Constructing of permanent pump house at RD. 35000-L of Kaithal disty in village Jadola

Amount

Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manualmeansinfoundationtrenchesordrains(notexceeding1.5minwidthor10sqmonplan),includingdressingofsidesandrammingofbottoms,liftupto1.5m,includingetting out the excavated soil and disposal of lus excavated soil as directed, within a lead of 50 m. (HSR 4.14.1)

2. Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for lain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. M-15 grade plain cement concrete (cement content onsidered HSR item No.6.22 (2.2)

CC 1:3:6 with stone aggregate 20mm size in foundation & plinth HSR item No. 6.1.4.

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in : Cement mortar 1:3 (1 cement: 3 coarse sand) Cement mortar 1 :3 (1 cement : 3 coarse sand). Cement mortar 1 :4 (1 cement : 4 coarse sand). (HSR 7.22.1+7.8-7.9)

5. Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works up to plinth level HSR item No.6.25 (1)

Tile brick masonry work 5 cm thick with common burnt clay non modular tile bricks of class designation 1 O in cement mortar 1 :3 (1 cement: 3 coarse sand) in superstructure above plinth and up to floor four level. (HSR 7.35)

Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 10.9)

Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge. Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter .(HSR13.21.2)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISi marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately} (HSR 12.7.2.1)

Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) 40mm thick (HSR 6.8.2)

12 mm cement plaster of mix, 1 :3 (1 cement: 3 fine sand) (HSR 11.5.2)

Pointing on brick work or brick flooring with cement mortar 1 :3 (1 cement : 3 fine sand): Raised and cut pointing (HSR 11.25.2)

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. Wiring for Light/Fan/call bell point with modular type switch/socket and box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated conductor cable in 1.6 mm thick PVC conduit pipe (HSR 23.4.1)

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. Wiring for Light/Fan/call bell point with modular type switch/socket and box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated conductor cable in 1.6 mm thick PVC conduit pipe (HSR 23.4.1)

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required (HSR 23.4.4.1)

PVC insulated copper conductor wiring 1.6mm thick conduct pipe. Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required (HSR 23.4.5)

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. (HSR 30.24)

Structural steel such as tees, angles channels and R.S. joists. Hoisting R.S.Joists and placing in position up to floor IV level (HSR B0942+9.8)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. (HSR 11.77)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 11.78)

Planking of commercial hard wood, such as Hollock, champ, chikrassy and chaplash etc., (Non-coniferous timber other than teak conforming to I.S. specification no.1003 kiln-seasoned) planed on both sides, rebated and fixed in position, including nails and screws, etc: 50 mm thick (HSR 12.24.1)

Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied (HSR11.93)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , xcluding overlaps. Wastage, overlaps, couplings, welded joints,acer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Cold twisted bars (HSR 6.33.3)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.. HSR (4.33)

Providing and laying dry brick on edge flooring in equired pattern with bricks 104 426 531of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.. HSR (10.34) HSR (10.34)

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single eted pipes. 110 mm diameter (HSR 9.57.2)

Supply and erection of straight through joint cable joining kit 1.1 KVA grade. HSR (24.2.9.4)

Providing and fixing aluminium sliding door bolts, ISi marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete HSR (12.98)

Center and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached plasteres butteresses, plinth and string corses etc. HSR No. (6.30.3)