Water Supply Schme Lola Dashmesh Nagar Block Tarsika District Amritsar under PRWSSIP 2a i and JJM

Amount

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Manual excavation and Including specials)

90mm o/d pipe of 6 Kgf. / sqcm

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Mechanically excavation and Including specials)

63mm o/d pipe of 6 Kgf. / sqcm

75mm o/d pipe of 6 Kgf. / sqcm

90mm o/d pipe of 6 Kgf. / sqcm

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

25mm G.I. Pipe

Dismantling of Cement Concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects.

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting and including restoration of roads to orginal Position.

Dismantling of interlock and relaying dismantled interlock including sand grouting complete in all respects.

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation ,stringing and jointing of pipe upto 160mm complete.

Providing proposed water connection to house hold up to wall with providing, laying jointing testing MDPE pipe lines 15 mm i/d with specials 2.00 mtr (Below GL) and ISI Marked G.I. pipe 15 mm i/d GM ferrule (As per IS:1239) B Class approved make2.50 mtr. (Above GL) including cost of special such as tees, bends, sockets, elbow, etc. cutting, threading and testing in trenches in the ground and ISI marked 15 mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock, 15 mm i/d as per IS: 210 with stainless steel spindle of approved make as per CSR 30.65 (b) complete in all respects. (Connection at Existing pipe line) 229 (Connection at New pipe line) 251

Repair of Pump Chamber

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (Grills in windows, Grills in ventilator, R.S. Joint on roof, Ventilator .etc)

White washing 3 coats inside of pump chamber. (Pump Chamber, Cub Board, Outside Window, Door Portion)

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade. (PC Wall outside, Front Window, Pillar Portion above parapet, Sides of Door, Parapet walls plaster Sides, Parapet Walls plaster top)

Providing and fixing 14 gauge MS sheet garage doors with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects. Door- 1x2.10 = 2.10 Window - 1x0.90x0.60 = 0.54

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

Providing and fixing of electric tube set of reputed make

Note:- 1. Item for which no rate or price has been entered in will not be paid for by the Employer when executed and shall be deemed covered by the other rates and prices in the bill of Quantities. (Refer ITB clause 4 (d) & GCC caluse 3.4) 2. Unit rates and prices shall be quoted by the bidder in Indian rupee. 3. Where there is a discrepancy between the rate in figures and words, the rates in words will govern. 4) Where there is a discrepancy between the unit rate and the line item total resulting from multiplying the unit rate by quantity, the unit rate quoted shall govern