REPAIR REPLACMENTOF OLD RCC GI CI DI PIPE LINE OF VARIOUS SIZE AND CONNECTED ITEMS OF OTM MD ACCN UNDER GE SAUGOR

Amount

Excavation in trenches in Hard/dense soil not exc 1.5m wide & not exc 1.5 deep and getting out for laying of pipe complete all as specified and directed..

Removing excavated material in exc 50 m and depositing where directed of a level n exc 1.5m above the starting point.

Returning filling trenches with excavated earth including spreading leveling watering and well ramming in layer not exc 25 cm thick complete all as specified and directed..

Taking up or down and Re-fixing/relaying/Rerouting only of GI tubing for the following sizes after cleaning in same location or other location new or old position , in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i)GI Pipe shall be used obtain from item Ser . No- 4.01 to 4.06 (ii). GI fittings shall be measured under relevant items (iii). If required excavation and earth work will be measured and paid separately

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

40mm bore of pipe

50mm bore of pipe

80mm bore of pipe

Supply and lay tubing ,medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches taking up or down of old u/s GI tubing and connections of following size. Note: Excavation and earth work will be measure and paid seperately:-

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

40mm bore of pipe

50mm bore of pipe

80mm bore of pipe

Supply and lay tubing,medium grade galvanised with all fittings such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in walls, ceiling & laid in floors taking up or down of old u/s GI tubing and connections of following sizes. Note : Rate including for fixing suitable clamp with wooden plug alongwith screws in intervals:-

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

40mm bore of pipe

50mm bore of pipe

80mm bore of pipe

S&F gun metal globe valve with iron wheel, screwed both ends for iron pipes including taking down old existing unserviceable Gate valves of following sizes complete all as specified and directed:-

15mm dia

20mm dia

25 mm dia

40 mm dia

50 mm dia

Opening the top of the sluice valve carefully, taking out the gate & spindle, scraping/cleaning the gate both sides, cleaning/scraping of sluice valve body throughly from inside, refixing / replacing the spindle, gate cheak nut and top of sluice valve including replacement of gland packing rope of suitable size & rubber gasket and Bolt,nut with washers necessary metalling ,grinding and levelling of the valve door seating complete for the following sizes of Sluice valve (Note :- Replacement of check nut/ spindle etc shall be measured and paid separately under relevant items) :-

80 mm bore.

100 mm bore.

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Supply only spindle stainless steel suitable for following size CI sluice valve :-

80 mm bore.

100 mm bore.

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Supply only sluice valve check nut Gun metal as per sample (Square/rectangle) of following size :-

80 mm bore.

100 mm bore.

150 mm bore

200 mm bore

250 mm bore

300 mm bore

Carry out Labortary analysis test of treated and unreated drinking water Bacteriogical examination of standard plate count, total oilform, Faecal Coliforms, Faecal Streptococcus and physical examination report to e submitted to department as received from laboratary. Note: the Labortary test shall be carried out to Madhya Pradesh water and drainage board.

Carry out Laboratary analysis test of sewage water and treated sewage water samples test results of the PH value, total suspended solids. Chemicals Oxygen demand bio oxyzen demand, Oil and grease, Coliform counts & Residual chlorine to be submitted to department as received from Labortary for STP as when required by department. Note: The laboratory test shall be carried out in approval labs and recognised by state/Central Pollution control Board of Madhya Pradesh.

Dismantling the blocked DI Pipe and specials of any size of any length from sewage collection sump to Aerator, Flaculator to sludge Pump Each Sets and Sludge pump Each Set to drying beds removing and disposal of the clocked materials, solids sludge cleaning externally and internally suitable and refixing DI pipe andnspecials including replacing gaskets bolts and nuts with wahsers and testing complete all as specified and directed by Engineer-in-Charge

Removing raw sludge, draining out the sewage below foot valve the bottom of the raw collection sump, Clarifier tanks, Aeration tank and Lift Jack Wells of any size including scrapping brushing side walls bottom slab underneath of roof slab of cokllection sump bottom side walls of aeration tank and clarifier tank removing algea sludge and cleaning with fresh water and flushing out from the bottom including one coat of white washing internal surfaces and One coat of colour washing external surfaces complete all as specified and directed by Enginner-in-Charge

S&F cast iron bends (any radius and angle) tappers any type (Straight, bend, increasing, decreasing or double socket) Tee, pieces single branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs upto the 150mm dia

S&F cast iron bends (any radius and angle) tappers any type (Straight, bend, increasing, decreasing or double socket) Tee, pieces single branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs of the size of 200 to 300mm dia

M&L for run lead joint for spigot and socket pipes and fittings including taking out the unserviceable lead joints with spun yarn of the following sizes:-

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

350 mm bore

400 mm bore

450 mm bore

Takig up or down and relaying/re routing only cast iron mains ( including all fittings) with spigot and socket ends , tyton joint and lead joints including taking up cast iron/Ductile iron water mains ( including all fittings) with spigot and socket ends/ Tyton joints and lead joints for the following sizes including burning out joints and recovering lead complete all as specified and directed Engineer-in-Charge for the following sizes:- Note: Lead Joint and Tyton Joint shall be measured under relevant items

80 mm bore

100 mm bore

150 mm bore

200 mm bore

250 mm bore

300 mm bore

350 mm bore

400 mm bore

450 mm bore

S&F sluice valve of the following sizes CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with SS spindle (ISI marked) conforming to IS : 14786 – 2000, short body all as specified including nuts ,bolt, washers and gasket including taking down of existing unserviceable sluice valve from the existing pipe line complete all as directed by Engineer-inCharge. Note: Quoted rate deemed to include making good the damaged valve chamber

80 mm bore

100 mm bore.

150 mm bore

Supply & fix double action flanged Air release valve of size 80 mm dia including taking down the existing unserviceable ARV from the existing pipe line including replacement of bolt, nuts with washers and gasket complete all as specified and directed by Engr-in-Charge

M&L for cutting of bituminous Road/floor/plinth protection for laying pipe not exceeding 1.5mm and 1.5 depth including refiling with excavated material and watering well ramming/compecting and making good with PCC 100 mm thick complete all as specified and directred by Engg-in-charge Note: PCC shall be measured separately

M&L for PCC 1:4:8 type B 1 using 20 mm graded aggregate as in filling and making good distrubed surface complete all as specified and directed by the Engineer-in-charge

Taking out unserviceable ball valve (Float valve) high pressurre of PTMT with epoxy coated Aluminium tod& high density plastic ball screwed for iron pipe and fixed (Mini Weight 15 mm -142 gms) of size 15 mm dia complete all as specified and directed by Engineer-in-Charge

All as per item ser.No.25 here in before but 20 mm dia (Ball weight 210 gms)

S&F in repairs including leak proof of GI tubing fittings ,ISI marked fixed in trenches/floors etc complete all as specified and directed by Engr-in-Charge of the following sizes:- Note: Excavation and earth work will be measure and paid seperately

GI Socket 15 mm

GI Union 15 mm

GI Elbow 15 mm

GI Socket 20 mm

GI Union 20 mm

GI Elbow 20 mm

GI Pipe Nipple 15 mm dia 3" long

GI Pipe Nipple 15 mm dia 6" long

GI Pipe Nipple 20 mm dia 3" long

GI Pipe Nipple 20 mm dia 6" long

GI Pipe Nipple 25 mm dia 3" long

GI Pipe Nipple 25 mm dia 6" long

GI Tee Equal 15 mm dia

GI Tee Equal 20 mm dia

GI Tee Equal 25 mm dia

GI Socket reducer 20x15 mm

GI Socket reducer 25x15 mm

GI Socket reducer 25x20 mm

Supply only follwing items:-

Supply only TCCA -90 (Trichloroisocyabnuric acid) for Swimming pool

Supply only clacium based granular high strength disinfectant chlorinating chemical having 65-70% concntration for treatment of drining water complete all as directed by Engineer-in-Charge. Make:AQUAFIT /DECLIBAC Note:- i). Brand name, Batch no and complete particulars of mananufacturer sholud be printed on the container/packing complete all as specified and directed. ii). Necessary test certificate shall be provided from authorized laboratory complete all as specified and directed iii). Material shall be ordered one month in advance by the department

Comprehensive maint with material and servicing of the Vehicle BA .No. 19B-132102 E (Maruti Dzire) (Staff Car) , Transporting to Authorized Maruti Service centre/Delar Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of coolant, brake oil, steering oil, engine oil,gear box and differential oil, cleaning and maint of radiators including leakeage arresting and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnement, Change of Wheel Greasing, Greasing of all mechanical moving parts,Checking of the Battery Charging system, replacement/providing of the floor mat, mud guard flab, Cotton waste, Micro fiber cloth, Cleaning brush, Brosso Polish, Car purfume,Vehicle body polishing entire contract period and as per manufacturer recommendation and requirement of the following Maruti Dzire vehicle complete all as specified and directed by the Engineer-in-Charge.

Comprehensive maint with material and servicing of the Eicher vehicles, Transporting to Authorized Eicher Service centre/Delar Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of coolant, brake oil,, engine oil, cleaning and maint of radiators and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnment, Change of Wheel Greasing, Greasing of all mechanical moving parts,Checking of the Battery Charging system, replacement/providing of the floor mat, mud guard flab, Cotton waste, Micro fiber cloth, Cleaning brush entire contract period and as per manufacturer recommendation and requirement of the following Eicher vehicles complete all as specified anddirected by the Engineer-in-Charge. Note :- Replacement of spares if required other than mentioned in above will be paid separately under revelant item below.

Vehicel BA.No. 02D-147810X

Vehicel BA.No. 04D-160811W

Vehicel BA.No. 09D-181299W

Comprehensive maint with material and servicing of the TATA Mobiles/Zenon pick up van vehicles, Transporting to Authorized TATA Service centre/Delar Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of coolant, brake oil,, engine oil, cleaning and maint of radiators and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, wheel alingnment, Change of Wheel Greasing, Greasing of all mechanical moving parts,Checking of the Battery Charging system, replacement/providing of the floor mat, mud guard flab, Cotton waste, Micro fiber cloth, Cleaning brush entire contract period and as per manufacturer recommendation and requirement of the followingTATA Mobiles/Zenon pick up van vehicles complete all as directed by the Engineer-in-Charge. Note :- Replacement of spares if required other than mentioned in above will be paid separately under revelant item below.

Vehicel BA.No. 19C-108107E

Vehicel BA.No. 08C-083543X

Vehicel BA.No. 08C-085830 M

Comprehensive maint with material and servicing of the Royal Enfiled 350 cc Motor cycle, Transporting to Authorized Royal Enfiled Service centre/Delar Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of Engine oil and Air Filter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, replacement/providing of the mud guard flab, Cotton waste, Micro fiber cloth, Cleaning brush entire contract period and as per manufacturer recommendation and requirement of the Vehicel BA.No. 04A-056235K ( Make:- Royal Enfiled ) complete all as directed by the Engineer-in-Charge.

Comprehensive maint with material and servicing of the Hero Honda Splendor + Motor cycle, Transporting to Authorized Hero Honda Service centre/Delar Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of Engine oil and AirFilter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, replacement/providing of the mud guard flab, Cotton waste, Micro fiber cloth, Cleaning brush entire contract period and as per manufacturer recommendation and requirement Vehicel BA.No. 11A-62541W (Make:- Hero Honda Spl +) complete all as directed by the Engineer-in-Charge.

Taking down the existing defective Self starter from Eicher Vehicle and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed by the Engineer-in-charge

Taking down the existing defective Alternator from Eicher Vehicle and replacement of work out spares like Rotor Coil, Field coil, Rectifier,Electronic regulator with Carbon brush with Holder, refixing in same position and testing complete all as specified and directed by the Engineer-in-charge

Taking down the existing defective Self starter from TATA Mobile/Xenon pick up Vehicle and replacement of work out spares like Bendex drive, carbon brush , solinoid coil,Armature including rewinding stator, refixing in same position and testing complete all as specified and directed by the Engineer-in-charge

Taking down the existing defective Alternator from TATA Mobile/Xenon pick up Vehicle and replacement of work out spares like Rotor Coil, Field coil, Rectifier,Electronic regulator with Carbon brush with Holder, refixing in same position and testing complete all as specified and directed by the Engineer-in-charge

Dismantling and taking down Eicher vehicle defective clutch system and repair replacement of worn-out spare and refixing, testing complete all as specified and directed by Engineer-in-Charge Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Eicher vehicle as per original manufacture (Make: I EICHER/TVS ) :-

Clutch plate

Pressure plate with springs

Clutch cylinder

Sleeve cylinder

Release Bearing

Bush Bearing

Release Bearing lever along with spring

Dismantling and taking down TATA Mobile/Xenon pick up vehicle defective clutch system and repair replacement of worn-out spare and refixing, testing complete all as specified and directed by Engineer-in-Charge Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of TATA Mobile/Xenon pick up vehicle as per original manufacture ( Make:-TATA/TVS):-

Clutch plate

Pressure plate with springs

Clutch cylinder

Sleeve cylinder

Release Bearing

Bush Bearing

Release Bearing lever along with spring

Repair and overhauling of Eicher Vehicle defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp & rubber, universal cross, yok teeth and testing complete all as specified and directed by engineer-in-Charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deemed to be included in the quoted rates

Supply only the following spare parts of Eicher vehicle as per original manufacture (Make:-Eicher/TVS):-

Centre bearing along with rubber

Universal cross

Yeok & teeth

Repair and overhauling of TATA Mobile/Xenon pick up Vehicle defective shafting system and checking of parts such as propeller shaft, centre bearing, centre bearing clamp & rubber, universal cross, yok teeth and testing complete all as specified and directed by engineer-in-Charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deemed to be included in the quoted rates

Supply only the following spare parts of TATA Mobile/Xenon pick up vehicle as per original manufacture (Make:-TATA/TVS):-

Centre bearing along with rubber

Universal cross

Yeok & teeth

Repair and overhauling of Eicher vehicle defective brake system and checking of parts such as wheel cylinder, master cylinder, wheel brake shoe, wheel brake spring system and testing complete all as specified and directed by Engineer-in-charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deemed to be included in the quoted rate.

Supply only the following spare parts of Eicher vehicle as per original manufacture (Make:-TVS Grilling):-

Wheel cylinder front right

Wheel cylinder front left

Wheel cylinder rear right

Wheel cylinder rear left

Master cylinder

Brake shoe (Front and rear side (Left & right)

Brake shoe spring & locking assembly

Repair and overhauling of TATA Mobile/Xenon pick up Vehicle defective brake system and checking of parts such as wheel cylinder, master cylinder, wheel brake shoe, wheel brake spring system and testing complete all as specified and directed by Engineer-in-charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deemed to be included in the quoted rate.

Supply only the following spare parts of TATA Mobile/Xenon pick up Vehicle as per original manufacture (Make:-TVS Grilling/TATA):-

Wheel cylinder front right

Wheel cylinder front left

Wheel cylinder rear right

Wheel cylinder rear left

Master cylinder

Brake shoe

Brake shoe spring & locking assembly

Repair and overhauling of Eicher vehicle defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin and complete all as specified and directed by engineer-in-charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included in the quoted rate

Supply only the following spare parts of Eicher vehicle as per original manufacture (Make:-EICHER/TVS/HINDUSTAN):-

Shock absorber Front

Shock absorber Rear

Shock absorber bush

Centre bolt

Hanger

Hanger bolt TVS

Hanger rear

Hanger Jhula

Shackle pins

Lock pin

Repair and overhauling of TATA Mobile/Xenon pick up Vehicle defective suspension system and checking of parts such as shock absorber, front spring leaf, centre bolt, front spring leaf hanger, front spring leaf, shackle pin, rear spring leaf, rear spring leaf hanger, rear shackle pin and complete all as specified and directed by engineer-in-charge. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included in the quoted rate

Supply only the following spare parts of TATA Mobile/Xenon pick up Vehicle vehicle as per original manufacture ( Make: TATA/TVS):-

Shock absorber bush

Shock absorber Front & Rear

Upper link

Lower link

Ball joint

Hanger

Shackle pin

Centre bolt

UJ Cross

Tie rod end,

Spring Leaf

Shackle plate with pin

Centre bearing

Centre bearing rubber

Centre bearing clamp

Yeok & teeth

Dismantling and taking down the gear box of Eicher, repair and overhauling including replacement of worn spare parts (spare parts shall be measured and paid separately) refixing the same in original position and testing complete. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Eicher vehicle as per original manufacture (Make:-EICHER/TVS):-

Gear liver kit

Synchronizer(1 the to 4th gear)

Gear reverse pinion

Gear pinion Ist, 2nd, 3rd & 4th and 5

Counter

Dismantling and taking down the gear box of TATA Mobile/Xenon pick up vehicle repair and overhauling including replacement of worn spare parts (spare parts will be measured and paid separately) refixing the same in original position and testing complete. Note : The rate for the minor parts required for repair other than the parts consider in the below is deem to be included.

Supply only the following spare parts of Tata Mobile as per original manufacture (Make:-TATA/TVS):-

Gear liver kit

Synchronizer(1 the to 4th gear)

Gear reverse pinion

Gear pinion Ist, 2nd, 3rd & 4th and 5

Counter

Taking out seat cover Front and back side of the vehicle Tata Mobile and replace the new seat cover stitching the worn out seat by filling seat materials of good quality and refixing the new one to their proper place neatly as directed. (including all material use for fixing.)

All as per item Ser.No. 58.00 here in before but driver and co-driver seat cover of Eicher vehicle

Scrapping out old painted surface of Vehicles Eicher and M/L for one coat of enameled paint over two coats of red oxide primer including repair to minor dents of vehicles, repairs to scratches, minor damage repair by welding and concerned polishing of vehicle complete all as directed

Supply only follwowing items:-

Brake Fluid

Steering Oil

Engine Oil Filter Suitable for Tata Mobile

Diesel Oil Filter Suitable for Eicher Vehicle

Engine Oil filter suitable for Eicher Vehicle

Diesel Oil Filter Suitable for Tata Mobile (207/207Di/Xenon)

Head Light Lamp Suitable for Eicher Vehicle

Head Light Lamp Suitable for Tata Mobile Vehicle

Parking Light Lamp Suitable for Eicher Vehicle

Parking Light lamp Suitable for Tata Mobile Vehicle

LED Fitting with accessories for suitable for Tata mobile Vehicle

LED Fitting with accessories for suitable for Eicher Vehicle

Side Mirror suitable for Eicher Vehicle (Left and Right Side)

Side Mirror suitable for Tata Mobile vehicle (Left and Right Side)

Hydraulic lift Jack 2 ton Capacity Trolley type

Washing soda

Electrolyte with PVC Container

Cleaning liquid for glass

Wiper blade suitble for Eicher Vehicle

Wiper blade suitble for TATA Mobile /Zenon Vehicle

Cleaning Brush

Vehicle cleaning liquid

Battery Terminals (Positive & Negative)

Battery Cables as per existing size and asper sample

Cotton waste

Multi Purpose grease

Car perfume as per requirement of flavour

Ignition Key Each Set suitable for Eicher vehicle and model

Diesel tank cap alongwith key Eicher vehicle and model

Head light assembly suitable for TATA mobile/Zenon make: Automative/Hindustan

Head light assembly suitable for Eicher vehicle make: Automative/Hindustan

Engine Oil 10W 30 Make: Castrol/HP/TATA

Air filter Suitable for Car Maruti Dzire

Air filter suitable for Tata Mobile/Xenon

Air Filter suitable for Eicher Vehicle

Comprehensive maint with material and servicing of the Car Washing plant installed at GE Saugor MTyard, Checking the serviceability of the plant oiling, testing of motor and belt, connecting wires and control starter replacement of belts, connecting wires as per manufacturer recommendation parts changing of car washing plant gun metal bushes, pressure gauge, connecting hose clips, gunmetal nozzles entire contract period and as per manufacturer recommendation and requirement of thecr washing plant complete all as directed by the Engineer-in-Charge.

Comprehensive maint with material and servicing of the Air Compressor installed at GE Saugor MTyard, Checking the serviceability of the plant oiling, testing of motor and belt, connecting wires and control starter replacement of belts, connecting wires as per manufacturer recommendation parts changing of Air compressure oil, air checking gauge and air nozzles, connecting hose clips, gunmetal nozzles entire contract period and as per manufacturer recommendation and requirement of Air compressor complete all as directed by the Engineer-in-Charge.

Taking down the damaged tarpaulin from Eicher vehicle and supply and wearing new water proof tarpaulin suitable for Eicher vehicle model 10.70/10.75 complete all as per direction given by the Engineer-in-Charge. Note : Quoted rate shall be deemed to be included for suitable hooks with nylon rope alongwith accessories in intervals. Make: Eicher/Supreme

Removing oily/dirty sand from POL Store near MT yard and cleaning the ground surface and supply and spreading river sand in the POL stroe for cushing of the Filled POL barrels complete all as specified and directed.

Removing wheel complete with tyre and tube, taking out tube repair, puncher of tube of vehicles Tata mobile/staff car and TATA zenon and refixing properly.

All as per item Ser.No. 66.00 here in before but Eicher Vehicle

All as per item Ser.No. 66.00 here in before but R/E bullet and hero honda

Disconecting the existing battery of capacity 12V 70 AH from the Vehicle, taking it to battery workshop, draining out the complete unserviceable sulphuric acid from the battery, filling up with new sulphuric acid to the required level, charging the battery, testing the battery for correct specific gravity, bringing back to the location, connecting toVehicle for satisfactory function all as directed by Engineer-in-Charge.

Repair and Overhauling of Clutch and transmission system of Motor cycle Royal Enfield and carry out the repair including replacement of Clutch plate, spring circlips, transmission chain, sproket Each Set etc complete all as specified and directed by the Engineer-in-Charge

Repair and Overhauling of Clutch and transmission system of Hero Honda spl +Motor cycle and carry out the repair including replacement of Clurtch plate, spring circlips, transmission chain, sproket Each Set etc complete all as specified and directed by the Engineer-in-Charge

M&L for denting damage portion of vehicle including touching, welding, matching with existing painting with the same color of any vehicle complete all as specefied and as directed.

Repair/Reconditioning of Engine cylinder head from Eicher vehicle by dismantling of engine head assy, rocker arm assy, inlet and exhaust valve etc., Transporting to private work whop, resurfacing of cylinder head assy including replacing of following items and lathe work & unloading, erection and testing, commissioning complete all specified and directed by Engineer in charge Note : Spare parts shall be measured and relevant items

Supply only following items:-

Head Gasket

In & Exhaust Valve

In & Exhaust Valve

Valve Guide

Repair/Reconditioning of Engine cylinder head from Tata Mobile vehicle by dismantling of engine head assy, rocker arm assy, inlet and exhaust valve etc., Transporting to private work whop, resurfacing of cylinder head assy including replacing of following items and lathe work & unloading, erection and testing, commissioning complete all specified and directed by Engineer in charge Note : Spare parts shall be measured and relevant items

Supply only following items:-

Head Gasket

In & Exhaust Valve

Minor Overhauling kit

Valve Guide

shubhanshu traders