REPAIR/MAINT TO INTERNAL ELECTRIFICATION, CEILING FAN AND CONNECTED WORK IN NP AREA AT AF STN GORAKHPUR

Amount

Taking down carefully (aluminum) point wiring complete of any type (batten/surface conduit or concealed) for light/fan/bell/socket/power point complete with all fitting such as switches, sockets, ceiling rose, round block regulator, lamp holder etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, FR PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with sunken type pressed steel terninal box 1.6 mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/ junction boxes and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, FR PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for one light point/fan point controlled by one switch

All as above but one 5 Amps socket point on same board with other switches

All as above but one 5 Amps switch socket outlet point on an independent board.

All as above but one bell point controlled by one 5 Amps bell push

All as above but One light point controlled by two Nos two way switch.

All as per item above but for point wiring for power point with 2.5 Sqmm (nominal area) PVC insulated copper cable 1100 Volt grade drawn through and including heavy duty PVC conduit ISI marked as required at site along with accessories with 1.5 Sq mm PVC insulated stranded copper conductor cable connected to common earth dolly with all accessories for 15 Amps socket point.

M&L Switch piano flush type single pole, one way 5 Amps 230 Volts AC circuit complete all as specified & directed.

M&L for socket outlet 5 Amps, 5 Pin flush type multipurpose, 230 Volts AC circuit complete all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, Single pole, two way.

M&L for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit complete all as specified and directed.

M&L Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified & directed.

Supply and fix electronic fan regulator 230V, stepped, socketed type complete all as specified and directed.

M&L for Ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed. Make : Anchor / Cona / Havells)

M&L for bell push 5 Amps 230 V, AC circuit complete all as specified and directed.

M&L for call bell ding dong 230 V AC circuit complete all as specified and directed.

Supply and fix Lamp holder, PVC/Polycarbonate type with back plate for batten fitting.

Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

S & F wall mounted batten integrated LED plastic channel with tube of capacity 20 Watt (4ft) 1.20 m, integral sleek extruded polycarbonate LED channel with white acrylic cover and integrated electronic driver complete fixed/connect properly at directed location. Model No. Bajaj LED Batten 20W CDL Plastic Make - Bajaj or equivallent in Havells/Philips/C&S

All as per item above but of capacity 9 or 10 watt (2ft) 0.60 m Model No. Bajaj LED Batten 9W CDL-I Make - Bajaj or equivallent in Havells/Philips/C&S

Supply and fixing wall mounted CITY-3 light fitting made up of polycarbonate with spiral B-22 base suitable for and including lamp LED 15 watt, fixed properly on wall surface and connecting complete as directed including taking out old one. Product code No. LHDL06160099 Make : Havells or equivallant in Philips/Bajaj.

Supply and fixing wall mounted decorative light fitting made up of high grade engineering plastic material suitable for and incl lamp LED 15 watt, fixed properly on wall surface and connecting complete as directed including taking out old one. Product code No. LHFHCHE1TL1W020 Make : Havells or equivallent in Philips/Bajaj.

Supply & fix energy saving new generation 10 watt LED, IP 65, Bulk head luminaire with opal diffuser all as directed including taking out old one. Cat No. LHEOAOP7UZ6W010 Make : Havells or equivallent in Bajaj / Phillips

Supply and fixing Bldg security light fitting energy saving with pressure die-cast housing IP-65 luminaire, prismatic polycarbonate diffuser with secondary optics high power LED as light source with toughened glass 30 Watts including all connections complete all as specified and directed. Cat No. BCLST 30W LED I Make - Bajaj or equivallent in Havells/Philips/C&S

All as per Item above but Bldg security light fitting energy saving with pressure die-cast housing IP-66 protection secondary optics, individual high power LED of capacity 120 watt with toughened glass including all connections complete all as specified and directed. Cat No. BRTFG 120W LED Make - Bajaj or equivallent in Havells/Philips/C&S

Supply & fixing in replacement of unserviceable with new G I pipe bend to shape 1.2 Mtr (32/40 mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on pole all as directed.

Supply & fixing with new LED flood light fitting with energy saving with secondary optics made in pressure die cast housing with heat sink and aluminium extrusion with IP-66, long life with high power LEDs of capacity 120 watt, mount properly on wall surface with the provisioning of suitable sizes of MS clamps, nuts, bolts, washer and masonary work incl connecting/testing complete all as directed at site. Cat No : BARFEG 120W LED Make - Bajaj or equivallent in C&S/Havells/Philips

S&F Recess mounted LED downlighter elegantly designed pressure die-cast Al. heat sink for efficient heat dissipation and separate replaceable electronic driver 21 Watts (5700K) with diffused optics fixed properly in false ceilling and connecting complete. Cat Part No. LHEBJNP7IZ1W021 of Havells or equivallent in Philips/Bajaj.

Supply and fixing Recessed mounting 2'x2' LED 43 Watts, 5700K, panel light for dust-free installation, white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover etc fixed properly in false ceilling / POP ceilling of suitable reqd dimensions and connecting complete. Make : Bajaj Cat Part No : BZRSQL 43W GZ1 WH/CW or BARSQL 43 WH equivallent in Philips / Havells/C&S.

All as per Item No 29 above but Surface mounting 2'x2' LED 36 Watts, white powder coated CRCA housing with high efficacy LEDs aluminium front frame with flat white high transmission acrylic cover etc fixed properly at directed location and connecting complete. Make : Bajaj Cat Part No : BCTBLS 36 ZT WH or equivallent in Philips / Havells / C&S.

Supply and fixing surface and recessed mounting 'Skylux' LED light fitting of size 4 feet x 1 feet and capacity 36 watt, fixed properly on wall & ceilling surface as directed and connecting complete. Note :- Cutting of space for fixing/mounting of recessed mounting fitting shall deemed to be include in this item of work. Cat Part No. BZSSLL 36W WH (for surface mounting) & Cat Part No. BZRSLL 36W GZ1 WH (for recessed mounting) Make : Bajaj or equivallent in Philips or Havells

Supply and fixing Square Shape Integral decorative LED bollards with IP 65 degree of protection of capacity 9 Watt LED with all accessories complete errect / fixed / mount properly at directed place with reqd fixing/mounting arrangement and connecting/testing complete all as directed. Make : Bajaj Cat No. BGBOS 600 9W LED or equivallent in Philips / Crompton Greaves/Havells/C&S.

Supply and fixing post top lantern light fitting 30W LED made in die cast aluminium housing with decorative opal acrylic diffuser and IP65 protection, fixed properly at directed location with provisioning of suitable dia of GI pipe of length not less than 30 Cm in which half portion shall be grouted in existing gate piller incl reqd mason work and connecting/testing complete. Model No. BGCT W4 LED WW LED of Bajaj or Model No. LTGLC30WHPLED/W of C&S or equivalent of Philips / Crompton Greaves / Havells.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in soft/loose soil for laying of pipes all as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified.

Material and labour for sand cushioning for under ground cable 8 cm before laying the cable and 15cm after laying and stretching the cable complete all as specified.

Material and labour for sub class 'B' bricks well burnt old size designation 75 laid dry flat for protection of cable .

Labour only for horizontal boring below pavement of taxi track / runway / road, in soft/lose soil for crossing up to 50 mm bore G.I pipe lines all as per directed.

Material and labour for 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc, complete all as specified and directed including clamps, nut, bolt and washers.

Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volt grade of size 10 Sqmm 4 core including connecting/testing and taking out old unserviceable cable etc complete as directed.

All as per Item above but of size 6 Sqmm 2 core.

Taking down old and unserviceable aluminium conductor sub main wiring of 2/3 runs or main-wiring or twin core flat cable of any sizes from any position including wood batten, PVC conduit, steel conduit, PVC Casing caping etc all as directed and making good disturbed surface of wall ceiling etc.

M&L for concealed sub main wiring using two single core FR PVC insulated, unseathed stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including PVC conduit of dia not less than 25mm with all fittings and accessories, along with one run of FR PVC (green colour) insulated , unsheathed, stranded copper conductor of size 4.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core FR PVC cable with one run of earth conductor and conduit shall be measured as one unit)

All as per Item above but sub main wiring using two single core PVC insulated, unseathed FR multi stranded copper conductor cable of size 4.0 Sqmm with one run of FR PVC (green colour) insulated, unsheathed, FR multi stranded copper conductor of size 2.5 Sqmm as earth etc continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

M & L for PVC insulated and PVC sheathed aluminium stranded conductor service cable of size 6.0 sqmm twin core (Flat), fixed properly at directed location and connecting complete. Make : Plaza/Havells

Taking down old and u/s MCCB DBs / MCB DB / Main Switches including MCBs/MCCBs/ Isolaters, from wall surfaces all as specified and directed. Note : Any disturbed surfaces of wall will be matched properly as the existing colour surfaces.

Supply and fixing factory made epoxy powder coated distribution board double door TP & N 4 ways vertical type MCCB DB, with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100/125 Amps as incomer complete all as specified and directed.

Supplying & fixing MCCB, 4 pole, 100 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified.

Supplying & fixing MCCB, 4 pole, 125 Amps, 16 KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board SPN 2 way without busbar complete all as specified and directed.

Supply and fixing factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.

All as per item above but DB SPN 8 ways.

All as per item above but DB SPN 12 ways.

Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 40 Amps capacity IP-20 complete all as specified and directed.

Supply and fixing MCB single pole 240 volt C curve 10 KA 5-30 Amps capacity IP-20 complete all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket (Metal clad) 20 Amps complete with one single pole MCB 20 Amps capacity.

Supply and fix in repl of u/s and broken with new Ventilating Fan plastic body, 250 mm sweep, single phase, 230 Volts AC, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing complete. Model No : Ventil Air-DX WHT/BLK Make : Havells or equivallent in Bajaj/Crompton.

Repairing of unserviceable light point (normal/flameproof), Fan point, socket point 5A/15A, switches sockets, fan regulator, light fixtures any type lamp any type MCB DB's & all electrical accessories in day to day/door to door maintenance and making it serviceable in all respect with replacement of any major part but including small length of wires (not more than 50cm) adhesive cable and other connected minor accessories by providing sufficient and skilled manpower. Work shall also include to check & removal of current leakages in houses and any urgent nature of work as and when directed. The scope also include cutting of existing Bakelite sheet to accommodate new electric fittings/fixtures like switches, sockets, fan regulators etc. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum 03 complaints in working hours between 0900 AM to 0500 PM in NP area by engaging one electricial and one helper (b) The contractor or his representative will take complaint from MES complaint Register through MES job card (c) The contractor will made seperate items register with location and signature of user (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk factor & security pass will be the contractor's end (g) Material will be measured and paid separately in the relevant item here after. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at NP area complaint cell (at Sub Stn No 7), after completing their daily Job Cards, as well as during off working hours / Night / Sunday / Holiday.

All as per Item above but for attending the electrical complaints during off working hours / Night / Sunday / Holiday. Note :- (a) The rate quoted by the contractor for Each Job is deemed to be included consisting of minimum one complaints between 1700 hrs to 2200 hrs in NP area by engaging one electrician. (b) The contractor or his representative will take complaint from MES complaint Register through MES job card (c) The contractor will made seperate items register with location and signature of user (d) The contractor will maintain complete details of Job cards (Working/Off working hours) and items involved with date and user signature (e) The ladder and T&P as required will be provided by the contractor (f) Risk factor & security pass will be the contractor's end (g) Material will be measured and paid separately in the relevant item here after. (h) All supply material shall be deposited by contractor in MES store yard and issued in every Job Card as per requirement. (j) The tradesmen should be available at NP area complaint cell (at Sub Stn No 7), after completing their daily Job Cards, as well as during off working hours / Night / Sunday / Holiday.

Supply only electronic fan regulator 230 V, electronic rotary 1 module.

Supply only switch piano flush type single pole, one way 5 Amps ISI Marked.

Supply only switch piano flush type, 5 Amps, Single pole, two way.

Supply only Modular switch, 6 Amps, Single pole, one way.

Supply only Modular switch, 16 Amps, Single pole, one way.

Supply only Modular socket outlet, 6 Amps, 2 & 3 pin.

Supply only Modular socket outlet, 6/16 Amps,

Supply only Modular bell push switch, 6 Amps, Single pole.

Supply only switch socket combination multipurpose 5 pin 5/15 Amps

Supply only switch socket combination multipurpose 5 pin 5 Amps

Supply only Lamp holder insulated body with back plate for batten fitting, ISI marked.

Supply only power saver electronic ballast 36/40 watt.

Supply only power saver electronic ballast 11/13/18 watt.

Supply only CFL pin type 2 & 4 pin 11 to18 watt 240 volts.

Supply only CFL 2 pin (Tutor) cross pin 13/18 watt 240 volts.

Supply only CFL pin type 4 pin 36 watt 240 volts.

Supply only Starter for tube light 36/40 watt, 240 volts.

Supply only LED tube rod 18/20 watt (4ft), 240 volts

Supply only lamp LED 9/12 watt, 240 volts.

Supply only tape insulation, 1100 volts grade 20mm width, 15 mtrs long

Supply only electronic ballast suitable for 2x36 watt CFL, 230 volts, AC

Supply only single Run of single core PVC insulated unsheathed cable of size 2.5 Sqmm, FR copper stranded conductor.

Disconnecting, taking down & removing carefully the existing ceiling fan, exhaust fans, wall bracket fans, air circulating fans and pedestal fans etc. of any description, any sweep and from any position / locations for repairs / servicing / numbering etc., dismantling & opening of the fans, checking serviceability of parts, overhauling by necessary cleaning, oiling & greasing , fixing the serviceable parts in position, removing & replacement of defective/ unserviceable parts, if any, with new parts, reassembling the fans, making necessary adjustment and proper alignment of blades, hanging / fixing the repaired fans in position, connecting to existing electric sources and testing at site to the entire satisfaction of engineer-in-Charge etc complete all as specified and directed. Note :- (i) The replacement of defective / non functional parts shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing charges for new items are deemed to be included under this item. (ii) Burnt out windings replaced, shall be measured and paid for separately under appropriate item. (iii) The rates for above items are deemed to include transportation charges from E/M store yard to workshop and vice versa.

Taking out & removing of old burnt-out windings of electric fans of any description and rewinding of fan motor with appropriate size super enameled copper wire. Make : Atlas/Finolex/Devi Dayal, as approved by the Engineer-in-charge including insulating material such as illuminous paper, Letherized paper, cotton tape, glass sleeving, insulating varnish etc testing at workshop and transportation to site, connecting and testing on full load to the entire satisfaction of Engineer-in-charge for the following Fans :- (a) Rewinding of motor of ceiling fans 200 gram approx copper wire 1200/1400 mm sweep.

All as above but exhaust fans of 225/230 mm sweep with 170 gram approx copper wire.

All as above but exhaust fans of 300/375 mm sweep with 200 gram approx copper wire.

All as above but exhaust fans of 450 mm sweep with 250 gram approx copper wire.

All as above but wall mounting air circulator fan of 450 / 400 mm sweep, single phase, 230 Volts AC with 300 gram approx copper wire.

All as above but air circulating fan (Ferrata) of 610 mm sweep, three phase, 440 V, AC with 400 gram approx copper wire. Note : For Ser No 84 to 89 :- Rate quoted will includes taking down and refixing of fan at site.

All as above but motor of pedestal fan of 400 mm sweep with 250 gram approx copper wire.

Supply only gun metal ball bearing No 6200 to 6203 of any description and size to fan. Make : SKF/NBC/TATA

Supply only gun metal bushes of any description and size to suit existing motor shaft of fan. Make : SKF/NBC/TATA

Supplying only capacitor of capacity 2.5 mfd (PVC body) (Make :- Havells/Bajaj/Usha)

Supplying only capacitor of capacity 3.15 mfd (PVC body) (Make :- Havells/Bajaj/Usha)

Supplying only capacitor of capacity 4/6 mfd (PVC body) (Make :- Havells/Bajaj/Usha)

Supplying only complete hanging assembly set comprising with rubber reel, MS clamps, nuts, bolts with one lock hole and lock pins suitable for any type of fans & down rods.

Supply only PVC insulated, flexible cable, twin core twisted of size 23/0.0076 with copper conductor in pieces for connecting fans.

Supply only 300mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified.

Supply only 900mm long down rod 15 mm dia, MS tube light grade, duly finished with powder coating of white colour, including necessary holes and threading etc. complete all as specified.

Taking down existing worn out louvers of any description, in any position and supplying and fixing new louvers made out of MS sheet 22 gauge thick suitable for exhaust fan of 230/300mm sweep all as specified & directed. Note : The louvers shall be of same shape, size and pattern as existing duly painted with two coats of synthetic enamel paint over a coat of red oxide primer.

All as per item above but suitable for exhaust fan of 450 mm sweep

M & L for painting of existing fans of any description/sizes ceiling fan/exhaust fan/Air circulators/Wall mounted fans/Pedestal fan) with applying one coat of synthetic enameled white colour paint by spray machine including writing MES No. on fan body with black paint all as specified and directed.

M/S UJJAWAL ENTERPRISES

Unitech India

Vijay Electricals

M/ s J S Kapoor And Sons

M/s Aparna Associates

Pioneer Engineering works

M/S SHAILZA TRADERS

m/s allied enterprises

M/S ARORA CONSTRUCTION

M/S SHANKER TRADERS

M/S UJJAL ASSOCIATES

G M CONSTRUCTION COMPANY