Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.7 CrAccepted-AOC | ₹20.7 Cr Quoted ₹22.4 Cr | L1 | Accepted-AOC Accepted Bid |
| 2 | L2₹23.2 CrRejected-Finance | ₹23.2 Cr | L2 | Rejected-Finance Due to High Rates |
| 3 | L3₹23.8 CrRejected-Finance 102 HILL VIEW APARTMENT TIDKE COLONY NASHIK 422002 MAHARASHTRA INDIA | NASHIK | NASHIK | MAHARASHTRA | 422002 | ₹23.8 Cr | L3 | Rejected-Finance Due to High Rates |
Tender Value
₹19.8 Cr
EMD Value
₹9.9 L
Closing Date
16 Nov 2023, 5:00 pmClosed
Executive Engineer, Public Works Division, Nashik
Executive Engineer Public Works Division Nashik Bhandkam Bhawan Trimbak Road Nashik Tal. Dist. Nashik Tel. No.- 0253-2583761-64 2575324
Construction of Concrete Road and Builtup gutter on Nashik Niphad Yeola (MSH-2) Road in Nashik Municipal Corporation Area Km.149/900 to 151/200 Tal.Dist.Nashik
2023_PWR_956259_1
E-Tender Notice No.42 for 2023-24 SBD
Open Tender
Civil Works
545 days
Tal.Dist. Nashik
As Per NIT
9 documents required · 9 mandatory
₹3,540
₹9.9 L
The Chief Engineer, P/W. Region Nashik
3 Mar 2024
3 Nov 2023
17 Nov 2023
3 Nov 2023
16 Nov 2023
3 Nov 2023
9 Nov 2023
Amount
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.
Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete.
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanical Treatment Ferrous material 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etc. complete.
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and laying weep holes of 100 millimetre diameter Asbestos Cement/Poly Vinyl Chloride pipes as per drawing for abutment returns, return walls etc. Complete.
Scarifying the existing granular road surface to a depth of 50 millimeter and disposal of scarified material within all lifts and leads upto 1000 metres.
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content , and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - III Material
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to Indian Standard : 383, the size of coarse aggregate not exceeding 25 millimeter, , cement content not to be less than 150 Kilogram per cubic meter, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to Indian Standard 3395 : 1997 below concrete pavement including all materials and labour complete.
Providing and laying in-situ M 40 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge.
Providing and fixing in position Thermo Mechanically Treated Ferrous 500, 32 milimetre diametre dowel bars precoated with anticorrosive epoxy paint of required Diameter 60 centimetres Long and at 30.00 centimetres Centre to Centre and wherever directed including handling, straightening, necessary cutting supported by Thermo Mechanically Treated Ferrous 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.
Providing and fixing in position Thermo Mechanically Treated Ferrous 500, tie bars precoated with anticorrosive epoxy paint of 12 millimeter diameter 70 centimeter long and at 30.00 centimeter center to center and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of Thermo Mechanically Treated Ferrous 500, chairs with proper alignment etc. complete.
Cutting transverse contraction joints 3 to 4 millimeter wide and depth 60 millimeter in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 millimeter wide at top having depth of 15 millimeter as directed by Engineer incharge.
Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 millimeter deep x 8 millimeter wide)
Providing expansion joints with 25 millimeter thick bituminous pad as per detailed drawings etc. complete.
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to American Standard of Testing Machine D 4280 Type H and complying to Specifications of Category A of MORTH Circular Number RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimetre, 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 Square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre) from the body is to be a minimum value of 500 Kilogram Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.
Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 millimeter made out of 4 millimeter aluminum composite material ( ACM) sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress :67-2012 Table No 8.3 Supported with back support frame 25 millimeter x 25 millimeter x 3 millimeter, duly painted on back side with grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 65 millimeter X 65 millimeter X 6 millimeter, 3.45 meter long, duly painted with with flat oil paint having alternate black and white bands of 25 centimeter width including Galvanised Iron fixtures etc; fixing the boards in M25 grade concrete block of size 60 centimeter X 60 centimeter X 75 centimeter including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and casting in situ or precast tapering Reinforced Cement Concrete M-20 Mountable type Kerb without gutter ( as per Indian Road Congress 86 1983) embedded 125 millimeter below ground level over M-10 Plain Cement Concrete finished neatly with Cement Morter 1:2, setting the same in Cement Morter 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
Providing and laying in situ cement concrete M -30 with tremix treatment for 200 millimeter thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimeter wide and 20 millimeter deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter ( excluding reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artifitial Sand etc. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.
Providing and laying Cast in situ / Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and fixing mild steel grill work for windows, ventilators etc. 20 kilogram per squaremetre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
Supplying hard murum/ kankar at the road site, including conveying and stacking complete.
Spreading hard murum/ soft murrum/ gravel or kankar for side width complete
Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 2 millimeter aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress : 67-2012 Table No 8.3, supported with back support frame 25 millimeter x 25 millimeter x 3 millimeter, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 millimeter x 75 millimeter x 6 millimeter, 3.5 meter long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 centimeter x 45 centimeter x 60 centimeter, 60 centimeter below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimeter width including Galvanised Iron fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade per colour of 2.5 millimeter thick including 1.5 Refractive index reflectorizing glass beads at 250 gram per square meter .Thickness of 2.5 millimeter is exclusive of surface applied glass beads as per Indian Road Congress 35:2015. Initial Dry reflectivity RL shall be > 250 millicandela per suare meter per lux measured in the initial 7 days and sustained reflectivity RL of 100 millicandela per suare meter per lux and Qd of 100 millicandela per suare meter per lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to Indian Road Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for Indian Road Congress 35:2015).
Providing and laying cement concrete pipe of Indian Standards 458:2003 Non Pressure-3 class of 1000 millimetre diameter in proper line, level and slope etc. complete.
Providing and laying cement concrete pipe of Indian Standard 458:2003 Non Pressure-3 class of 600 millimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.
Conveying materials obtained from road excavation including all lifts and lead of over 5Kilometre. from the site of excavation to the site of deposition as directed.
ANAND CONSTRUWELL PVT. LTD.
FORCON INFRA PVT. LTD.
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid