ADDN / ALTN TO UNIT GYM AT BLDG NO P-238 AT WKSP AREA AND ADD / ALTN TO TEA ROOM AND NEARBY PASSAGE, FLOSSING, TILING, GRANITE, SLAB ETC AT WKSP AREA UNDER GE MINNIEBAY, SRI VIJAYA PURAM

Amount

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.

All as per item 1.00 here-in-above but not exc 1.5 sqm each, complete all as specified and as directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples ®complete all as specified and as directed.

S&F for 6 mm thick exterior quality ACP (Aluminum Composite Panel) Sheet, finshed with approved metallic colour as background( colour approved by depatment) and fixed in Aluminum door frame with screws or any necessary arrangements like EPDM guske, cleat,angle screw etc complete all as specified and directed.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in- charge. all as specified and directed (Weight not less than 3.26Kg/Sqm)

S& F for ordinary quality sheet glass 4.00 mm thick in square n.exc.0.50 sqm in each pane complete all as specified and as directed.

S&F for Figured glass 4.00mm thick , pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing of complete all as specified and as directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing of complete all as specified and as directed.

M&L Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for demolition of RCC suspended work [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L 20 mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.

Providing and fixing cupboard shutter with 18-19mm thick one side decorative and other side balancing lamination factory pressed WPC CELLECUKA BOARD 710 of approved brand with 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.

Providing and fixing Stainless steel heavu duty pull out Cutlery Basket of size 21"X20"X4" of garde 304 all as specified and directed by Engineer in charge

Providing and fixing Stainless steel heavu duty Plain pull out Basket of size 21"X20"X6" of garde 304 all as specified and directed by Engineer in charge

Providing and fixing Stainless steel heavu duty pull out side bottle Basket of size 6"X20"X20" of garde 304 all as specified and directed by Engineer in charge

Providing and fixing 200 mm long stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make long with screws etc. complete as per directions of Engineer in-charge.

Providing Heavy Duty Modular Kitchen Cabinet Door Lift Support Hydraulic Mechanism/Accessories complete all as specified by Engineer-In-Charge

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge.

Providing and fixing Stainless steel heavu duty Plain plate Basket of size 21"X20"X6" of garde 304 all as specified and directed by Engineer in charge

Taking down 15/20mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store.

Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 fittings on walls /ceilings or laying in floors complete all as specified. (Note: Brass fittings measured in Running length) of complete all as specified and directed by Engineer in charge

S&F for 15 mm dia for of Brass CP mixer for mixing hot & cold water screwed down (swan neck mixer ) for SS sink (Hindware, Parryware, Jaguar make) or other approved equivalent make complete all as spd as per directions of Engineer- in-charge

S&F in repairs 15 mm dia Stop cock chromium plated fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/CPVC pipe or for unions and fixed all as directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises of complete all as specified and as directed.

M&L for joint free coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) of complete all as specified and as directed.

All as per item 34.00 here-in-above but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) of complete all as specified and as directed.

M&L for joint free, Vitrified Ceramic tiles of size 600x600mm, 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per item 36.00 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4, of complete all as specified and as directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with water tank on top of roof/slab of bldgs, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of stainless steel sink, 1.00 mm thick for kitchen with plug, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 550 mm x 450 mm with approx bowl size of 500 mm x 375 mm x 200 mm etc, complete all as directed. Make : Prayag / Blue Star / Pearl

S&F in replacement of stainless steel kitchen plate rack made out of imm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed. Make - Nirali / Prayag / Blue Star / Pearl

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil of complete all as specified and directed by Engineer in charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5M complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

M&L PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Surface excavation over Hard/ dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil of complete all as specified and directed by Engineer in charge

M&L for sand cushion over sub base ,complete all as specified and directed by Engr-in-Charge

M&L 100 mm Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) for pavement of pathway of complete all as specified and directed by Engineer in charge

M&L for Machine pressed precast conctete interlocking paver block any shape with grey cement with pigment and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of complete all as specified and directed by Engineer in charge

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges of complete all as specified and directed by Engineer in charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

M & L for Preparation of New or previously untreated concrete surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of primere complete all as specified and as directed.

M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 of complete all as specified and directed by Engineer in charge

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment confirming to Fe 410 -W (Gde- E- 250) quality- A of complete all as specified and directed by Engineer in charge

S & F for Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long of complete all as specified and directed by Engineer in charge

Dismantling Asbestos Cement/Galvalum/MS Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwsof complete all as specified and directed by Engineer in charge.(Note : Height of the bldg up to G+3 storey including necessary safety arrangements)

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing of complete all as specified and directed by Engineer in charge.( Note : Height of the bldg up to G+3 storey including necessary safety arrangements)

M & L for Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as secified and directed by Engr-In-Charge.(on truss work & new pressed steel frame)

M&L for rendering 5mm thick plaster in CM (1:4) over a backing coat of 10 mm thick in CM 1:6 (Total 15 mm thick ) on concrete or block masonry surfaces including mixing water proofing compound on top layer as per manufactures instructions(or 3% by weight of cement) and finishing the top surfaces even and fair complete all as specified and as directed. Note :Water proofing compound shall be measured and paid seperately under relevant item of this schedule as supply only ".

Supply only water proofing compound ISI marked complete all as specified and as directed.( Note : WPC may apply as per manufactures instruction or 3% by the wt of cement)

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified.

Material & Labour for point wiring with two single core PVC insulated and unsheathed 1100 volts grade cable multistranded copper conductor of size 1.5 Sqmm nominal area(FRLSH) drawn through & including non metallic rigid PVC conduit, medium duty not less than 20 mm dia concealed in wall/fixed on wall/ceiling with GI saddles , GI screws , rawl plugs with all fittings including tees , junction boxes & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable copper solid conductor of size 1.5 sqmm(FRLSH) complete all as specified and as directed. Note:- (i) The rates are inclusive of GI metal flush box not less than 1mm thick and modular cover plate with frame for mounting modular switch. (ii) Cutting of chasis in wall/floor beam to be concealed conduit and make good the surface is deemed to be included in the above rates (iii) Wiring resistance insulation shall be recorded and test sheet shall be submitted by the contractor.

One light point controlled by one one way switch complete all as specified and as directed.

One ceiling/exhaust/wall fan point controlled by one switch complete all as specified and as directed.

One 3 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

One 3 pin socket outlet 5 Amps on independent board with other switches complete all as specified and as directed.

Material & Labour for point wiring with two single core PVC insulated and unsheathed 1100 volts grade cable multistranded copper conductor of size 4 Sqmm nominal area(FRLSH) drawn through & including non metallic rigid PVC conduit, medium duty not less than 20 mm dia concealed in wall/fixed on wall/ceiling with GI saddles , GI screws , rawl plugs with all fittings including tees , junction boxes & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable copper solid conductor of size 4 sqmm(FRLSH) complete all as specified and as directed. Note :- Cutting chasis in wall/floor beam to be concealed conduit and make good the surface is deemed to be included in the above rates.

Supply & fixing modular switch one way, 6 Amps, 1 module, 240 volts complete all as specified and as directed

Supply & fixing modular switch one way, 16 Amps, 1 module, 240 volts complete all as specified and as directed.

Supply & fixing modular socket, 2/3 pin, 6 amps, 2 module complete all as specified and as directed.

Supply & fixing modular socket, 2/3 pin, 6/16 amps, 2 module complete all as specified and as directed.

Supply & fixing ceiling Rose, 3 terminal polycarbonate isolated body complete all as specified and as directed.

Supply & fixing LED lights fitting 1x 20W, 4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm 40 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply & fixing ceiling fan 1200mm sweep with blades, down rods and connected accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, 5 star rated, equipped with brushless direct current motor (BLDC) including remote controlled electonic regulator as per OEM design & provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply & fixing exhaust fan metal body, AC, single phase, 230V, 300mm sweep complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastner including making hole to the wall surface of any type/girth and at any height for fixing of exhaust fan including making good disturbed surface with existing wall colour and provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply & fixing electric water heater, storage type steel body with element free induction heat transfer technology through induction coil capacity 25 litre, BEE 5 Star rated with reduction heating time 10-12 mins and with digital temperature display, live temparature with smart mode , automatic operation of water heater for on and off time complete with all accessories such as safety valve, thermostate, NRV, connection piece, fastner bolts including stainless steel hose pipe complete all as specified and as directed.

Supply and fixing GI bracket, light grade 25 mm dia and upto 90 cm long including two numbers GI clamp fixed on wall with necessary fixing arrangement complete all as specified and as directed.

M&L for concealed / surface with cassing and capping submain wiring with PVC insulated unsheathed multi-stranded copper conductor cable two run of 1.5 Sqmm single core (FRLSH) 1100 volts grade drawn through in and including non metallic rigid PVC conduit, medium duty not less than 25 mm dia concealed in wall/fixed on wall/ceiling with GI saddles, GI screws, rawl plugs with all fittings and one run of 1.5 Sqmm PVC insulated copper conductor(FRLSH) for earth continuity wire for fixing of Security Lights complete all as specified and as directed. Note : Two run of single core cable with one run of earth continuity conductor and PVC conduit and its fittings will be measured as one length. (ii) Rates are deemed to be included for chases of conduit, cutting and making holes in wall/floor for passing in or through conduit and making good disturbed surfaces with existing wall colour complete

Supply & fixing of LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 3000 lumens and suitable wattage for system efficiency not less than 120 lumens/Watt, having secondary optics, min wattage 25 watt, with ingress protection IP 65/66 and potted electronic driver of minimum IP 67 with THD less then 10%, CRI > 80, P.F> 0.9, IK> 08, SPD of capacity 5 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed by Engineer-in-Charge. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items

Supply and fixing MCB DB TPN 4 way IP-43 made of sheet steel phos phatised, powder painted with copper bus bar 100A, neutral link, earth bar and Din rail 415 Volts with double door with provision for MCB TPN as incomer and SP MCB as outgoing .

Supply and fixing MCB DB SPN 8 way IP-43 made of sheet steel phos phatised, powder painted with copper bus bar 100A, neutral link, earth bar and Din rail 415 Volts with double door with provision for MCB SPN as incomer and SP MCB as outgoing . Note for item No 78.00 & 79.00 : (i) MCB will be measured and paid separately. (ii) The cost for flushing of Distribution box in any type of wall and making good disturbed surfaces with existing colour shall be deemed to be included in the quoted rate

Supply and fixing MCB RCBO 4 pole 32 Amp of rating, 50 Hz, 415 V with rupturing capacity 30 mA complete all as specified and as directed by Engr in Charge.

Supply and fixing MCB SPN 6 to 32 Amps ,10 KA, C Curve, 230 Volts ,50 HZ complete all as specified and as directed.

Supply and fixing MCB SP 6-32 Amps ,10 KA, 'C' Curve, 230 Volts ,50 HZ and current carrying cpacity in the MCB DB complete with connction testing and commissioning all as specified and as directed..

Supply and fixing Distribution board, modular cover plate with frame, MCB SP 20 Amps 'C' Series, 10 KA protected Socket, Heavy brass 3 pin Plug top with sheet steel enclosure complete all as specified and as directed.

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point complete

M/s Harjas Construction & Waterproofing Co (BID ID -3323070)

Sri Ram Construction (BID ID -3316086)

SKY GROUP (BID ID -3316561)

ANDAMAN PAINTS PVT LTD (BID ID -3315517)

Allied Trading Company (BID ID -3315646)