internal mechanical parts of fan with kerosene oil, checking of alignment of shaft, oiling and greasing, checking of worn out bearing and other defective parts, winding, condenser etc and re-assembling, and connecting/refixing of fans in its original position by providing new GI nut bolt, lock washer and lock/split pin complete all as specified and directed. NOTE:- (i) Burnt out fan shall be kept separately for rewinding which shall be measured and paid seperately under appropriate item of BOQ. (ii) The quoted rates is deemed to include for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced parts shall be measured and paid for separately under appropriate item of BOQ as "Supply only". (iii) Painting of fan shall be on requirement basis and shall be measured and paid for separately under appropriate item of BOQ.

Supply only the following items for fixing against defective parts of fan taking down under item No 1 here in before complete all as specified and directed.

Bearing No 6201 [Make : SKF/NBC/FAG] .

Bearing No 6202 [Make : SKF/NBC/FAG] .

Bearing No 6203 [Make : SKF/NBC/FAG] .

Bearing No 6204 [Make : SKF/NBC/FAG] .

Rubber Bush as required at site suitable for ceiling fan .

Condenser 2.5 mfd [Make: Epcos/Tibcon].

Condenser 4 mfd [Make: Epcos/Tibcon].

Lath work of Fan shaft any type/ size

M&L for rewinding of ceiling fan of sweep 1200 mm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of ceiling fan of sweep 1400 mm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of ceiling fan of sweep 1200 mm (old model, Heavy duty of make Kessal/ Usha/ Polar or any other make) with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of Exhaust fan of 450 mm any make any model,1400 RPM with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing, etc. complete all as specified and directed.

M&L for rewinding of Exhaust fan of 380 mmm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of Exhaust fan of 280/300 mm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of wall mounting fan of sweep 400 mm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

M&L for rewinding of pedestal fan of sweep 400 mm any make any model with suitable gauge copper winding wire (super enamelled) including all insulating material including necessary heat varnishing, testing etc complete all as specified and directed.

S&F in repairs blade assembly of wall mounted fan of 400 mm sweep complete all as specified and directed [Make: As approved for existing].

S&F in repairs 'U' clamp for hanging ceiling fan in ceiling to be fixed with 3" long anchor fastener 3 Nos for each clamps complete all as specified and directed [Make: As approved for existing].

S&F in repairs ceilling Fan down rod of size 15mm GI pipe medium grade (ISI mark) length upto 50cm including making holes, nut bolts, spilit pin washers etc complete all as specified and directed [Make: As approved for existing].

S&F in repairs PVC insulated multistranded Copper conductor, sheated round cable ISI marked 1.0 sqmm x 3 core complete all as specified and directed. [Make : Finolex/ Havells/Paragon]

M&L for painting of following Item with two coats of DUCO paint (ISI grade) white using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos in all ceiling and Exhaust fan complete all as specified and directed. Note:- Taking down and fixing of fan will be measured under item No. 65.00 here-in-before.

Ceiling fan upto 1200/1400 mm sweep complete.

Exhaust fan upto 280/300/380/450 mm sweep with smoke grey paint

M&L for attending the complaint of fan not working/ slow speed at site by deploying electrician and checking all electrical connection, tightening/ refixing of any loose electrical connections/ wires, replacement of weak / unservicable condensor etc at site and to make the fan functional without taking down from ceiling complete all as specified and directed. Note : Cost of condensor will be paid under relevant item.

S&F in repairs blade assembly of celling fan of 1200 mm sweep (set of three) of make, colour and pattern as per existing complete all as specified and directed.

S&F in repairs switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/LEGRAND/HAVELLS as approved by GE]

S&F in repair switch socket combined outlet 6 pin, flush type, 15 Amp, multi purpose SI marked complete all as specified and as directed. Make : Anchor / L& T/ Havells

S&F in repair stepped type electronic fan regulator 100 watt flush type (delux) on existing hylem laminated sheet complete all as specified and as directed. Make: Anchor (Delux) / L&T/ Havells

M&L for complete servicing of solar hot water system (solar water heater, flate plate collector type), with cleaning of sluge deposited in pipe line of solar pannel by using cleaning agent, check and repair of pipe line for any leakage, including carring out brazing of copper pipe for leakage, cleaning of glass shell, cleaning of hot water tank, replacement ofunserviceable clamps, adopter, hose pipe including complete sevicing to keep the plant functional of capacity up to 200 LPD complete all as specified and as directed.

S&F in replacement electrical heating element of 2.0 KW (long thread type, as per existing), ISI marked, of solar water heater of capacity up to 200 LPD complete all as specified and as directed. Make: Solar Element or equivelent as approved by GE.

S&F in replacement thermostate, long body, ISI marked of solar water heater of capacity up to 200 LPD complete all as specified and as directed.

S&F in replacement solar hot water tank with thermal insulation suitable for solar water heater of capacity 100 LPD complete all as specified and as directed. Make : TATA/ Supreme solar complete all as specified and as directed

S&F in replacement solar hot water tank with thermal insulation suitable for solar water heater of cap 200 LPD complete all as specified and as directed. Make : TATA/ Suprem solar.

S&F in replacement hot water pipe insulation with glass wool and aluminium cladding 20 mm bore including all material complete all as specified and as directed.

S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 2 way, single door without bus bar, enclosure made up of CRCA sheet steel RAL 9003 powder coated, IP 30 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. Make- Legrand/ Seimens/ Schinder.

Taking down of Gyser of any capacity any type from exiting position for descaling, removing its accessories removing the scale (white presipated) deposited in it, cleaning the inner tank properly and re-assembling the same and refixing to its existing location with testing for its proper functioning complete all as specified and directed.

Disconnecting, dismantling & taking up or down existing unserviceable geyser element of any description and in any position from geyser of 25 Ltrs / 50 Ltrs capacity installed at site and supply and fixing new geyser element of 2.0 KW, 230 volts to match with the existing system complete all as specified and directed. [Make: Bajaj/ Usha /Recold]

Disconnecting, dismantling & taking up or down existing unserviceable geyser thermostat of any description and in any position from geyser of 25 Ltrs / 50 Ltrs capacity installed at site and supply and fixing new thermostat with setting range 30 C to 80 C suitable for 230 volts AC electric supply. complete all as specified and directed. [Make : Danfoss / Ranco / Indfoss]

Disconnecting, dismantling & taking up or down existing unserviceable geyser indication lamp of any description and in any position from geyser of 25 Ltrs / 50 Ltrs capacity installed at site and supply and fixing new indication lamp (set of two) complete all as specified and directed.

Disconnecting & taking up or down existing unserviceable PVC connections of any description from geyser installed at site and supplying and fixing new 15mm PVC Connection with steel reinforced pipe for hot water connection of length 450mm including rubber washers complete all as specified & directed. [Make :Prayag or equivalent in approved make by GE.]

M&L for painting of the items given below of any description and in any position, by applying two coats of paint (DUCO) white by spray machine including preparation of existing decorated surfaces including writing MES No. in capital letters of height not less than 20 mm in the pattern and style complete all as specified and directed:- Geyser 25 ltrs capcity.

M&L for painting of the items given below of any description and in any position, by applying two coats of paint (DUCO) white by spray machine including preparation of existing decorated surfaces including writing MES No. in capital letters of height not less than 20 mm in the pattern and style complete all as specified and directed:- Geyser 50 ltrs capcity.

S&F in replacement of 3 pin plug top AC-230 v 15 Amp complete all as specified and directed. Make : Anchor/ L&T/Havells

S&F single pole and neutral enclosure with two pin and earth, plug and socket , suitable for single phase 240 V, complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and directed. Make : Legrand cat part No. 607841 or equivelent in Scheinder/ L&T.

M&L for Sub main wiring with two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor FRLS cable (with colour code), drawn in and including non metallic rigid PVC conduit of 25 mm dia, ISI marked including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete all as specified and directed. Make of wire : L&T / Polycab/ C&S

Schedule of credit (calculation will be done off line) Rs. 3,55,164.00

RAJPATI CONSTRUCTION

M/s VIKAS TRADERS