ELECTRIFICATION WORK AGAINST SANCTIONED PACKAGES UNDER BUSNIESS PLAN IN THE AREA OF EUDD-2 ALIGARH

Amount

Safe carriage of following S.T Poles/ PCC Poles from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the repective ends.

11 Mtrs. long S.T.Pole

8.5/9.0 Mtrs. long PCC Pole

Safe carriage of line material viz. Conductor, G.I. Earth Wire, Cross Arm, Angle, Channel, Insulators, Clamps & other material from store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends.

Erection of following single support including fixing complete HT/LT fittings as per RESSPO Munual including the cost of labour, T&P and carrier etc. required for proper completion of work.

11 Mtrs. long S.T.Pole

8.5 Mtrs. PCC Poles

Grouting of single support as per RESSPO Manual including of the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc.

11 Mtrs. long S.T.Pole

8.5 Mtrs. PCC Poles

Erection & grouting of 11 Mtrs. ST double pole with help of 01 No. exsiting ST Pole including fixing complete HT/LT fitting as per RESSPO Manual including the cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc.

Laying sagging stringing and binding of ACSR Dog Conductor on the newly erected pole as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work.

Laying spreading, lifting and final sagging of Aerial Bunched Cable size 3x50+1x35+1x16 sq.mm. including fixing of all accessories as per RESSPO Manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. :

Laying spreading, lifting and final sagging of Aerial Bunched Cable size 3x120+1x95+1x16 sq.mm. including fixing of all accessories as per RESSPO Manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc. required for proper completion of work. :

Erection and grouting of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of all grouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual.

Fixing & connecting of earthing rods as per RESSPO Manual including the cost of labour, T&P etc. required for proper completion of work.

Fixing of LT Distribution box including making connections of distribution box with LT mains by piercing clamps for Aerial Bunched Cable.The work will also include the opening of the service connection of the consumer and its connecting in distribution box.

After opening of HT & LT Connections, dismentalling of 250 KVA Distribution Transformer from double pole /plinth and its safe carriage from respective site to other site and placement on the Plinth including proper jumpering from 11 KV TPMO to the transformer and also connecting the LT site cables including loading & unloading at the respective ends as per RESSPO Manual.

After opening of HT & LT Connections, dismentalling of 250 KVA Distribution Transformer from double pole /plinth and its safe carriage from respective site to Store including loading & unloading at the respective ends as per RESSPO Manual.

Safe carriage of 400 KVA Distribution Transformer from Electricity Store Centre, Sarsol/Workshop, Jalapur or from any other place to the respective site of work including loading & unloading at the respective ends and mounting on double pole / placement on the Plinth including proper jumpering from 11 KV TPMO to the transformer and also connecting the LT site cables as per RESSPO Manual.

Fabrication of Top Channel as per RESSPO Norms.

Fabrication of Dropper Channel as per RESSPO Norms.

Fabrication of T/F Base Channel/Angle as per RESSPO Norms.

Fabrication of V type Cross Arm as per RESSPO Norms.

Fabrication of F-Braket as per RESSPO Norms.

Fabrication of Guarding Angle as per RESSPO Norms.

Neutral & body earthing of Distribution Transformer by digging of pit upto water level depth (approx. 125 feet) and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms.

Construction of plinth at various 11/0.4 KV Sub-station suitable for distribution transformer having size 5’x 5’ x 5’ out which 2’ below the ground. Work will include digging of foundation 2’ deep & brick work with Ist class bricks having cement and sand mortar of ratio 1:6 on all the walls, each of 9” thickness. The area inside the wall shall be duly filled by mud up to the height of appropriate level from ground level and shall be duly watered & rammed. Above the filling C.C. of ration 1:6:12 (Cement sand and brick ballast) giving 4” layer shall be provided. Above C.C. layer RCC layer having 4” thickness and with ratio 1:2:4 of cement sand and stone ballast shall be provided Re-enforcement shall be provided by providing net of (8 Nos. + 8 Nos.) M.S. rods of size 10 mm dia and each of 5’ length in the middle of the top of C.C. layer. The plinth shall be plastered with 12mm thick plaster in ratio 1:4 at all sides. This work will include cost of labour, T&P and all material required for construction of plinth which shall be provided by the contractor as per RESSPO Norms.

Providing and fixing of welded wire mesh fencing around transformer plinth with M.S. Angle of size 35X35X6 mm. length and 1.20 Meters height, such panels shall be supported on M.S. Angle from of size 40X40X6 mm. having 04 Nos. corner supports of height 1.65 Meters including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc. for locking the arrangement as per drawing and specifications the fencing will be painted one coat of red oxide primer and then two coats of bus green synthetic enamel paint. The rates should be inclusive of all materials required for proper completion of above work (length of each fencing approx. 11 Meters)

Safe carriage of 11kV XLPE HT Cable from Store Centre, Sarsol to the respective site of work including the work of its loading & unloading at the respective ends.

Laying of 11kV XLPE HT Cable including making proper connections with Transformer LT side and LT line. The work includes the cost of labour, T&P and carrier etc. required for proper completion of work.

Guarding of 11 KV line as per RESSPO Norms

Dismentling of old & used Pole /Rail form exsiting line and its safe carriage from site to store as per RESSPO Norms.

Dismentling of old & used ACSR Weasel Conductor form exsiting line and its safe carriage from site to store as per RESSPO Norms.

P K ENTERPRISES

K.D. (INDIA)