Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.5 CrAccepted-AOC | ₹45.5 Cr Quoted ₹46.0 Cr | L1 | Accepted-AOC Accepted |
| 2 | L2₹47.3 CrRejected-Finance | ₹47.3 Cr | L2 | Rejected-Finance Disqualify |
| 3 | L3₹49.8 CrRejected-Finance HARSH ANAND YEVALEKAR MALA COLLEGE ROAD NASHIK 422005 | NASHIK | NASHIK | MAHARASHTRA | 422005 | ₹49.8 Cr | L3 | Rejected-Finance Disqualify |
Tender Value
Refer Docs
EMD Value
₹40 L
Closing Date
16 Oct 2023, 5:00 pmClosed
Chief Executive Officer
Shri SaiBaba Sansthan Trust Shirdi.
Proposed Interior Work, Indoor And Outdoor Sport Field, HVAC Work and Miscellaneous Civil And Electrical Work Of Sai Baba Educational Campus At Gat No-183, Nimgaon Korhale, Tal-Rahata, Dist- Ahmednagar for Shri Sai Baba Sansthan Trust Shirdi.
2023_SAI_945387_1
SSST/ Construction/ 2023/95/Furniture And Other
Open Tender
Civil Works
180 days
Shirdi
Please Refer Tender Document
7 documents required · 7 mandatory
₹3,540
₹40 L
Sai Sabhagruha
24 Feb 2024
16 Sept 2023
18 Oct 2023
16 Sept 2023
16 Oct 2023
29 Sept 2023
26 Sept 2023
Amount
FURNITURE WORK
Notice Board: Providing and fixing wall mounted type modular notice board (Rectangular Shape) with all necessary hardware, fixture and fittings WRITING BOARD LAMINATED BLACK/ GREEN NON MAGNETICMade of al beeding frame with black writing laminate & back side covered with laminate of approved make etc. complete. As directed and approved by architect . size of board is 1200X900
Cubicles: Providing and fixing PANEL BASED VIBRANT PLUS (LINEAR) 1500 x 1500 x 600D x 740H, PANEL HT. 1200MM (60MM THK.) Frames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity. Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims All the frames are fastened together by means of M6 NUTS & BOLTS . All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color. All the frames are fitted with M10 levelling bolts. Raceway :-The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway (below or above TT), are hook on type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with CRCA snap cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes. Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm. Legs : Vibrant plus straight legs, Table tops are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Sealed edge in table top. PVC edge banding are imported from Rehau or Dolken of Germany.
Providing and fixing 1200W X 900D X 740H WITH PRELAM TOP 25mm WITH PRELAM GABLE END, 2DRW + 1 FILE PEDESTAL main table of size 1200 X 900 X 740mm completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding with enhanced scratch resistance supported on 25mm thk. Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer. The Pedestal Unit of Dimensions 400W x 470D x 675mm H is made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are of prelam particle board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers.
Admin (Cashier) Table Providing & Fixing main table of size 1200x600x750mm completely made up of BWR Ply with approved laminate shade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding. Gable ends and 18mm thk Modesty panels. Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer. The Pedestal Unit of Dimensions 400W x 450D x 710mm H is made of 17mm thick BWR Ply with as per approved lamiante shade . All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 2 file drawer. The sides of Inside drawer box are with Meta Box . The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings etc. complete and approved by Architect / Clients.
Glass Partition : Providing and fixing in position Full height 12 mm thick toughened glass partition using approved make customised toughned glass, glass partition fix upto ceiling by19 mm thick BWR 303 ply boxing to hold glass at top in aluminium glazing profile & Aluminum in glazing profile bottom side of approved make as per Architect/Client's instruction and as per detail drawing. Fixed panels of 12mm thick customized clear toughened glass, edge polished fixing with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber for aluminum sections / filling transparent neutral cure glazed & metal silicon sealant of approved make on the periphery of the glass & wood/Ply etc Each glass panel secured to the 19 mm thick BWR 303 ply box at top and C -Channel at floor.Item includes all necessary fitting / fixing etc. complete as per drawing, approval and instructions of the Architect / Client. sample mock shall be approved from Architect / Client.
Staff Area Internal Partition : Laminate finished ( Both side) partition (solid) : Providing & fixing 12mm thick Commercial BWR 303 grade plywood fixed on frame work on both side finished with 1mm thick laminate. The frame work shall be made from square hollow aluminium section of approved make conforming to IS specification of size 38 x 38 x 1.6 mm vertically and horizontally. The framework shall be fixed as per drawing vertically @ 600 mm c/c & horizontally 1200 mm c/c and first horizontal member shall be fixed at ground level/ floor. In partion frame work (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/ Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered with approved make plywood ,adhesive ,tape, headless nails etc ,finished with 1mm thick laminate in pattern as shown in the drawing having 10 mm groove at skirting level with laminate finished skirting . Rate shall be inclusive of grooves etc complete as per drawing or as directed by EIC/ Architect. Measurements for partition work to be recorded upto finished false ceiling level only irrespective of aluminium frame work, which shall be provided from gr. level to RCC slab / beams soffit level. Plywood board both side will fixed up to RCC slab and all junction will fill with approved sealant complete. Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the openings/cut-outs additional Aluminium support for fixing of patch fittings for doors, making grooves, sections, in filled with termite treated wooden members wherever required or as per drawing /instruction of EIC. and no extra payment shall be considered for additional sections provided. All curved surfaces, recesses, waffles shall be part of the partition including openable shutter / door wherever required area and finished with the same material. Rate shall be inclusive of all item, which are part of partition. Sample mock shall be approved from Architect/Client.
Providing and fixing Discussion Table- 2100 X 1100 X 750h (8 Seater) Table Top 25mm Thick BWR Ply With Approved Laminate Shade With 2mm Thick Pvc Edge Banding. Table Comes Pre-Fitted With Flip Top Box For Providing Power-Data-Voice Switches On A Modular Switch Plate. Access Flap Consist Of Aluminium Extruded Top Cover. Standard Nominal Size 450 Mm (8 Module + Quadra Plate-For Data). Understructure Is Made Of BWR Ply with approved shade With 2mm Thick Pvc Edge Banding. Gable Ends Are In 25mm Thick And Modesty Panels Are In 17mm Thick BWR Ply Panels. The Table Comes In Packed In A Flat Condition And Easy To Assembly Modules And Hardware Which Gets Quickly Installed In The Final Customer Destination.
Providing and fixing Principal's Table-Main Table-2400L X 900D X 740H, Side Storage 1200Lx450DX750Ht , Back Storage- 2400 x 450x 750H / 1950H, 3Drawer pedestal 400W x 470D x 545H The table top is Post-laminated for better abrasion and scratch resistance. The Table top is made of BWR plwood with 1mm top laminate and 1mm bottom laminate. The overall thickness of the Table top from visible side is 36 mm. All exposed edges have 2mm PVC edge banding. It has a dual tone colour with the base colour being White and the top colour to be Walnut Bronze/ Acacia Exodus / Black Cherry. The modesty is Post-laminated for better abrasion and scratch resistance. The Modesty is made of 17mm BWR Plywood with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour. The understructure is 200mm wide on both sides. It is made up of BWR Plywood and is white in colour. All exposed edges have 2mm PVC edge banding. The understructure has the capability of carrying wires within it. The main table has an access flap arrangement for easy access of switches and sockets for connecting the gadgets. The access flap cover is made of Aluminum extrusion and powder coated upto 50-60 microns. The back storage The storage caracass is made of 17mm thick BWR Ply of black colour. The shutters and storage top are Post-laminated for better abrasion and scratch resistance. The storage top is made of 17 mm BWR Ply with 1mm top laminate and 1mm bottom laminate. The shutters are made of 17mm BWR Ply with 1mm top laminate and 1mm bottom laminate. The storage back is made of 9mm thick BWR Ply. The shutter and storage top colour is matching to the main table. The storage is completely handle less and is openable from the top. Al hinges are from Hettich. One number EBCO premium lock has been considered for the storage. All exposed edges have 2mm PVC edge banding. The storage skirting is of 75mm high, etc. complete as per drawings and designing and approval of Architects/ Clients.
Providing and fixing TV Unit TV Unit ( Laminate finish): Providing, making and fixing storage units in position as per reference drawings. Storage made from IS 303 BWR 17 mm thick , finish with 1.0mm thick approved colour laminates and outer laminate as per approved make and shade. Solid Shutter: shall be made from 17 mmm thick BWR 303 Ply Wood with both side laminate finish with approved locking arrangement system. Shelf: as instruction & making and fixing shelf from 17 mm thk IS 303 BWR ply finish with both side approved laminate.. providing lighting arrangement cutout and fixing as per detail drawing. providing required nos of drawers with necessary hardware of approved make work complete including all type of hardware, fittings , fixtures , as per approved mockup sample by Architect.
PROVIDING & FIXING PANEL BASED VIBRANT PLUS (LINEAR) 1500 Teacher Table-X-DESK @ 1200LX600DX750HT, (WITH PEDESTAL). 1200MM (60MM THK.) Cubicles:- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 40 mm for higher wire carrying capacity. Tiles made of 09 mm thick BWR Ply finished with laminate & the verticals are made of Aluminium Extrusions of 1.5mm thick Frame Horizontals are made of 1.5 mm thick Aluminium Extrusion All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color. All the frames are fitted with M10 levelling bolts. Raceway :-The raceways are made out of 1.5 mm Aluminium & powder coated. The electrical raceway (below or above TT), are fixed type which will be mounted on the verticals made of 9 mm thick ply fninished with laminate. The skirting/data raceway is hollow and will be mounted on the raceway channels. Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with Aluminium cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 8mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Bottom Row of BWR Ply Tile: 9mm Thick BWR ply with lamiante finish . Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 8mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 9mm. Table Top- 25mm thk Table top made of BWP Ply with laminate as per appoved shade and edges cover with PVC edge banding. Gable End - Table top will be supported on 17 mm thick BWR Ply finished with 1mm laminate on both side. Sealed edge in table top. PVC edge banding are imported from Rehau or Dolken of Germany etc. complete as per drawings and designing and approval of Architects/ Clients.
Providing & fixing Teacher Table @ 1800LX750DX740HT, + BWR PLY MODESTY TABLE TOP :- The Table Top is made of 25mm thick BWR PLY as per approved shade , The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 750mm. Gable End - 17 mm thick BWR ply with 1 mm laminate finish. all edges to be covered with 2 mm thick PVC edgeband. etc. complete.
TABLE 900 X 600 X 740 (with 400mm height screen) WITH PRELAM TOP & ERW MS UNDERSTRUCTURE (50X50), WITHOUT ACCESS FLAP TABLE TOP :- The Table Top is made of 25mm thick thick BWR PLY as per approved shade . The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. Legs:- The legs are 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. Tie Member :- The tie member should be 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. None of the welding joints should be visible from outside. MAST :- The vertical and horizontal of the mast to made up of 1.6 mm thick CRCA bent into the C shape channel. The mast size to be considered as 500 x 105mm for sharing back to back cluster. For non sharing cluster the Mast size is 230 x 105mm. The mast cover is 0.7mm thick galvanized iron sheet. The inner brackets are 3 mm thick CRCA. LEG SHOE/LEVELLERS :- The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levelers on the legs by eliminating any welding process. The levelers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. BEAM :- The beam is 1.2mm thick CRCA bent in the form of C channels with 3mm thick CRCA brackets. The bottom cover is made of 0.7 mm thick GI sheet. All welding is from inside eliminating manual finishing. The beam acts as a main spine, stiffeners and also cable carrying raceway thus eliminating use of extra material. The size of the beam is 100mm height and depth of 445mm for sharing. In case of non sharing the size is 100mm height and 190mm depth etc. Completed as per detail drawing , designing and approved by Engineer-in-charge, architect / clinet.
Proviidng & Fixing Issuing Counters-3000L x 750 x 750/1050ht, , Back storage 4800Lx450DX750ht , 1D 1F Pedestal, BWR PLY Modesty TABLE TOP :- The Table Top is made of 25mm thick BWR Ply with approved laminate shade with PVC edge banding.. The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 750mm. 25mm Gable ends and 17mm thk Modesty BWR Ply panels. exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. The Pedestal Unit of Dimensions 400W x 450D x 710mmH is made of 17mm thick BWR ply with asp er approved lamiante shade .. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 2 box drawer and 1 file drawer. The sides of Inside drawer box are with Meta Box . The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. The pedestal is fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 3 drawers etc. complete as per drawings and designing and approval of Architects/ Clients.
Providing & Fixing Librarian's Table Unit-- Main Table 1950LX900DX750Ht Side storage- 900LX450DX750ht ,Back Storage-2400LX450DX750ht +BWR PLY 1D+1F PEDESTAL @400 X 450 X 710 Table Top: - The table top is Post-laminated for better abrasion and scratch resistance. The Table top is made of BWR PLY with 1mm top laminate and 1mm bottom laminate. The complete Table top is 36mm thick. All exposed edges have 2mm PVC edge banding. The colours available are Walnut Bronze/ Acacia Exodus / Black Cherry. Modesty panel: - The modesty is Post-laminated for better abrasion and scratch resistance. The Modesty is made of 17mm BWR PLY with 1mm top laminate and 1mm bottom laminate. All exposed edges have 2mm PVC edge banding. The colour of the modesty is matching to the table top colour. Understructure :- The understructure is 200mm wide on one side is 25mm. It is made up of BWR PLY and is black in colour. The understructure has wire management properties and can carry concealed wires within it. All exposed edges have 2mm PVC edge banding. Wire Management :- The understructure has the capability of carrying wires within it. The main table has an access flap arrangement for easy access of switches and sockets for connecting the gadgets. The access flap cover is made of Aluminum extrusion and powder coated upto 50-60 microns. The back storage The storage caracass is made of 18mm thick Ply of black colour. The shutters and storage top are Post-laminated for better abrasion and scratch resistance. The storage top is made of 36mm Ply with 1mm top laminate and 1mm bottom laminate. The shutters are made of 18mm Ply with 1mm top laminate and 1mm bottom laminate. The storage back is made of 9mm thick Ply. The shutter and storage top colour is matching to the main table. The storage is completely handle less and is openable from the top. Al hinges are from Hettich. One number EBCO premium lock has been considered for the storage. All exposed edges have 2mm PVC edge banding. The storage skirting is of 75mm high, the storage area height is 455mm high and the display area is 175mm high etc. complete as per drawings and designing and approval of Architects/ Clients.
Providing & Fixing Guest Table- 2100 X900 X 740H Table Top 25mm Thick BWR Ply With Approved LAminate Shade With 2mm Thick Pvc Edge Banding. Table Comes Pre-Fitted With Flip Top Box For Providing Power-Data-Voice Switches On A Modular Switch Plate. Access Flap Consist Of Aluminium Extruded Top Cover With Textured Powder Coating Finish In Silver Color As A Standard To Match Any Décor. Standard Nominal Size 450 Mm (8 Module + Quadra Plate-For Data). Understructure Is Made Of BWR ply with approved shade With 2mm Thick Pvc Edge Banding. Gable Ends Are In 25mm Thick And Modesty Panels Are In 17mm ThickBWR Ply panels. The Table Comes In Packed In A Flat Condition And Easy To Assembly Modules And Hardware Which Gets Quickly Installed In The Final Customer Destination etc. complete and approved by Architects.
PROVIDING & FIXING PANEL BASED VIBRANT PLUS (LINEAR) 900 x 600D x 740H, PANEL HT. 1200MM (60MM THK.) Frames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 40 mm for higher wire carrying capacity. Tiles made of 09 mm thick BWR Ply finished with laminate & the verticals are made of Aluminium Extrusions of 1.5mm thick Frame Horizontals are made of 1.5 mm thick Aluminium Extrusion All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color. All the frames are fitted with M10 levelling bolts. Raceway :-The raceways are made out of 1.5 mm Aluminium & powder coated. The electrical raceway (below or above TT), are fixed type which will be mounted on the verticals made of 9 mm thick ply fninished with laminate. The skirting/data raceway is hollow and will be mounted on the raceway channels. Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with Aluminium cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 8mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Bottom Row of BWR Ply Tile: 9mm Thick BWR ply with lamiante finish . . finishes. Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 8mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 9mm. Table Top- 25mm thk Table top made of BWP Ply with laminate as per appoved shade and edges cover with PVC edge banding. Gable End - Table top will be supported on 17 mm thick BWR Ply finished with 1mm laminate on both side. Sealed edge in table top. PVC edge banding are imported from Rehau or Dolken of Germany etc. complete as per drawings and designing and approval of Architects/ Clients.
Provoding & Fixing Xerox Table Office table-X-DESK @ 1800LX750DX740HT, Side storage - 1200LX450DX750ht (WITHOUT PEDESTAL), SQUEEZEE + PLY MODESTY TABLE TOP :- The Table Top is made of 25mm thick PLY as per approved shade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding. Gable ends and 18mm thk Modesty panels. Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer. The Pedestal Unit of Dimensions 400W x 450D x 710mmH is made of 17mm thick BWR Ply with as per approved lamiante shade .. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 2 file drawer. The sides of Inside drawer box are with Meta Box . The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings etc. complete as per drawings and designing and approval of Architects/ Clients.
PROVIDING & FIXING Table @ 1950LX900DX740HT W/O ACCESS FLAP TABLE TOP :- The Table Top is made of 25mm thick BWR ply as per approved shade. The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 750mm. Legs:- The legs are 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. LEG SHOE/LEVELLERS :- The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levelers on the legs by eliminating any welding process. The levelers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. Tie Member :- The tie member should be 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. None of the welding joints should be visible from outside etc. complete as per approved shop drawings and designing and approval of Architects/ Clients etc. complete as per drawings and designing and approval of Architects/ Clients.
Providing & fixing open storage for students Size 1200X900X400MM,Non toxic modular storage in 25 mmm thick pre laminated MDF board with edge Banding tape etc. Completed as per detail drawing , designing and approved by Architect .
Platform : Providing and fixing MS structure of 38mmx38mmx3mm Square tube of grid 600x1200 c/c in fabrication including with 2 coat of oil paint and fixing BWR 303 Plywood structure of 19mm at top and , 12mm in vertical with the help of self tapping screw vertical portion is finished in 1mm thick laminate at all perifery and at top 6mm thick wooden flooring shall be fix as specified by architect as per detail drawing & designe etc. complete.All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer
Providing & fixing of Executive Conference Table-U Shape Conf Table (26 Pax ) @ 8100lx3300dx750ht Table Tops – In Standard Modules, Made Of 36mm Thick BWR ply with 1 mm thick laminate finish and all edges to be coverd with 2 mm thick PVC edgeband. Understructure – Legs Made Of 25mm Thick Post Formed Panels Interconnected With 17mm ThickBWR Ply Modesty Panels, With Height Adjustable Levelers To Take Care Of Uneven Floors. Wire Management – Concealed Wire Management To Take Care Of Basic Wiring Requirements Both Horizontally & Vertically. For Closed Configurations, Liftable Top Cover, Is Provided To Access The Horizontal Wire Carrier. For Open Configurations, Wire Channel Is Mounted On The Inner Side Of Modesty Panel For Horizontal Wire Carrying. Vertical Wire Management Is Through Flexible Vertical Wire Manager. Standard Table Top Height – 750mm. Designed For Flexibility Through Modular Construction, Post Formed Legs For Safe Use, Provision For Easy Wire Management, Upgradeable / Reconfigurable For Future Needs etc complete as per drawings.
Counter : Providing & fixing Counter Top is Granite 17 mm with BWR Plywood structure of 17mm, 12mm & 6mm thicknesses as indicated. Finishing on both side with specified laminates. Drawers to contain side mounting & Telescopic channels of approved make. Shutters (17mmm BWR 303 Ply Wood) to contain sliding fittings of approved make. PVC Edge band / laminate of matching colour. 12mm Soft board to be provided with specified fabric wrapped all around. Teak Wood to be used for Lipping & Meranti Wood for Partition. Please refer to drawing for other details and specifications.
Providing & Fixing @ 1800LX1100DX740HT W/O ACCESS FLAP TABLE TOP :- The Table Top is made of 25mm thickBWR PLY as per approved shade . The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 740mm. Legs:- The legs are 50 x 50mm thick Square pipe made of 1.6mm thick CRCA pipe duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. LEG SHOE/LEVELLERS :- The leg shoe is made up of 100% recyclable nylon 6. The shoe helps in mounting of levelers on the legs by eliminating any welding process. The levelers are made of Nylon 6 with M8 bolts insert moulded to take care of any floor undulation. Tie Member :- The tie member should be 80 x 40mm pipe structure made of 1.6mm thick CRCA duly powder coated. The powder coating thickness considered is 50 to 60 microns DFT. Structure to fully welded with all arc welding from inside eliminating manual finishing. None of the welding joints should be visible from outside etc. complete and approved by Architect / Clients.
Providing & Fixing Computer Table-PANEL BASED VIBRANT PLUS (LINEAR) 1200 x 600D x 740H, PANEL HT. 1200MM (60MM THK.) Frames :- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 50mm for higher wire carrying capacity. Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick Frame Horizontals are made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims All the frames are fastened together by means of M6 NUTS & BOLTS . All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color. All the frames are fitted with M10 levelling bolts. Raceway :-The raceways are made out of 0.8mm thick CRCA & powder coated. The electrical raceway (below or above TT), are hook on type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with CRCA snap cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 4mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Bottom Row of Laminate Tile: 9mm Thick ply with lamiante finish .Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 5mm. Legs : MS Powdercoated 50X50Leg 25mm thk Table top made of BWP Ply with laminate as per appoved shade and edges cover with PVC edge banding..Specially designed powder coated M.S. brackets fixed to the partition frame support the tabletops. Sealed edge in table top. PVC edge banding are imported from Rehau or Dolken of Germany etc. complete as per detailed Drawings and approved by Architects/ Clients.
Shoe Rack-Shoe Rack Size 5120(L)x450(D) x 1200 (H):-Supplying and installing in position storage cabinet of approved make, colour and size 5120mm (L) X450mm(W) X1200mm(HT) made up from 19mm thick exterior grade pre laminated BWR 303 Ply Wood, with back and sides finished with the same colour laminates. Four numbers of shelf of depth 450mm of 19mm thick prelaminated BWR 303 Ply Wood inside the storage to be provided. All the exposed edges are to be with 2mm PVC edge banding and sealed edges are with 0.8mm thick PVC edge banding and with equal size shutters fixed with s.s. brush finish brass hinges & s.s handles304 grade premium lock to be provided and four shelf in centre fixed on shelf button. Both made up of 19 mm thick prelam BWR 303 Ply Wood with 2 mm thick PVC edge banding on exposed sides & sealed edges in 0.8mm thick PVC edge banding.. All material shall be of approved make. All works should becomplete and all finishes approved by the architect.
LABORATORY BENCH CONSITS OF SIZE 2400LX1200WX900H Storage Cabinets of 6001S1S - 4 nos, Supply and Installation of Laboratory Workbenches/Storage units including granite worktops and other supporting structures/hardware’s based on the specified Make List. includes delivery to ABC, unloading the consignment and transporting it from the place of storage to the installation site. Supply & Installation of all utility service outlets and accessory fittings, electrical receptacles, plumbing and electrical switches & fittings identified on drawings as mounted on the laboratory furniture. Supply & Installation of all laboratory sinks, bottle traps, drain troughs etc. including service structures where specified and setting in place reagent shelves of the type shown in the drawings & removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the laboratory furniture and accessories and leaving the premises broom clean and orderly. ali Furniture shall meet the performance requirements and should follow SEFA 8 guidelines. a. Floor Based Cabinet with Metal Skirting • Welded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. • It should be relocated anywhere easily as it is an independent unit. • Cabinet should of square non-sharp edge construction. • Doors should be assembled with SS-304 hinge assembly. • Removable back panel should be provided to easily access the service lines running behind the cabinet benches. • Intermediate horizontal channels should be provided between door and drawer. • Toe-space of 90mm X 90mm is provided at front-bottom side of cabinet. • Levelers are provided for easy leveling of welded cabinet. • Shelf should be eight-bend panel with 20mm height. • Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. • Steel door and drawer front should be of double wall construction with sound dampenening material filled inside. • Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction • Dimensions: W=300/450/580/600/750/900 mm, D = 530mm, H = 875/725 mm • Configurations: 1 Shutter + 1 Drawer/4 Drawers/Leg Spaces/1 Shutter/2 Shutters/3 Drawers/2 Shutters + 1 Drawer/Sink Unit + 2 Shutters • MOC: MSCRCA: IS – 513 (1994) {quote for set of 4}
• Thickness: o LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk. o Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthk • Finish: Powder coating pure epoxy, thickness 40-50 microns • Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm • Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit) • Hinge: SS Hinge Screw: SS 304 Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch. WORKTOP a. GRANITE • It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides • The backing material used for granite should be a neoprene mat of 6 mm thickness. SINK (PP SINK) • It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents • PP Bottle-traps should be offered with PP Sinks • Standard bowl size (L x W x D) should be 500 x 400 x 300 mm • 1-way/2-way/3-way Faucet should be provided (Make: Broen/Watersaver). PEGBOARD (MOC: SS) • These should be Single faced high grade stainless steel pegboard having a tray hole for water drainage and detachable pegs. • The essence should be made up of I mm thick stainless steel (SS 304) whereas the pegs should be made up of polypropylene and will be adjustable with a minimum 10mm distance between each peg
ELECTRICAL TRUNKING • Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. • The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. • The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. • It should have a high temperature withstanding capacity with excellent electrical insulation properties. • The rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating. SWITCHES AND SOCKETS • These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface. • They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. • Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. • Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings
Providing & fixing Cubicles:- Partition thickness is 60mm for stability and with the inside gap between two tile is approximately 40 mm for higher wire carrying capacity. Tiles made of 09 mm thick BWR Ply finished with laminate & the verticals are made of Aluminium Extrusions of 1.5mm thick Frame Horizontals are made of 1.5 mm thick Aluminium Extrusion All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color. All the frames are fitted with M10 levelling bolts. Raceway :-The raceways are made out of 1.5 mm Aluminium & powder coated. The electrical raceway (below or above TT), are fixed type which will be mounted on the verticals made of 9 mm thick ply fninished with laminate. The skirting/data raceway is hollow and will be mounted on the raceway channels. Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with Aluminium cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 8mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Bottom Row of BWR Ply Tile: 9mm Thick BWR ply with lamiante finish . . finishes. Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 8mm MDF with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back. Total thickness is 9mm. etc. complete and approved by Architect / Clients.
Drawing Table Providing & fixing Table Top is made of 25mm thick BWR PLY as per approved shade . The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be as per detailed Drawings. Gable End - 17 mm thick BWR ply with 1 mm thick lamiante finish. All edges to be covered with 2 mm thick PVC edgeband.
Providing & Fixing X Desk 1800L x 750 x 740, side table 1350 x 450, Back storage 1200Lx2100ht- 2 nos , 1D 1F Pedestal, PLY Modesty TABLE TOP :- The Table Top is made of 25mm thick BWR PLY as per approved shade . The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 750mm. Gable End - 17 mm thick BWR ply with 1 mm thick lamiante finish. All edges to be covered with 2 mm thick PVC edgeband. Mobile Pedestal - 17 mm thick BWR ply with 1 mm thick lamiante finish. All edges to be covered with 2 mm thick PVC edgeband etc. complete as per drawings & designe and
Providing & Fixing Teacher Table @ 1800LX750DX750HT, (WITH PEDESTAL), SQUEEZEE + METAL MODESTY TABLE TOP :- The Table Top is made of 25mm thick BWR PLY as per approved shade . The exposed edges of the table top are sealed with 2mm PVC edge banding. The height of the table top from the ground should be 750mm. Gable End - 17 mm thick BWR ply with 1 mm thick laminate finish. All edges to be covered with 2 mm thick PVC edge band. Mobile Pedestal - 17 mm thick BWR ply with 1 mm thick laminate finish. All edges to be covered with 2 mm thick PVC edge band etc. complete as per drawings, design and approved by Architects / Clients.
Providing & Fixing Office Table-2000X 750 X 750 with side storage 900lX450DX750ht TABLE TOP :- The Table Top is made of 25mm thick PLY as per approved shade with PVC edge banding. Top are with 25mm thk boards with 2mm PVC edge banding. Gable ends and 18mm thk Modesty panels. Exposed edges are in 2mm thk PVC edge banding & sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables shall be made by customer as the tables do not come with switch mounting facility. Wire routing / wire management groumets shall be provided on main or side table as specified by customer. The Pedestal Unit of Dimensions 400W x 450D x 710mmH is made of 17mm thick BWR Ply with as per approved lamiante shade .. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 2 file drawer. The sides of Inside drawer box are with Meta Box . The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.PVC recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings.
Signage Board: Providing , Supplying and fixing signage board of 3mm Acrylic sheet with UV printing letter including all lift , lead , Scafollding , fixtures & fastening etc. complete as per approved shop Drawings.and sample approved by Architect / Clients.
CIVIL WORK
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means
Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m). By Mechanical Means
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m).
Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.
Filling in plinth and floors with contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.
Providing preconstructional antitermite treatment as per I.S.6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper.
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate
Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing exposed wire cut brick masonry with / I.S. type bricks in12mm grove in cement mortar 1:3 , in 110mm thick wall including striking joints, racking out joints and watering,scaffolding etc. complete.(SIZE .230x110mmx75mm)
Providing and laying brick , cladding tiles having size 230 X75 X15mm confirming to corresponding I.S. for cladding in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including 12 mm grove including striking of joints, racking out joints, scafolding , cleaning & curing etc. complete .
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete.
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
Providing and applying Texture plaster with finishing with Purlina/ Rustic texture material (with texture material of Asian/ Renava/ Nitco/ Temtex or equivalant company make) in 3 to 4 milimeter thickness on previously finished plastered surface including plaster Groove 6mm thick or Tape Grooves 35 to 45 mm thickness or as required in all postion including preparing the surface scaffolding etc. complete. (Excluding texture Paint and Texture Paint Finishing) (Prior permission of S.E. is required before inclusion of this item in the estimate)
Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to oncrete or brick surfaces, in all position including scaffolding and curing etc. complete.
Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.
Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.
Providing and applying plastic emulsion paint of approved quality, colour and shade to old/new surface in two coats including scaffolding, prepare the surface. (excluding primer coat ) etc. complete.
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
Provide and fixing on site door frame in 18mm and 12 mm thick waterproof plywood and 1.5 mm thick laminate top on all sides, approved colour, make, brand, as per detailed design and drawings etc. complete.
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.
Providing and fixing on site door shutter in 32 mm thick waterproof flush door of approved quality and make , 1.5 mm thick laminate of approved colour and make on both side including teakwood leaping, stainless steel fitting fixtures as per detailed design and drawing complete.
Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete.
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.
Providing and fixing Mild steel grill work for windows, ventilators etc. 20 kg./sq.m. as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete.
Providing and fixing 900 mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5 mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and fixing in position polycarbonate sheet roof as per detail design and drawing with minimum thickness of sheet as 10mm of Lexan or any other approved make including making the joints waterproof with all labour and material and accessories to complete the work.
Grabbars-Providing S S grab bars set for accessible toilets comprising of 4 nos.Grab bars as specified below.(1nos.wing grab bar+1nos.L shaped grab bar+2 nos.straight grab bars=1 typical set) 27 a)Swing grab bar (1NOS) Providing a S.S.304 S WING HANDICAP GRAB BAR-700mm and of DIA:32MM and thickness 1.5mm of the roved brand and make.27b) L Shaped grab bar (1NOS) Providing S.S.304 L SHAPED DISABLED GRAB BAR of IZE-600MM(H)X600MM(D) and 32MM DIA.and thickness mm of the approved brand and make.27c)Straight grab bar (2NOS)Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. Spec. No.: As directed by Engineer Incharge
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.
Providing and fixing C.P.Hand Wash hooker jaquar make continental etc. complete.
Providing and fixing C.P.Toilet paper holder jaquar make continental etc. complete.
ROAD WORK
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.
Supplying hard murum/ kankar at the quarry site, including conveying and stacking complete.
Spreading hard murum for side width etc. complete.
Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
Construction of dry lean cement concrete Subbase over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer in charge ,compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.
Providing and laying in situ cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement ) with Natural sand etc. complete
Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant
Multisport Ground
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means
Supplying hard murum / kankar at the road site,including conveying and stacking complete.
Spreading hard murum / soft murrum / gravel or kankar for side width complete.
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc.complete.
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC,carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
Wet Mix Macadam-Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver
Primecoat-Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means
Providing and applying tack coat on the prepared surface heating by flames in Boiler and spraying bitumen withs prayer on Granular surface treated with primer @ 2.75 kg/10sqm (VG-30 bulk bitumen rates are considered to arrive at rates)
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen bolleron B.T. surface 2.5kg/10sqm.(VG-30bulk bitumen rates are considered to arrive at rates)
DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading1 , premixed with bituminous binder of specified grade of Bitumen @4.50 percent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness. USING Batch mix type hot mix plant with SCADA, Sensor Paver,Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)
BITUMINOUS CONCRETE:-Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 percent by weight of total mix and filler, transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50mm compacted thickness with specified grade of Bitumen, Excluding prime / tack coat. For Bitumen of specified grade--USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dustfiller. (VG-30 bulk bitumen rates are considered to arrive at rates)
Prefab Drain for Football Cricket and Track
Supply of Prefab Polymer Concrete ACO Drain V 100 Multiline Channels as per EN 1433 having following properties a) Compressive strength -96 N/mm2 b) Flexural strength -27N/mm2 c) Water absorption - 0.07% d) Manning's roughness- 0.011. The Channels must be 'V'-profile in shape with integrated edge protection made up of Galvanised Steel .......... with boltless drainlock®grating with anti-shunt 4 no. provision per length. The Channels must also be pre-sloped 1:200 or same invert / variable depth with 500 or 1000 mm length and with tongue and groove joints for interlocking, integrated lip labyrinth sealing for liquid-tight connection to ground line with needed accessories like end cap, end cap with outlet etc. Channels to have anchoring features on the outside wall to ensure mechanical bond to the surrounding bedding material and pavement surface.The Channel gratings ACO Composite Polyproplene Silvergrey Colour Boltless Gratings Class EN 1433 (W)123MM x (L)500MM With Inlets Opening Measurement 8MM and Intake Areas 284 ( cm2/m) with Total Weight Gratings 0.8 Kgs Weight confirming to EN 1433. The Channels will have the nominal width of 100 mm and invert depth varying between 150-250 mm as per design & ACO Sport Clamping Stone for shock pads This clamping Stone stomne with a claw Fastener can be used as a brim for shock pads & a clamping rail made of alumium for artificial truf .Length 1000 mm Width 50 mm Height 180 mm Weight 12,20 kg channels and joint in a period of 30 min ± 30 sec. 5. Gratings: for D 400 - F 900-depth of insertion should have at least 50 mm and does not apply if the grates are secured by locking arrangement, sufficient mass per unit area and specific design. 6. The Grate slot openings for A and B load class shall comply as following: for 8 to 18 mm slot - no length Limitation and more than 18 to 25 slot opening the length should be ≤ 170 mm. 7. The thickness of trafficked edge and contact surface protection for C load class - 2 and 1 mm and for D load class- 4 and 2 mm. 8. The gratings shall be secured within channel body either by a). locking arrangement b). sufficient mass per unit area OR c). specif design feature .
Supply and Installtion Field turf FT HD2: 50mm FIFA approved, UV resistant polyethylene, Slit Film, fibrillated filament turf with permeable backing for higher drainage, complete with Installation, stitching, Silica Sand & SBR Infill, brushing & line marking, 15mm Shock pad etc complete.
Athletic Track- Supply and Installation of Synthetic Athletic Track, Sandwich system, Cast In Situ, minimum 13.5 mm thickness, Terracotta Color as per approved drawings etc. complete.
Cricket Practice Pitch cage - THREE BAY SIZE 3.66M WIDE x 25 Mtr X 3 BAy • 42 mm diameter x 3mm galvanised steel uprights and toprods • 3.66m long toprods complete with 11 net hanging hooks • 450mm deep steel sockets fitted with stabilising base plates • A heavy duty tube clamp is supplied with each upright. • Garware HDPE net 2.5 mm thick
Providing and Movable Football Goal Post with Net size as per FIFA Speciifcation
providing movable Hockey goal post AS PER norms.
Chain Link Fencing - Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50x50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450x450x670mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25x25x5mm size and vertical M.S. flat 35x5mm and 25x5mm horizontal including cross support of 40x40x6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450x450x670mm including 3 coats of oil painting etc. complete. SSR P. No.285, Item No. 46.39
Prefab DRAIN FOR VOLLEYBALL/TENNIS - Supply of Prefab Polymer Concrete Drain Multiline Channels as per EN 1433 having following properties a) Compressive strength -96 N/mm2 b) Flexural strength -27N/mm2 c) Water absorption - 0.07% d) Manning's roughness- 0.011. The Channels must be 'V'-profile in shape with integrated edge protection made up of Galvanised Steel .......... with boltless drainlock®grating with anti-shunt 4 no. provision per length. The Channels must also be pre-sloped 1:200 or same invert / variable depth with 500 or 1000 mm length and with tongue and groove joints for interlocking, integrated lip labyrinth sealing for liquid-tight connection to ground line with needed accessories like end cap, end cap with outlet etc. Channels to have anchoring features on the outside wall to ensure mechanical bond to the surrounding bedding material and pavement surface.The Channel gratings ACO Composite Polyproplene Silvergrey Colour Boltless Gratings Class EN 1433 (W)123MM x (L)500MM With Inlets Opening Measurement 8MM and Intake Areas 284 ( cm2/m) with Total Weight Gratings 0.8 Kgs Weight confirming to EN 1433. The Channels will have the nominal width of 100 mm and invert depth varying between 150-250 mm as per design.The polymer concrete channel will have flow of 14.2 Lit/sec.Requisites of EN 1433: 1. Material and Strength: Channels material should have UV-resistance, abrasion and Fatigue resistance. The Compressive & Bending strength at 7days shall confirm to these values - ≥ 90 N/mm2 and ≥ 22 N/mm2 . 2. Dimemsion Tolerance of Channels : Length shall have ± 2 mm, Width ± 2 mm, Depth ± 3mm. If depth is less than 200 mm then± 2mm. 3. Gradient: Where gradient is required - shall not be less than 0.5.%. The step fall should not be greater than 6 mm and at least the height should be equal to width. The nominal size of discharge outlet of channel shall not less than DN 100 . 4: Water tightness: Sealing of the Joints to be done in accordance with manufacturer recommendations and no leakage shall appear from the body of the channels and joint in a period of 30 min ± 30 sec. 5. Gratings: for D 400 - F 900-depth of insertion should have at least 50 mm and does not apply if the grates are secured by locking arrangement, sufficient mass per unit area and specific design. 6. The Grate slot openings for A and B load class shall comply as following: for 8 to 18 mm slot - no length Limitation and more than 18 to 25 slot opening the length should be ≤ 170 mm. 7. The thickness of trafficked edge and contact surface protection for C load class - 2 and 1 mm and for D load class- 4 and 2 mm. 8. The gratings shall be secured within channel body either by a). locking arrangement b). sufficient mass per unit area OR c). specif design feature .
Construction of dry lean cement concrete Subbase over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer in charge ,compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete.
Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter ( excluding reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artifitial Sand etc. complete
Sport Court Power Game for tennis - Supply & Installation of Porplastic – Multi Top PU Synthetic Surface. Total Thickness of PU system 12 MM ((10 MM Prefabricated + 2MM Cast in Situ PU layer complete with line marking)
Supply movable Tennis Post with green / Black powder coated finish Tennis post including counter weight post caps, gear housings, flush mounted ,removable handle, jam-free cable tensioning hardware system & superior hardened gears case and 42' long Tennis Net consist of 3mm High Tensile Braided Twine and black/white PVC Banding 2 1/2" on net Side & Bottom Headline Cable - 6mm PVC Coated Steel Cable. With Loop & Pin Finish etc complete as per the direction of Engineer
Supply and installation of height adjustable MS powder coated 70 mm dia Volleyball post with internal winding and volleyball net including sleeves
Indoor Sport
BADMINTON POST :- Stylish Design, Made from 40X40 mm steel square tube with 60kg. of ballast weight.Roller wheels are provided to facilitate easy transport and storage. This is designed for strength and stability, to support heavy net. with a large base maintain the stability.
Badminton Flooring: Providing & fixing Indoor wood flooring planed on both sides tongued & grooved along with necessary hardware & required hard wood scantling of framework to support, effactive ball response, bounce and vision quality, affordable, maintenance free and long lasting multi-sport flooring,use on EPDM rubber air-crush pads, use of bona,loba and cipy Polyurethane Lacqur polish which is Anti-Skid and DIN approve,internationally approved and technically sound flooring required,safe and injury free playing surface required. etc including cleaning as per Architects detailed drawing & design etc complete.
Table Tennis Flooring: Providing and laying Taraflex Synthetic sports surface with total thickness of 12.5mm thick, combining two layer installation with 5mm Polyoléfine foam and 7.5 mm thick World Badminton Federation approved synthetic floor which consist of 100% pure vinyl wear layer not less than 2 mm thick, protecsol and sanosol treated to reduce Skin burn with double fiber glass grid for sound stability on floor and 5 mm CXPTM HD double density foam backing with D-MAXTM+ ensuring highest possible resistance to indentation, durability and energy return, width of sheet not less than 1.5 M joined with seamless Hot welding. Laid with adhesive as per manufacturer’s instruction over existing leveled surface including 6 game lines marking with following specification. Shock absorption under EN 14808 standard not less than 45% Ball bounce under EN 12235 standards not less than 90% Abrasion resistance as per EN ISO 5470-1 shall be < 350 mg. Friction coefficient as per DIN - 18032 0.4 - 0.6, Impact resistance as per DIN 18032 > 7 N/m., Sound isolation shall be > 23 dB.Minimum manufacturer Warranty not less than 5 year.
Table tennis Table 19 mm thick Table top ITTF approved Make Stag Or Joola
American pool table with standard imported accessories, table made up of seasoned malaysian hardwood and stone used is indian Black stone in 4 piece with 40mm thickness.
SPRING RIDER DUCK-PRODUCT AREA: 2.1’ X 1.1’ SAFE AREA: 4.1’ X 3.1’ - spring assembly is made up of square plates & compression spring. compression spring is made up of 18 dia wire, spring dia is 200 mm and height is 300 mm. stand is made up of 40 nb g.i. pipe isi mark. plate is welded on it to fix plastic duck on it firmly. all welded joints are properly grounded and coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat: done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character –made up of lldpe plastic with rotational moulding process which is non-ageing, non-toxic and have u.v. stabilizers for colour resistance.
SPRING RIDER BIKE, PRODUCT AREA: 3’ X 1.2’,SAFE AREA: 7’ X 3.2’ -spring assembly is made up of square plates & compression spring. compression spring is made up of 18 dia wire, spring dia is 200 mm and height is 300 mm. stand is made up of 40 nb b clas g.i isi mark pipes. plate is welded on it to fix plastic bike on it firmly. all welded joints are properly grounded and coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat: done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. character –is made up of lldpe plastic with rotational moulding process which is non-ageing, non-toxic and have u.v. stabilizers for colour resistance. length of bike is 850 mm long and weight is 7 kgs. it has inbuilt handle and foot rest.
HORSE MGR , PRODUCT AREA: 4.2’ DIAMETER,SAFE PLAY AREA: 8.2 ‘DIAMETER -the platform of this merry go round consists of non-skid type aluminum chequered plate of 14 swg. all welded joints are properly grounded and coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat: done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. the ring on which the chequered plate is based is made out of 25 nb gi pipes. the support below the chequered plate is of 40 x 40 x 5 and 25 x 25 x 5 gi angle. the whole structure is mounted on heavy-duty bearing shaft permanently lubricated with water sealant. the stand of this mgr platform is made out of 80 nb gi pipes. character – plastic horse is made of lldpe plastic which is non-ageing, non-toxic and have u.v. stabilizers for colour resistance with rotational moulding process. it has inbuilt handle covered with nylon handle.
JUNIOR SEE SAW ,PRODUCT AREA: 5.5’ X 1.5’, SAFE AREA: 9.5’ X 5.5’- the lever is made up of 80 nb g.i. pipe b class isi mark. all welded joints are properly grounded and coated with an epoxy sealant for rust resistance. all sharp edges and corners are properly ground before painting. powder coat: done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thicknes. the seat is made up of roto molded lldp plastic which is non-ageing, non-toxic and have u.v. stabilizers for colour resistance. the bearing used is heavy duty pedestal ball bearing.
DISC CHALLENGER, PRODUCT AREA: 6.5’ X 3.2’,SAFE AREA: 12.5’ X 7.2’- disc challanger side frame is made up of 80 nb g.i pipe. all welded joints are properly grounded and coated with an epoxy sealant for rust resistance all sharp edges and corners are properly ground before painting. powder coat: done by first coat of primer –jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness. top pipe is made up of 50 nb g.i pipe. disc is made up of lldpe plastic which is made up of non aeging non toxic and having uv resistant. disc is connected with 20 nb g.i pipe
MULTI FUN PLAY SYSTEMS CONSISTS OF FOLLOWING ITEMS 5' HT FRP SQ. DECK WITH ROTO HOUSE CANOPY 3' HT ADJUCENT SQ. DECK 3' HT FRP SQ. DECK WITHOUT CANOPY 5' HT ROT WAVE SLIDE 5' HT ROCK CLIMBER 3' HT GI LADDER 3' HT ROTO SHRIMP SLIDE BUBBLE PANNEL WINDOW RAILING CROSS N ZERO RAILING SPLIT LEVEL LADDER DOUBLE SLIDE ENTRY SINGLE TODDLER SWING WALKING BARREL HONEY BEE
ACOUSTICAL & STAGE WORK FOR AUDITORIUM BUILDING
Supply & Installation of 12mm thick frameless tempered clear glass Double door :- Size : - 1500mm X 2400mm With door spring and locking arrangements and both way handle and patch fittings. Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it. Properties: 1) Safety (tempered): when broken, it spits into tiny harmless pieces 2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times 3) Outstanding performance in resisting thermal stress and wind-load 4) Tempered glass cannot be cut, drill hole and other further processed.
Supply & Installation of 12mm thick frameless tempered clear glass Single door :- Size :- 1000mm X 2400mm With door spring and locking arrangements and both way handle and patch fittings. Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it. Properties: 1) Safety (tempered): when broken, it spits into tiny harmless pieces 2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times 3) Outstanding performance in resisting thermal stress and wind-load 4) Tempered glass cannot be cut, drill hole and other further processed.
Supply & Installation of Designer Metal Double door covered with Preformed textured RIGID PVC coated GI sheet:- Door Size : 2000mm X 2400mm With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same.
Supply & Installation of Designer Metal Single door covered with Preformed textured RIGID PVC coated GI sheet:- Door Size : 1200mm X 2400mm With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same.
Supply & Installation of Designer Metal Single door covered with Preformed textured RIGID PVC coated GI sheet:- Door Size : 1000mm X 2400mm With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same.
Supply & Installation of Venetian Blinds For Windows Vertical Louvre Fabric Blinds System with extruded aluminium headrail finished in silver anodized. Operation of louvers by cord for traverse and chain for rotation.
Supply & Installation of Acoustic Metal Partition 1) The material of construction shall remain the same as per Acoustic Metal Panelling however in partition the cladding shall be done on either side of the section/grid work. 2) The Metal Partition system shall be RoHS certified (from UL / Intertek) to ensure restriction of hazardous substance so that the final product does not contaminate the environment. Valid RoHS certificate (from UL / Intertek) to be submitted along with the technical Bid. 3) The proposed partition tiles shall be tested and certified as Class A as per ASTM E84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate to be submitted along with the technical bid. 4) Sound transmission class (STC) value of 35 for Wall Panelling & Partition. (According to IS: 9901 (Part III) – 1981, DIN 52210 Part IV- 1984, ISO:140(Part III) -1995, test report from reputed agency to be submitted along with the technical Bid. 5) Safety of user is a high concern area therefore panelling/partition must be seismically tested and qualified for zone 5 vibrations. The test must be carried out by authorized government agency. Certificate to be submitted along with the technical bid. 6) Overall system thickness for partition shall be 70mm to 120mm.
Supply & Installation of Modular Fabric Panelling Fabric Paneling made up of 1150X750mm fitted in auditorium areas as per the acoustical requirement. Fabric Make: Sprint from Camira or Equivalent. The fabric tile shall have modular metal base and must be interchangeable with other perforated PVC metal cladding tiles. The Structure shall remain same as of Acoustic Metal panelling.
Supply & Installation of Acoustic Metal Paneling: 1) Factory made removable type self inter lockable metal panels with front sheet of Preformed Textured Hot dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm & PVC Coating atleast 0.11mm). The back cover of the panel shall be made up of 0.6mm thick CRCA/GI sheet of approved colour. The panelling design shall comprise of specially designed combination of perforated and non-perforated panels through CNC laser Cutting, bending & punching. Panels shall be designed to achieve shape and design as per the design consultant and shall be fixed using CRCA/GI hook fitting on structure. Overall system thickness for panelling shall be 60mm to 90mm and for partition shall be 70mm to 120mm. 2) Tiles Perforation – UL Audit certified design feature on modular wall panelling tile having clean perforations and providing smooth finish on front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. Valid UL audit certificate to be submitted along with the technical bid. 3) Sound transmission class (STC) value of 35 for Wall Panelling & Partition. (According to IS: 9901 (Part III) – 1981, DIN 52210 Part IV- 1984, ISO:140(Part III) -1995, test report from reputed agency to be submitted along with the technical bid. 4) Safety of User is a high concern area therefore panelling must be seismically tested and qualified for zone 5 vibrations. The test must be carried out by authorized government agency. Certificate to be submitted along with the technical Bid. 5) UL Audit Certified design feature of Load bearing capacity of Panelling - Panelling structure shall have load carrying capacity of 300 Kg to hold any display unit on clamp having minimum length of 750mm. Valid UL audit Certificate to be submitted along with the technical Bid. 6) The Metal Panelling system shall be RoHS certified (from UL / Intertek) to ensure restriction of hazardous substance so that the final product does not contaminate the environment. Valid RoHS certificate to be submitted along with the technical Bid. 7) The proposed Metal panelling tiles shall be tested and certified as Class A as per ASTM E84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate to be submitted along with the technical Bid. 8) UL Audit Certified design feature of Modular wall Panelling tile having secure locking arrangement for equidistant mounting. Locking arrangement shall enable easy replacement without using any tool within 20 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. Valid UL audit Certificate to be submitted along with the technical Bid.
Supply & Installation of Designer privacy film for glass Partition/glass Door The film to be installed on clear glass to provide the look of sandblasted glass
Supply & Installation of Under- Deck Insulation : Providing and fixing position Acoustical under- deck insulation of 50mm thick Glass wool of 48kg density, covered by non- woven tissue, supported using chicken mesh, including cost of scaffolding, as per Architectural & Acoustical Design & drawing & Instructions. including all taxes, octroi, transport, Machinery ,other fixtures & fasteners etc. complete.as per details & directed by Engineer -in- charge.
Supply & Installation of Stretch Ceiling: Illuminated with LED luminaires 1) The ceiling shall be supplied with demountable translucent stretch ceiling membrane with harpoon, corners ready to install. It should not get discoloured & sag. All joints shall be provided with appropriate interface trims to be able to demount the ceiling to access the lights. The ceiling must be installed using ceiling aluminium suspension system, complete as per manufacturer’s installation guidelines and as per approved shop drawings in line with the design intent and approval by Architect/Engineer In-charge approval. LED strips shall be installed using custom aluminium extrusions to ensure longevity of the installation. The ceiling shall have following features and properties. 1.1) Simple and maintenance friendly: Installed in a few hours and finished product shall not require any taping, spackling, or painting, and shall be easily cleanable. 1.2) Durable: The systems shall resist shocks and shall not crack with movement or under stretch conditions. 1.3) Safe: The membranes and profiles shall have passed the stringent fire and safety tests. 1.4) There should not be any welding defect on Membranes for years to come on the perimeter edging or in the seams 1.5) The membrane must have been classified as non-toxic upon burning. The Flexible membrane must be ASTM E 84 certified, necessary test report to be submitted along with the technical Bid. 1.6) Green: Membranes must be 100% recyclable.
Supply & Installation of Hanging Acoustic Fabric Baffles 1) The panels shall be made up of acoustic material cover with Acoustic fabric. 2) Baffle shall have dimensions as 120X50mm OR 80X40mm OR as per the site requirement. 3) The open cell shall be created by combination of varying Center to Center distance from 100mm to 2000mm. 4) It shall have acoustic wrapped fabric fully upholstered on all side. The fabric shall be washable and should withstand normal wear and tear. 5) Fabric Make: Sprint from Camira or Equivalent. The fabric tile shall have modular metal base.
Supply & Installation of Perforated Metal Ceiling 1) 80% the overall ceiling area shall be made up of perforated metal panels having below specification. 1.1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprising of perforated and non-perforated metal panels made through CNC laser Cutting, bending & punching. Panel shall be of 0.6mm of approved color. Panels shall be designed to enhance visual feel, with provision for easy installation and maintenance, integrated lighting and scope for integration of building services like HVAC and fire detection/ fighting system. 1.2) As per design panel shall comprise of perforation for making false ceiling acoustically sound with fire rated acoustic fleece 1.3) The Ceiling system must be RoHS certified (from UL/Intertek) to ensure restriction of hazardous substance in any of the materials. Certificate to be submitted along with the technical bid. 1.4) Metal modular false ceiling must have Noise absorption coefficient (NRC) value minimum 0.70 according to IS:8225-1987, ISO: 354-1985 and ASTM 423-90, test report to be submitted along with the technical bid. 1.5) The proposed ceiling tiles should be tested and certified as Class A as per ASTM E84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Certificate to be submitted along with the technical bid. 1.6) Metal Ceiling must have Noise absorption coefficient value. 1.7) Ceiling Plank 1.7.1) Plank shall be made from 0.6mm thick Powder Coated CRCA sheet of approved shade and sizes. 1.7.2) Light fitting can be defined as per the LUX requirement 1.7.3) It shall have Laser cut circular hole for light fixing as per defined lux requirement and approved layout 1.7.4) Non-perforated tile slots to be punched to accommodate AC grills. 2) 20% overall ceiling area shall be made up of fabric ceiling panels as per the acoustical requirement. Fabric Make: Sprint from Camira or Equivalent. The fabric tile shall have modular metal base.
Supply & Installation of Designer Metal False Baffle Ceiling with Integrated Illumination Channel 1) The baffles shall be made of GI/MS sheet or Aluminum. The ceiling baffles planks shall have integrated illumination channel which shall be processed on Machine to have dimensions to suit control room illumination requirement as per architect’s approval. 2) The Finish of the material shall be either Rigid PVC coated GI sheet or powder coated MS sheet or Aluminum. 3) These baffle planks shall have dimensions as per the EIC approval / as per the site conditions. 4) Center to Center distance shall be minimum 150mm. 5) Ceiling system must be RoHS certified from UL/Intertek. Valid Certificate to be submitted along with the technical bid. 6) Finish and component details 6.1) Ceiling Baffle tile: minimum 0.7 mm thick powder coated sheet/Aluminum. 6.2) Carrier made of 0.6mm GI/MS sheet or Aluminum, powder coated to matching baffle color or black as directed by the Customer. Ceiling to have arrangement to fix, hang and lock the baffles of required sizes and at required intervals. The Suitable size punched carrier would be bent channel with holes for suspension and fixing channel. 6.3) The baffles top edge will have a flange of 5mm to fit in the carrier profile. 6.4) Mother C Channel: minimum 0.8mm thick GI/MS sheet or Aluminum with profiles. 6.5) Suspension: The carriers would be placed and suspended by means of a member fixed to the carrier and this member in turn would be suspended by 8mm rod fixed to the slab by means of 8mm diameter dash fastener. 6.6) Top Clamp shall be fastened on threaded rod of minimum 0.8mm thick GI sheet. 6.7) End Cap: minimum 0.7 mm thick GI end cap similar to main ceiling baffle. 6.8) Color: As per approval. 6.9) Entire structure will be in powder coated MS. 6.10) Metal Strip where baffle planks will be hanged should be sleek & sturdy.
Supply & Installation of Grid Type 700mm X 620mm Snap fit Ceiling 1) Factory made acoustic modular metal false ceiling of powder coated panels. Make shall comprising of perforated and non-perforated metal panels (700X620mm) made through CNC laser Cutting, bending & punching. Panel shall be of 0.6mm of approved color. Panels shall be designed to enhance visual feel, with provision for easy installation and maintenance, integrated lighting and scope for integration of building services like HVAC and fire detection/ fighting system 2) As per design panel shall comprise of perforation for making false ceiling acoustically sound with fire rated Acoustic fleece 3) Metal modular false ceiling must have Noise absorption coefficient (NRC) value minimum 0.70 according to IS:8225-1987, ISO: 354-1985 and ASTM 423-90, test report to be submitted along with the technical bid. 4) The Ceiling system must be RoHS certified (from UL/Intertek) to ensure restriction of hazardous substance in any of the materials. Certificate to be submitted along with the technical bid. 5) The proposed ceiling tiles should be tested and certified as Class A as per ASTM E84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Certificate to be submitted along with the technical bid. 6) Metal Ceiling must have Noise absorption coefficient value. 7) Ceiling Plank 7.1) Plank shall be made from 0.6mm thick Powder Coated CRCA sheet of approved shade and sizes. 7.2) Light fitting can be defined as per the LUX requirement 7.3) It shall have Laser cut circular hole for light fixing as per defined lux requirement and approved layout 7.4) Non-perforated tile slots to be punched to accommodate AC grills.
Supply & Installation of M. S. Structure for suspending false ceiling & Catwalk Fabricated MS Structure required for false ceiling & Catwalk.
MS Understructure & Catwalk -Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. (Items Include use of scaffolding for height up to 10 Mtr)
Acoustical Carpet Floor - Supply & Installation of Acoustic Carpet Flooring 3-5mm thick carpet flooring shall meet the requirement of EN 1307 (shall have impact reduction ΔLw = approximately 19-20dB as per (ISO 717-2)). Flooring shall be decorative type catalogued product of approved design. The carpet shall meet the fire reaction as per bfl-s1. The Dimensions shall be as per the final approved design and site requirement. The Carpet shall have sound absorption of 0.10 as per ISO 354.
Auditorium Chair - Supplying & Fixing of Auditorium chairs with auto tipup, chair of 21" / 22" ctc in row with common PU with soft pad arm rest and chair fully upholstered in our standard foam backed polyester stretch fabric as directed by Engineer-In-Charge including writting pad and navigation name/number and cover for seat and back side etc complete.
Teak Wood Stage Flooring -Stage Floor-Providing & fixing teak wood planking 35 mm thick for stage flooring planed on both sides tongued & grooved along with necessary hardware & required hard wood scantling of size 75 x 50 mm framework to support, including consealed wiring for necessary electrical appliances to be used on stage etc including cleaning as per Architects detailed drawing & design etc complete.
Teakwood Skirting - Providing & fixing 12mm thick x 100 mm high first quality Solid Teakwood Skirting including base ply of 6 mm thk wherever necessary including Melamine polish shade to be match with the same matching shade of wooden flooring shade to all wood surfaces with 6mm groove between skirting & gyp/veneer to T.W. framework or T.W. panelling as per architect's detail drawing & design etc complete.
Booking Office Counter - providing & fixing counter for Booking Office of Size 12'6"x2'6" with 8 drawers 3 keybord trays & 2 shutters with foot rest. Counter is made in 19mm thik waterproof ISI creative, century make ply frame with shelves and drawer face 12mm glass of bevil edge on counters top supported by 3" long SS studes of 2" dia drawers side back bottom and total back of counter is manufactured with 12mm thick waterproof ISI creative / century make ply fixed with 20" telescopic drawers channels with including edges covered in teakwood lipping of 1" x 1/4" finished in 1mm thick laminate of EURO/ ROYAL TOUCH make and suede finish skirting made up of teakwood of section size 3"x2" the drawer shutters are fitted with maganetic ball catch of s.s 4" ss handles and 4"x1/2"x3/4| ss hings with necessary nails, screw , fevicol, abro tape, araldiat, required labour etc. and other S.S fastening fixtures as per requirement white zink polishing for teak wood lipping ,malamine polish for all exposed surfaces of plywood and teakwood etc. complete as per drawing and design approved (Mode of mesurment as per top Elevation) as per details & directed by the enginners incharge.
Stage Consol Unit: Working Counter - providing & fixing Working Counter Of Sizes 12'x2' for staff with 2 drawer 2 shuttered storage and 3 key board counters side top bottom footrest vertical partitions ,drawer front storage shutters are made in 19 mm thick waterproof ISI creative /century ply forming main frame. Drawer side, bottom, back, total back of counter, keyboard bottom are made in 12mm thik water proof ISI creative / century. Drawer and keyboard are fix with 20 inch telescopic drawer channels. shutters are fitted with 4"x1/2"x3/4" S.S hinges,4" SS handles, magenetic ball catch. Plywood edges are covered with 1"x1/4" teakwood lipping of required shape moulded counter is finished 1mm thick laminate EURO /ROYAL TOUCH make and suede finish teakwood section of size 3"x2" is used for required places as per drawing .All necessary nails ,screw, fevicol, araldiat, abro tape, necessary labour and other fastening fixtures in S.S to be used as per requirement. with providing white zink polishing for teak wood lipping melamine polish for all exposed surfaces of plywood and teakwood etc. complete. as per drawing and design and design approved (Mode of measurement as per top plan) as per details & directed by engineer in charge.
Letters for Slogan -Providing & fixing Letters for Slogan in Approved PVC foam Material of 8" and 5" sizes of approved shade ,colour ,front and fixing with good quality Adhesives as shown in the drawing and directed in charge including all type of taxes necessary scaffolding etc. complete. as per details & directed by Engineer -in- charge.
STAGE CRAFTS WORK & STAGE LIGHTS WORKS FOR AUDITORIUM
MAIN CURTAIN: Providing & Fixing of Main Curtain in Fire retardant Raymond's Velvet Cloth with lining cloth 50% gatherings Satin Border at bottom of 6" and 4” in two pieces (Centre Parting) size 45' x 16'
MAIN CURTAIN FRILL: Providing &. Fixing of main .Curtain Frill in same cloth as main Curtain 50% gatherings & Golden Fringe at Bottom of the Frill size 40' x4'
MID & BACK CURTAIN : Providing & Fixing of Mid & Back Curtain in Fire Retardant casement cloth stretched Fat of size 40' x 16'. Fixed to electrical hoisting mechanism.
CYCLORAMA: Providing & Fixing of cyclorama in Bombay Dyeing cloth of size 40' x 16' stretched flat. Fixed to Electrical hoisting mechanism.
FRILLS: Providing & Fixing of Frills in Drill cloth with 50% gatherings fixed to Grid in 25mm G.I. Pipe suspended by wire rope Size ( 45' X 4')
MIC BARS: Providing & Fixing of Mic Cars in G.I. pipe 400mm dia 'B' class length 40"
LIGHT BARS: Supplying & Fixing of Auditorium chairs with auto tipup, chair of 21" / 22" ctc in row with common PU with soft pad arm rest and chair fully upholstered in our standard foam backed polyester stretch fabric as directed by Engineer-In-Charge including writting pad and navigation name/number and cover for seat and back side etc complete. a) 40Fts. 3 on stage 1 FOH
LIGHT LADDERS: Providing & Fixing of light ladders between wings in 40mm G.I. Pipe ' B ' Class with two intermediate supports size 6' x 2'
Green Board
Providing & Fixing 2.4M X 1.2M Green Chalk board with powder coated aluminium frame, screw etc. complete as pre detail drawing
Internal Electrical work
Point wiring for independent plug in ISI mark HMS PVC conduit with 1.5 sq.mm (2+1E )FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW
For point wiring above 6 meters of length, 1 meter length or part thereof.
Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 10 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SWSWR/MCBDB
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB
Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Supplying & erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG- MA/BW
Supplying & erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG- MA/BW
Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No:WG-MA/CON.
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.
Supplying and erecting moon type decorative wall/ceiling mounted fixture including LED upto 12W circular/square type with opaque diffuser and electronic driver including bracket complete.
Supplying & erecting LED 20W tube light fitting (4 feet)with aluminium housing, heat sink, integrated HF electronic driver complete.
Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.
Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC
Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.
Supplying and erecting heavy duety hand dryer with SS #304 cover and Motor: Heavy duty brushed motor, 40,000 RPM Operates automatically with IR sensors The motor and heating coil protected with thermal fuse and thermal cut off
PART 1 - MSEDCL & EI LIASIONING WORK
Part No. 1; Liasioning charges with M.S.E.D.C.L. & Other Department from File Submission To Final Load Sanction Letter & Other work Related to Receive the MSEDCL Sanction Letter. Note - 1) Lumsum Rates Should Be Quated Including Overhead Charges. 2) The legal Charges (Cheque Payment ) Regarding Sanction letter to be paid by Shri Sai Baba Educational Campus. 3) The Approximate Final Power Requirement is 1) Connected Load - 381.65 KW Say 424 KVA 2) Contract Demand or Maximum Demand – 295.39 KVA 3) Proposed Transformer Capacity – 11 KV / 315 KVA – 1 No. 4) The Total Shri Sai Baba Educational Campus Will be the H.T. Consumer. Part No. 2 Charging Permissions for HT Cable, HT Panel, Transnformer, LT Panel etc. from MSEDCL & Electrical Inspector & Other Related Authorities. Note - 1) Lumsum Rates Should Be Quated Including Overhead Charges. 2) The legal Charges (Cheque Payment ) Regarding Charging Permissions to be paid by Shri Sai Baba Educational Campus. Part No. 3 High Rise Permissions From Electrical Inspector & Other Related Authorities. Note - 1) Lumsum Rates Should Be Quated Including Overhead Charges. 2) The legal Charges (Cheque Payment ) Regarding High Rise Permissions to be paid by Shri Sai Baba Educational Campus.
PART 2 - T/F, HT PANEL , LT PANEL INSTALLATION IN SUBSTATION ROOM - HT CABLE & Termination From Substation No. 1 HT Panel to Substation No. 2 HT Panel.
Supplying , erecting & terminating 3 x 95 sq. mm. aluminium 11 kV(E), XLPE armoured cable on wall/ceiling or laid in provided trench / pipe in an approved manner as per specification no. CB-HT
Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT
HT Panel In Substation Room No. 1, Location - In Substation Room No. 1 Supply , Testing & Commisining of 11 KV, 630A, 16/26 KA, Scada Base Motorised SF6 LBS + VCB Unit. The Panel is Indoor Type Incommer - SF6 LBS - 2 Nos. Outgoing - VCB - 2 Nos. For 11 KV/ 500 & 630 KVA Transformer With OLTC. With Short Circuit, Over Voltage, Under Voltage Earth Fault & all type of fault related to Transformer. Note :- 1) Specification should be as per MSEDCL Sanction Letter , 2) GA Dwg & Technical Specification should be approved before manufacture 3) Testing at Manufacture place before before dispatch in presence of Custmer representative, School Facility & Consultant. Preference No 1 – ABB. Preference No 2 – C&S.
HT Panel In Substation Room No. 2 , Location - In Substation Room No. 2: Supply , Testing & Commisining of 11 KV, 630A, 16/26 KA, Scada Base Motorised SF6 LBS + VCB Unit. The Panel is Indoor Type, Incommer - SF6 LBS - 1 No., Outgoing - VCB - 1 No. , For 11 KV/ 315 KVA Transformer With OLTC. With Short Circuit, Over Voltage, Under Voltage Earth Fault & all type of fault related to Transformer . Note :- 1) Specification should be as per MSEDCL Sanction Letter, 2) GA Dwg & Technical Specification should be approved before manufacture 3) Testing at Manufacture place before before dispatch in presence of Custmer representative, School Facility & Consultant. Preference No 1 – ABB., Preference No 2 – C&S..
Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 500 kVA, oil immersed and naturally cooled outdoor type, copper wound transformer, delta / star connected with additional neutral brought out on load side, temperature rise should not exceed 40oC by thermometer in oil and 45oC by the resistance in winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, with standard accessories complete with test certificate with losses below 1510 Watts at 50% load, 4300 Watts at 100% load as per IS:1180 - 2014 energy efficiency level II, with necessary permissions of Electrical Inspector, as per specification no SS- TR.
1000A ACB With C/O. L.T. Panel : Location - In Substation Room No. 2 :- Supply, Testing & Commissioning of Above ACB Panel. ( Indoor Type.) The Specifications of above panel is as per - MSEB Incommer - 1000A, 500V, FP, 65KA, Microprocessor Base ACB, EDO Type - 1 No, With R , Y , B Phase Indicating Lamp with MFM Meter With Short Cicuit, Overload & Earthfault Protection, DG Incommer - 1000A, 500V, FP, 65KA, Microprocessor Base ACB, EDO Type - 1 No , With R , Y , B Phase Indicating Lamp with MFM Meter With Short Cicuit, Overload & Earthfault Protection. Note :- Both of the above ACB's Should be Electrically Interlocked with each other. Outgoing - 1) 630A, 415V, TP, 36KA, TMD Type, MCCB - 1 No. With R, Y, B Phase Indicating Lamp & MFM Meter On Outgoing Side of MCCB. 2) 200A, 415V, TP, 36KA, TMD Type, MCCB - 2 Nos. With R, Y, B Phase Indicating Lamp & MFM Meter On Outgoing Side of MCCB. 3) 100A, 415V, TP, 36KA, Fix Type, MCCB - 2 No.With R, Y, B Phase Indicating Lamp & MFM Meter On Outgoing Side of MCCB. ( For Spare ) 4) 315A, 415V, TP, 36KA, Fix Type, MCCB With Capacitor Duty Contactor - 1 No. With R, Y, B Phase Indicating Lamp & MFM Meter On Outgoing Side of MCCB. ( For 225 KVAR APFC Panel ) Panel Note - * The Panel Should Be Mfg. From CPRI Approved Panel Manufacturer , * Panel With 14/16 SWG, 7 Tank Processed, Epoxy Powder Coated , * Cable Entry From Bottom & Out From Buttom Side Of Panel , * Cu. Busbars, Size Should Be Suitable For Carrying Current Of 1000A , * Each phase duly covered with Red, yellow, Blue and Black Colour Heat Shrink Sleeves , * The Panel Should be Indoor Type & Floor Mountable, * Name Tag Plates Should Be Provided As Per The Requirement , * Paint - Siemence Gray - Powder Coating. (RAL-7035), * The Schematic Drawing for the Above Panel should be get approved before manufacturing the Panel , * The SLD Is Enclosed For System Understanding, * The Panel should be Inspected & Tested at Manufacturing Place before dispatch At Site from Our Electrical Consultant. (Compulsary) * Make of Panel Switchgears Etc. - As per Enclosed Approved make list.
Supplying and erecting 250 kVAr, 440 V three phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC
Supplying, erecting & terminating XLPE armoured cable 3½ core 300 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non?corrosive bond in an approved manner with required joints As per specification no. EA-EP.
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EA-EP
PART 3 - DG SET INSTALLATION & RELEATED WORK
500 KVA ; Supplying, erecting and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising of meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG
Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 400 kVA upto 500 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GENAMF.
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
AUDITORIUM-VIDEO WALL & SPEEKAR SYSTEM
Supplying, Installing, Testing and Commissioning of 2.5mm Pixel Pitch Indoor active LED video wall, pixel density 160000/Sq Mtr, 3in 1 SMD GOB/COB/Coating on Surface. Size: 10 Mtr x 4 Mtr or higher with Power Distribution Unit, 4K video controller or processor with aluminium cabinet . complete including following specification. 1) Pixel Pitch ( mm)- 2.5mm or better. 2) Pixel Configuration-1R1G1B. 3)Pixel Density ( pixel/m2)-160000/Sq Mtr, 3in 1 SMD GOB/COB/Coating on Surface. All the used LED products should be from same OEM. SLD should be provided by OEM only. Structure drawing should be provided by OEM only. All used product should be available in public domain/website
Supplying, Installing, Testing and Commissioning of 42'' LED screen for greens rooms & Back stage.
Switcher/Scaler
Supplying, Installing, Testing and Commissioning of Supports HDMI signal up to 4K@60Hz 4:2:0, VGA signal up to 1920x1200@60 Hz Up to 4K@60Hz (4:2:0) Resolution The HDBT port supports 24 V 48 V PoC input and compatible with 48V PoH the switcher can be powered from the compatible HDBaseT receiver by the CATx cable, and it also supports 24V PoC output the transmission distance is up to 131ft/40m at 4K and 229ft/ 70m at 108 0P video by using a single CATx cable. etc. complete.
Supplying, Installing, Testing and Commissioning of 2x2 to 16x16 Modular 4K60 4:2:0 Multi–Format Managed Digital Matrix Switcher Dedicated Input / Output Modules Control - 10/100/1000M Ethernet Port 4U Chassis, 16x16 seamless modular matrix, RPSU, OSD, preset layouts etc. complete.
Supplying, Installing, Testing and Commissioning of 2 channel 4K@60 HDMI input card, supports embedded audio HDMI 2.0/HDCP 2.2 4:4:4 18Gbps HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant Four 18 G HDMI 2.0 video inputs support up to 4K@60 4:4:4 resolution Four 18 G HDMI 2.0 video outputs support up to 4K@60 4:4:4 resolution Four outputs can be individually scaled for 4K1080p De-embedded audio to Analog L/R and Coaxial ports output ARC audio return to the coaxial ports output only Built-in Web GUI for TCP/IP control Advanced EDID management supported Four methods of control: Front panel, RS-232, IR remote, and TCP/IP Compact design for easy and flexible installation
Supplying, Installing, Testing and Commissioning of 2 channel 4K@60 HDMI output card, supports embedded audio & analog audio, HDMI2.0/HDCP2.2 4:4:4 18Gbps HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant Four 18 G HDMI 2.0 video inputs support up to 4K@60 4:4:4 resolution Four 18 G HDMI 2.0 video outputs support up to 4K@60 4:4:4 resolution Four outputs can be individually scaled for 4K1080p De-embedded audio to Analog L/R and Coaxial ports output ARC audio return to the coaxial ports output only Built-in Web GUI for TCP/IP control Advanced EDID management supported Four methods of control: Front panel, RS-232, IR remote, and TCP/IP Compact design for easy and flexible installation
Supplying, Installing, Testing and Commissioning of up to 4K2K@50/60Hz (YUV4:4:4),4K2K @ 30Hz,1080P @ 120Hz, and 1080P 3D @ 60Hz 4K@60 (4:4:4) up to 70m, 1080P up to 100m with an extra ethernet port Supports HDMI Audio Formats of LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X POC (Power Over Cable) function is supported
Supplying, Installing, Testing and Commissioning of The FC-46xl is a High performance audio de-embed audio from the HDMI input or from the HDMI output audio return Channel to S/PDIF, TOSLINK and anolog audio simultaneously
Audio: Supply, installation, testing & Commissioning of Biamplified, 2 Way Progressive directivity Array loudspeaker set, with Individual Module Frequency Range of 55 Hz - 18 kHz or better & Continuous Power Handling of >=750W LF + 150W MF-HF. There shall be LF driver of at least 14" in each module, and 6 compression drivers of 2" voice coil or better in a CADS Manifold. The mid band crossover point of the speaker shall under 1kHz. The Loudspeaker shall have a Max. SPL (Peak) of >=127 dB or better for LF and 130dB for MF-HF. It should have suitable Drivers for LF and MF/HF with Horizontal dispersion pattern of 90º or better (with multiple waveguide options, Vertical dispersion of the array shall be 60 degrees or better. The Modules shall be of Baltic birch plywood construction with IP55 weather rating
Supply, Installation, Testing & Commissioning of minimum of Dual 8-inch or Higher, 3-way, triamp line-array Loudspeaker. HF Transducer-Dual, 8-inch woofer, 2.5-inch voice coil, LF Transducer-1.4-inch exit, 3-inch diaphragm, neodymium magnet compression driver, Frequency Range (-10 dB)- 62 Hz - 20 kHz, Frequency Response (±3 dB)- 68 Hz - 18 kHz, Nominal Impedance - HF: 16 ohms, MF: 16 ohms, LF: 16 ohms, Continuous Power Capacity - HF: 85 W, MF: 250 W, LF: 250 W, Maximum Output, Continuous / Peak (dB SPL at 1 m) - HF: 127 dB SPL / 133 dB SPL, MF: 122 dB SPL / 128 dB SPL, LF: 122 dB SPL / 128 dB SPL, Nominal Coverage - H: 140°, Enclosure Type-Ported, trapezoidal, Enclosure Material-15 mm birch plywood.
Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings.
Supply, installation, testing & Commissioning of OEM Couling plate for array modules offered above.
Supply, installation, testing & Commissioning of 18" arrayable subwoofer having a Freq. Range of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=135 db. The loudspeaker should have a nominal impedance: 4ohm or more and continuous AES Power Handling of 1250W or more. Shall be enclosed in Baltic birch plywood with standard Array rigging hardware for Cardioid as well as stacked position. The subwoofer shall have the same footprint as the main array speakers and shall have provision for suspending on top of main LR arrays.
Supply, Installation, Testing and Commissioning of Flyable Line array Subwoofer Module with Minimum 2x12"or better; Frequency response 32 Hz -107 Hz or better ; Max Peak SPL 135 dB, Impedance - 4Ohms, Power capacity- 1100watts or better, Construction in birch plywood, complete with standard accessories as per specifications
Supplying, Installing, Testing and Commissioning of Small array frame for use with WL3082 and WL212-sw; accommodates arrays of up to twelve (12) WL3082 or two (2) WL212-sw and eight (8) WL3082; can also be used in conjunction with EB3082 to construct arrays with WL212-sw suspended behind WL3082; available.
Supplying, Installing, Testing and Commissioning of Extension bar - used in conjunction with two (2) AF3082-S array frames allows arrays of WL212-sw subwoofers to be suspended behind arrays of WL3082 line array modules; available in black or white
Supply, installation, testing & Commissioning of Low profile High SPL all weather loudspeakers with 2x6" LF Driver & 1.5" or better VC compression driver; Frequency Range of 80 Hz - 16 kHz or better; Nominal Dispersion : 120°H x 60°V; Long term Power handling of 200 W or better; Sensitivity : 92 dB; Max SPL : 122dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for Distributed system applications. Standard wall bracket shall be included. Shall be rated for IP55 outdoor installations as per IEC 529 specs.
Supply, Installation, Testing & Commissioning of 10-inch, Full range, 2-Way Passive Loudspeaker. Frequency Range (-10 dB)-50 Hz – 20 kHz, Power capacity - 300W, Sensitivity-95 dB, Maximum Peak SPL-126dB, Coverage Angle-85° conical, LF Driver - 10-inch with 2.5-inch Voice Coil, HF Driver- 1-inch Exit, 1.75-inch voice coil, compression driver. Nominal Impedance-8Ω, Input Connections-2 × NL4, 1 × barrier strip, Enclosure-Trapezoidal, plywood, black texture paint finish, Perforated, powder-coated steel grille. Mounting and suspension-9 × M8 suspension points.
Supply, installation, testing & Commissioning of Low profile High SPL all weather Fill / Monitor loudspeakers with 8" LF Driver & 1.5" or better VC compression driver; Frequency Range of 80 Hz - 16 kHz or better; Nominal Dispersion : 90°H x 60°V with rotatable horn; Long term Power handling of 200 W or better; Sensitivity : 91 dB; Max SPL : 120dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for Distributed system applications. Standard wall bracket shall be included. Shall be rated for IP55 outdoor installations as per IEC 529 specs.
Supply, Installation, Testing & Commissioning of 2 Way Active Multi-Purpose Loudspeaker. Frequency Range (-10 dB) - 45 Hz to 20 kHz Maximum Peak SPL at 1m 132 dB.Maximum Continuous SPL at 1m 126 dB. Nominal Coverage Angle 75 Degree Axisymetric. Amplifer - 2000 Watts Peak Power Class D Amplifier. Transducers -12" LF Driver, 1.4" Titanium Diaphragm Compression Driver. 2 x XLR/Jack Combo Balanced Inputs , 1 x 3.5 mm Stereo TRS Input. 2 x XLR Loop Through Out & 1 x XLR Loop Through Out (Mix).Input A Switchable between Mic & Line, Input B Switchable between High-Z & Line.Built-in DSP with recallable Presets, Parametric EQ, Delay, Save & Recall of User Presets.Monochrome LCD Display.LED Indicator for Power (Front & Rear), 3 x Input Signal, Limiter Active.
Supply, installation, testing & Commissioning of Low profile High SPL all weather Fill / Monitor loudspeakers with 8" LF Driver & 1.5" or better VC compression driver; Frequency Range of 80 Hz - 16 kHz or better; Nominal Dispersion : 90°H x 60°V with rotatable horn; Long term Power handling of 200 W or better; Sensitivity : 91 dB; Max SPL : 120dB Peak; Nominal Impedance : 8Ω; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for Distributed system applications. Standard wall bracket shall be included. Shall be rated for IP55 outdoor installations as per IEC 529 specs.
Supply , installation , testing and commissioning of Compact Indoor type wall mount Music Loudspeaker: 2.25" twiddler driver, Free field Frequency range (-10dB) of 80Hz to 16kHz; Power handling of 64 Watt peak; Nominal dispersion of 170x160; Free field Sensitivity of 84 dB SPL and Max SPL of 103 dB SPL peak; Nominal Impedance 8 Ohms; Integral multi-tap Transformer with tap settings of 2/4/8/16 W @ 100V. with Powder-coated steel grille; Brackets with pitch/yaw adjustment included.
Supply, installation, testing & Comissioning of 8 channel class D Power amplifier with a Max Output Power of 8x500W@4/8 ohms, or bridged mode output power of 4 x 1000W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring. The Damping factor shall be >5000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Warranted for at least 5 years.
Supply, installation, testing & Comissioning of 4 channel class D Power amplifier with a Max Output Power of 4x500W@4/8 ohms, or bridged mode output power of 2 x 1000W @ 8 ohms/70/100V. 20Hz - 20 KHz, SNR of 101dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc with Ethernet Port for Network Control, programming and monitoring. The Damping factor shall be >5000. The amplifier shall implement Dual Voltage and Current feedback technology to provide power as per the load demand. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot. Warranted for at least 5 years.
Supply,installation, testing & Comissioning of Class D amplifier with 4 Channels of Load independent 300W outputs, LZ or HZ or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode; Dynamic range> 100dBA and THD <0.04% at rated output complete with standard accessories as required. Phoenix input and output connector. Shall include a Multichannel input compatible with Audio DSPs form the same manufacturer.
Supply,installation, testing & Comissioning of Class D amplifier with 4 Channels of Load independent 300W outputs, LZ or HZ or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode; Dynamic range> 100dBA and THD <0.04% at rated output complete with standard accessories as required. Phoenix input and output connector. Shall include a Multichannel input compatible with Audio DSPs form the same manufacturer.
Supply, Installation, Testing & Commissioning of 2 Channel, Class-D amplifier with inbuilt DSP. Per channel dynamic Power-600W@8Ω,800W@4Ω. Distortion < 1% THD, Input Sensitivity-1.2 Vrms, 3.9 Vrms, Maximum Voltage Gain- 36.5 dB, Frequency Response-20 Hz–20 kHz, Input Impedance-20 kΩ (balanced), 10 kΩ (unbalanced), Amplifier and Load Protection-Short circuit, open circuit, thermal, RF protection Load protected against DC faults, Front Panel Controls and Indicators-Rotary Encoders, Home, Enter, Exit buttons, Signal presence & Clip indicators
Supply, Installation, testing and commissioning of intregrated high impedence Class D Amplifier with output of 90 W @ 70/100 V ; Frequency Response - 60 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤1 % (at full rated power); Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (input to speaker output) ; Maximum Input Level : +10 dBV or better.
Supplying, Installing, Testing and Commissioning 10 Channel Audio DSP for Boundary Layer Mic
Supplying, Installing, Testing and Commissioning of 10-port network switch preconfigured for Q-SYS Audio, Video and Control with 8x PoE+ ports and 125 Watts PoE budget. Features advanced QoS and IGMP configuration to also support AES67 and \Dante within the same VLAN
Supplying, Installing, Testing and Commissioning of Wireless handheld mic
Supplying, Installing, Testing and Commissioning of Wireless lapel mic
Supplying, Installing, Testing and Commissioning of Wireless headworn mic
Supplying, Installing, Testing and Commissioning of 6-way wideband antenna splitter, 2-way antenna combiner for wireless systems with BNC-connector, 8V DC bias
Supplying, Installing, Testing and Commissioning of Passive omnidirectional wideband antenna,for wireless systems with BNC connector,incl. stand adaptor, Antenna mounting set
Supplying, Installing, Testing and Commissioning of Antenna mounting set for AT 71 and WA-ATDA, 3/8" thread, incl. 5/8" adapter
Supplying, Installing, Testing and Commissioning of Wideband antenna amplifier for wireless systems,with BNC connector, 5 dB/ 10 dB/ 15 dB switchable gain, feeding from antenna cable or external power supply
Supplying, Installing, Testing and Commissioning of BNC antenna cable, length 25 m, low attenuation, Aircell 7 cable
Supplying, Installing, Testing and Commissioning of Condenser gooseneck mic (cardioid), black, length 500 mm (18"), two flexible segments, programmable switch (PTT, PTM, ON/OFF), Braille-marking, switchable illuminated ring, switchable low cut filter,3-pin XLR male, windscreen included
Supplying, Installing, Testing and Commissioning of Flexible black shockmount fixture with turnable lid for all Classis microphones. 3-pin XLR cable socket for connecting a microphone cable. Black turnable lid to close the shockmount when unused.
Supplying, Installing, Testing and Commissioning of Boundary mic (semi-cardioid, condenser), black, with switchable filter (80/180 Hz), LED, integrated power supply, film-button (PTT, PTM, ON/OFF), Braille-marking and 3 m (9 ft) cable with 3 pin XLR connector
Supplying, Installing, Testing and Commissioning of Dynamic vocal microphone (cardioid) incl. bag and clamp
Supplying, Installing, Testing and Commissioning of Dynamic instrument microphone (cardioid)
Supplying, Installing, Testing and Commissioning ofconsisting of: 1x D70, 1x ST 99, 2x D57, 2x D58, 2x I53, incl. microphone clamps and rugged softbag with free space for additional microphones and accessories
Supply, Installation, Testing & Commissioning of audio, video and control processing system with 12 mic/line level analog audio inputs, 12 line level analog audio outputs, Up to 16 assignable and routeable AEC processor instances, 16 General Purpose Inputs (GPI) x16 General Purpose Outputs (GPO), Input Frequency Response-20Hz to 20kHz @ +21dBu,Input Impedance (balanced)-5K Ohms Nominal, Input Sensitivity Range (1dB Steps)--39 dBu min to +21 dBu max, A/D – D/A Converters - 24-bit, Sampling Rate-48kHz, Input Impedance (balanced)-5K ohms nominal, Output Dynamic Range-> 108dB,Inbuilt 16 Multitrack Player capacity,Front Panel monochrome OLED with capacitive touch buttons for settings. Control and integrate external devices using TCP/IP, RS232 and GPIO.
Supplying, Installing, Testing and Commissioning of\ Capture recording and streaming system: Supports up to Four Input Sources Concurrently, with Full HD Graphical User Interface Allows Ease of Use Easy Installation Ability to Produce Microfi¬lm Instantly, without Post-Production Distance Learning Backup Recorded Video Instantly Built-in 1TB Hard Drive Inputs:HDMI/ VGA/:2 channels Full HD network camera:4 channels Video processing comperession H.264/AVC Locally stored format MP4 Main output HDMI 1080p/60fps Disaply layouts Full screen/ picture-in-picture/ multi-channel split screen, up to nine layouts RS232 control external storage via USB, eSATA and a 5TB External recording storage to be provided
Supplying, Installing, Testing and Commissioning of PTZ Camera: dual color option for different kinds of settings, With professional noise reduction technology a clear image is delivered, Supports Wide Dynamic Range (WDR) to provide a vivid image even under backlighting Full HD 1080p with 60 frames per second 360 times variable zoom ratio (30x optical zoom with 12x digital zoom) Supports manual white balance function for a complex lighting environment 3G-SDI, DVI, Component, C-Video image output synchronously Maximum horizontal/ vertical speed of rotation: 300°/ sec Wide Pan/ Tilt/ Zoom mechanism: Horizontal viewing angle: -170° to +170°Tilting angle up to 90°, and down to -30°Compatible with major video conferencing and lecture capture codec joystick for Pan/Tilt/Zoom/Focus, Easy operation of versatile camera adjustments The RS-232C / RS422 communication interfaces allow long-distance communication
Supplying, Installing, Testing and Commissioning of PoE camera for AV-to-USB Bridging 20x Optical Zoom 60° horizontal field of view. For medium to large conference rooms. Includes Lan, 3G-SDI and HDMI
Supplying, Installing, Testing and Commissioning of Podium on Stage with Wall Plate for Laptop connectivity
Supplying, Installing, Testing and Commissioning of Document Camera
Supplying, Installing, Testing and Commissioning of Eight Port Wireless Router
Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table .
Supplying & erecting HDMI extender over RJ45 Ethernet Cable Cat5e/6/7 60M 200ft complete.
Supplying & installing Audio Video cable low voltage grade as per specification having 15mtr cord length with required connectors 3RCA X 3RCA CABLE complete.
Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 25 mtr cord length with male/female 19pin HDMI connectors as per requirements complete
Supply Installation Testing & commissioning of DVI to Highspeed Category 2 HDMI Convertors Supporting Full HD 1080p, 2K, and 4K video up to 30 ft lengths, 3D having 24k gold-plated 19-pin Type A connectors with High-flex CL3-rated jacket. The Convertor should be RoHS compliant complete.
Supplying and fixing 32 4U floor mount server Rack (Dimension-DxW - 800X1000 x1620mm) as per specification No. WG-NAS/RAK
STAGE LIGHTS WORK FOR AUDITORIUM
Main L.T.panel. Supply,erection,testing & commissioning specially designed, floor standing type L.T. panel made out of 14/16 swg CRCA sheet, duly powder coated, vermin proof,hinged doors,panel locks,floor mounting stand for panel. Incomer: 200 A TP MCCB with 25KA -1,Out going: 200 A TPN.Al.busbar-1, 40 A 4 Pole MCB 10 ka.-6 , 32 A 2 pole ELCB 100 MA -3, 10 A /20 A SPMCB 10 ka.-24, Volt meter,Ammeter,S.S.Indicating lamps-1etc. Complete.
Supplying, install and erecting 16 A/6 A modular socket & 16 A switch with mounting box,G.I.hardware.
Supplying, install and erecting 16 A/6 A bakelite plate socket on m.s. box with mounting bracket,G.I.hardware. made out of 18 swg CRCA sheet suitable for 1 No bakelite socket
Patch Panel: Supply,erection of floor mounting stand fabricated in two sections made of iron 35x35x5 mm.angles,closed from all 3 sides with removable covers and bottom cover made out of 18 swg CRCA sheet , hinged doors in two parts,panel locks, and arrangement to keep alu.rack on the top and a bakelite sheet 8 mm thick with 10 mm dia 72 Nos of holes for wires entry,earthing studs,painted/powder coated and G.I. Hardware and 12 Nos toggle switch, 84 Nos backelite 16 A/6 A socket mounted on m.s.plate.
Dimmer Panel.:- Supply,erection of dimmer power pack of (6 channels each x 5) 30 channels 2 kW/channel with 2 Nos 16 A./6 A . sockets/channel,indicating lights, 40 A 4 pole MCB for incomming supply,10 A SPMCB for outgoing supply fuse,cooling fan,and all mounted on alluminium rack , all sides closed with removable covers,wire entry holes,wire tages,castors/bushings.( 16 A/6 A 2 sockets x 30 channels=60 Nos)
Supplying, install and erecting of portable operating desk18 to72 channel consol with dual preset,2 cross fade master fader with flashing circuitry, black out switch 0-180 sec.group hiper fader for stage lights.
Supplying, install and erecting of portable operating desk for LED lights. pilot 2000 consol.
Supplying, install and erecting 10 A.SPMCB in encloser made out of 18 swg.CRCA sheet,hinged removable cover, knockouts 2" dia on all sides for wire entries, 72 ways neutral link,and earth link,earthing studs, and painted with approved paint/powder coated,to be fitted on wall /frame.
Supply fixing DMX splitter 8 way output for led lights.
Supply,laying in PVC.rigid ISI.conduit XLR control cable for connections to consol.
Supply,fixing 3 pin XLR connector male or female with soldering/crimping.
Supply Fixing DMX Socket 1x14 way with m.s. junction box.
Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying & erecting Flange type brass cable glands for 4 core 50 sq. mm. for XLPE armoured cable as per specification no. CB-GL
Supplying & erecting crimping type aluminium lugs for cable 50 sq. mm. complete as per specification no. CB-CL/AL
Supplying & erecting HMS P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC
Supplying and erecting UPVC reinforced flexible conduit 50 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.
Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.
Supplying & erecting mains with 4x6 sq.mm. and earth wire 4 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 25mm dia, as per specification No: WG-MA/PC.
Supplying & erecting mains with 3x2.5 sq.mm. FRLSH copper wire, in 16gauge 20 mm dia. rigid steel conduits, with continuous GI earth wire of 2.5sq.mm. as per specification No: WG-MA/MC
Supply Fixing Stage Lighting fittings:- a. 1000 watt halogen frasnel spot lights complete with 6" dia lense,G x 9.5 base[MR]
b. Supplying, install and erecting1000 watt mini halogen flood light with integral 4 leaf barndoor,R7s base double ended ,dicast al.'c'clamp with safety chain ,1000 watt linear halogen lamp.[MR-1000 FLD]
c. Supplying, install and erecting1000 watt PARCAN made out of spun alluminium provided with G.16 d.base lamp socket,lamp retaining ring, power cord,filter frame, dicast al. 'c' clamp & 1000 watt halogen lamp.(MR PARCAN-64)
d. Supplying, install and erecting1000 single lens profile spot light with plano convex ldns,Gx9.5 base lamp base,dicast al.'c'clamp with safety chain and 1000 watt Gx9.5 base halogen lamp (PS-1001 PC)[MR]
e. Supplying, install and erecting 2000 watt high effeciency spot light with 10" dia fresnel lens, GY-16 base lamp socket, 2000 watt halogen lamp,dicast al.'c'clamp with safety chain (CI-2010HG)[MR] OR 200 watt LED frasnel spot light with led display complete with 6" dia lense,
f. Supplying, install and erecting LED par 54X3w RGBW [SPRO]Lamp power:54x3W RGBW LED(12R+18G+18B+6W); Power supply:AC 100-230 V, 50-60 Hz; Beam angle:25 Deg (15, 45 Deg Optional); Control:DMX 512 / RDM / Manual
g. Supplying, install and erecting Moving head DMX 575 Sharpy[SPRO]Cool White Beam Light Moving Head Light (575W 10 DMX Channel) ; Type Of Light, Beam Light ; Wattage, Yes ; Lighting Color, Cool White ; Body Material, Aluminium.
h. Supplying, install and erecting Wall bracket for solar fitting.Solar Universe Shelf Brackets ; Impex 80 40 MM x 40 MM Shelf Bracket. Iron ; ASHRAFI Iron F-Bracket 6 Mm Shelf Bracket. Steel ; Protex ALUMINIUM L
i. Supplying, install and erecting 3 section heavy duty floor mounting stand std4 MX Universal Heavy Duty Floor Mount LCD Stand for TFT Plasma LCD Led TV - Screen Size 26-55'' Fix Tilt Floor Mount/Bracket/Stand Load
j. Supplying, install and erecting Colour papers Within this paper, auditorium basic formats, seating arrangement, audience to stage rela-tionship as design factors were studied in detail.
k. Supplying, install and erecting LED par 54X3w Warmwhit colour [SPRO] S PRO S019 3 Watt X 60 LED Light ; Lighting Color, Multi Light ; Body Material, Metal ; Brand, s pro ; Input Voltage, 240 ; Battery Type
l. Supplying, install and erecting LED WASH 24X8w RGBW [SPRO] 150W RGBW LED wash panel gives soft and perfect color homogeneity on light output. - Integrated dimmer enables instant dimming from 0 to 100%
Supplying, install and erecting m1500W Profoag Machine with Remote[SPRO]
Supply fixing 1 No XLR Female socket fixed on m.s. box power coated.[MX]
a.. Supply,erection of earthihg GI pipe size 50 mm.x 1mtr deep 20 kg chemical powder.C.I.cover, chamber with G..I watering pipe with funnel,G.I. Bolts, nuts,washers,complete with digging and refilling of earth pit.
b. Supply,erection of 16 sq.mm. Insulated copper conductor wire in pipe from plate to panel apprx.
c. Supply erection of test link made with 25 x 4 mm copper strip with G.I.hardware
Supplying, install and erecting caution board
Supply,fixing , SPMCB in encloser made out of 18 swg.CRCA sheet,hinged double door cover, Spmcb db 16 way-1 NOS. Dpmcb 40A-1 NOS. Spmcb 6/25A-12 NOS.
Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia as per specification No: WG-MA/PC
Supply,laying 6sqmm x 3core armade copper multi standered cable [dimmer to control room]
ELECTRIC HOISTING MECHANISM : Providing & Fixing of hoisting Mechanism for cover, Mid & Back Curtain, Cycolorama, FOH, with following details. a. 2 H.P. 3 Phase motor (Navjyot make) b. Gear Box 40:1 (Kisco) c. 100mm Pulley Set with Bearings on way two way, three way, four way,d. Guide Pulley sets, e. 6mm steel wire rope. Appox 400ft, f. 75mm x 50mm M.S. Stand , g. M.S. Drum 9" dia, h. Limit switches with Plate & Rods, i. Electric wire 2.5 sq.mm 8 core, j. Panel Board with sicmens/L&T Contactors, k. Pedestal Bearing 2 Nos., l. G.I. Pipe 25mm etc. all complete.
MANUAL HOISTING MECHANISM :SITC of Manual Mechanism for lighting of Frills, Curtains as follows: a. 25:1 Gear Box ( Elecon ), b. 5 Ways Rollers, c.5m Steel Wire Rope 150 Mtrs, d.100mm Pulley Sets one way, two way, three way, four way & five way, e. Guide Pulley Sets, f. Pedestal Bearings: 2 Nos, g. M.S. Angle Stand, h, Locking System & Handle, i. G.I. Pipe25mm etc. complete.
Passive
Supply , installation, testing and commissioning of Cat 6 A Patch Cords 1 Mtr, Gray/Green/Yellow/Red colour.
Supply , installation, testing and commissioning of Cat 6 A Patch Cords 2 Mtr, Gray/Green/Yellow/Red colour.
Supply , installation, testing and commissioning of Cat 6 A Patch Cords 3 Mtr, Gray/Green/Yellow/Red colour.
PUBLIC ANNOUNCEMENT SYSTEM
SITC of Two way ceiling speaker with 114 mm [4.5-inch] weather resistant paper cone. Frequency Range: 62 Hz - 18 kHz, Wattage: 6watts, Sensitivity: 93dB, Coverage: 140° conical, Max Peak SPL: 107dB, Impedance: 8 Ohms, Transformer Taps: 70 V: 6, 3, 1.5, 0.75 watts and 8 ohm bypass. 100V: 6, 3, 1.5 watts and 8 ohm bypass Enclosure Material: Painted ABS polymer. Grille Fixture Type: Powder coated steel. Colour: White
SITC of Page Station with 16 Buttons command keypad and Gooseneck mic.Capacitive touch, programmable keypad and 240 x 64 graphics LCD for flexible customization,Second microphone input and GPIO allow one Page Station to serve two locations,Dual Ethernet connections support network redundancy,Audio Channels-2 line inputs, 1 line output,Power-IEEE 802.3af power over Ethernet (POE) or +24V DC,Frequency Response- 20 Hz - 20 kHz (max)-± 0.5 dB,20 Hz - 20 kHz (typical)- ± 0.2 dB, Input Impedance(Balanced/Unbalanced)-10k ohms
SITC of Digital Signal Processor with 8 mic/line level analog audio inputs, 8 line level analog audio outputs, 8 Flex Channel mic/line level analog audio inputs or outputs, Up to 16 assignable and routeable AEC processor instances, 16 General Purpose Inputs (GPI) x16 General Purpose Outputs (GPO), Input Frequency Response-20Hz to 20kHz @ +21dBu,Input Impedance (balanced)-5K Ohms Nominal, Input Sensitivity Range (1dB Steps)--39 dBu min to +21 dBu max, A/D – D/A Converters - 24-bit, Sampling Rate-48kHz, Input Impedance (balanced)-5K ohms nominal, Output Dynamic Range-> 108dB,Inbuilt 16 Multitrack Player capacity,Front Panel monochrome OLED with capacitive touch buttons for settings. Control and integrate external devices using TCP/IP, RS232 and GPIO.
SITC of User Control Interface Deployment Software License for above mentioned Digital Signal processor, Should be Perpetual and installed on DSP processor. Should support multiple User Control Interfaces simulataneously
SITC of User Control Interface Deployment Software License for above mentioned Digital Signal processor, Should be Perpetual and installed on DSP processor. Should support control of multiple devices simutaneously via Ethernet, RS232 and IR.
SITC of Hardware Connector & other Accessories
Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.
Sound Reinforcement System-Green Rooms & Rehersal Rooms
SITC of 2 way Dual 3.5 inch 75w Surface Mount Speaker 4.5" weather treated paper cone woofer, 1" / 25 mm voice-coil 0.75" silk dome tweeter / 0.75" voice coil, horn loaded (Green Rooms)
SITC of Speaker stand for speaker
SITC of rack mount BEHR 12 channel Analog Audio Mixer
SITC of ePodium Providing & Supplying unmatched Interactivity among various digital devices with its slim design podium which allows you to communicate with your audiences more effectively. Includes Body with visualiser Tray, 21.5 Inches Touch Screen Monitor, 1 lapel, 1 Handheld, 1 Gooseneck Mic, Amplifier, Speaker Pair and Full Fledge Controller with 5 RS-232 ports, 2 IR/RS-232, 10 Relay Control, 7 inches Touchpad.
Motorised Intermediate Curtain
Supply and fixing of fold up Curtain with 2mm Thick MS tube shaft of size 50mm diameter including bearing and hardware accessories, heavy
Supply stitching & fixing of Decorative Cotton Fabric for fold up Curtain with eyelets other accessories
Supply & fixing of Single Motor Control centre with phase reversal & safety protection
Providing and installation of Compacted size, laser digital projector for meeting room and classromm having 5k 5000 ANSI Lumens, Contrast Ratio 20,000:1, Zoom Ratio is 1.5X , 3D ready, 3D Formats supported, Keypad Lock, Speakers 10W X1, Noise Level 35DB/29db (normal/eco. Mode) resolution ratio 1920 X 1200 @ 60 hz , Optional Edge Blend/Warping Solution HDMI port, USB port, AV port, computer port with spring loaded white screen connected with necessary mains, required switchgears and maintaining the same during the function including dismantling.
HI SIDE EQUIPMENT OF AUDITORIUM
Variable Refrigerant Flow Air-conditioning System Outdoor Units
Supplying, erecting, testing and commissioning 18 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
Supplying, erecting, testing and commissioning 24 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete
Supplying, erecting, testing and commissioning 22 HP, VRF / VRV air conditioning system, out door unit (ODU)complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete
Supplying, erecting, testing and commissioning 20 HP, VRF / VRV air conditioning system, out door unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete.
VRF Indoor Unt - Ductable Type Unit: Supply, installation, testing and commissioning of VRV /VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 8.0TR ( 3200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.
Supply, installation, testing and commissioning of VRV / VRF based ductable type, high static indoor unit (IDU) having nominal cooling capacity of 2.5TR ( 980 cfm )to 3.0TR ( 1200 cfm ) having EER as per BEE standards and specifications with evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. having anti-corrosive coating suitable for coastal area, with suitable ceiling suspension arrangement, with an electronic control console and any additional refrigerant and oil charge as per requirement during installation connected with the system complete.
VRF Indoor Unit - Four Way Cassette Unit : Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 2.0TR ( 618 cfm ) / 2.3TR ( 671 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.
Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indor unit (IDU) compact / standard size of nominal cooling capacity 1.5TR ( 512 cfm ) / 1.8TR ( 618 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete.
Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.
Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.8TR (594 cfm) to 2.2TR (655 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete.
VRF Indoor Remote Controls for Hi Wall, Cassette & Ductable Units : Supplying, erecting, testing and commissioning centralised programmable remote contol panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangement to integrate with provided fire alarm system
Supplying and installation of high pressure grade required size copper connection Y or T- Joints / refnet for liquid and suction line complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV / VRF air conditioning system
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping of suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV / VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations complete with OEM standards of VRV / VRF air conditioning system.
Supply, installation, testing and commissioning of condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam.SITC of drain pipe along with 6 mm thk insulation 65 MM
Supply, installation, testing and commissioning of condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. SITC of drain pipe along with 6 mm thk insulation 50 MM
Supply, installation, testing and commissioning of HMS PVC conduit 32 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.
Supply, installation, testing and commissioning of HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.
Supply, installation, testing and commissioning of elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater system.
Supply, installation, testing and commissioning of elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 32 mm for solar water heater system.
Supply, installation, testing and commissioning of vaccumising the airconditioner system to 200 micron and charging with R-410A/R32 refrigerant for air conditioning unit.
Supply, installation, testing and commissioning of Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Supply, installation, testing and commissioning of Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
Supply, installation, testing and commissioning of of MS Stand for Outdoor Units. MS stand to be painted with red oxide & enamel paint.
Supplying, erecting, testing, and commissioning of digital active 30 A harmonic filter cum power conditioner, with digital closed loop active filter with source current sensing, 32 bit digital signal processing with less than 1 milli second response time, high speed IGBTs in power circuit with necessary CTs to be mounted on existing cable/bus and shunted to supply along with digital display showing voltage, current, frequency, kW, kVA, kVAR, PF, VTHD, ITHD and waveform with alarm for 3 phase 4 wire system as per specification No. CP-ED/DAHF 1. Panel should be of outdoor application 2. Type Wall mounted/Floor mounted as per requirement 3. Incomer should be MCCB of suitable capacity 4. Along with KWH meter for incomer, RYB Indication, Volt meter, Ameter, Seletor switch, bus bar 5. Outgoing isolater i.e. ELMCB with suitable rating & leakage current of 300 MAmp for individual ODU nos. ODU Panel will be IP 65 suitable for outdoor applicaion etc. complete.
Supplying, erecting & terminating XLPE armoured cable 3½core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.
Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU
Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 500 mm width & 20 mm height complete with necessary hardware in approved manner.
LOW SIDE EQUIPMENT OF AUDITORIUM
Supply, installation, testing & commissioning of Factory Built, Ceiling Suspended/Floor Mounted chilled water based double skin type Air Handling Units made of 40 mm thk. Panels consisting of hot dip G.I. Casing of thickness of 0.6 mm pre - coated and pre -plastisised GI for outer skin and 0.6 mm plain GI for Inner Skin encasing with 40mm polyurethane foam insulation having a density of 40 Kg. / CuM factory injected between them by injection moulding machine, complete with Direct drive Plug type backward curve fan section with aerofoil shape with VFD suitable for static pressure as detailed below, cooling coil section with hydrophilic Aluminum finned copper tube cooling coil, filter sections with 50 mm thk. air pre -filters, package with TEFC motor suitable for operation on 415 (+/-) 10%, 50 Hz, A.C Supply insulated drain pan and drain connections. Casing - Double Skin Casing of thermal break profile with 40mm thick with 0.6mm inner and outer skins with insulated by PUF. Coil - The coil shall be of Copper construction with Aluminum fins. The drain pan shall be of SS. Fan - Direct drive Plug type backward curve fan with aerofoil designed shape section with VFD suitable for static pressure as detailed below. The motor shall be IE2 efficiency suitable for 3 phase supply. The impellers shall be corrosion resistant.Filter - Each unit shall be provided with a factory assembled filter section containing washable synthetic type air filters having GI frame. Filter media and frame shall be rust proof and corrosion resistant.The filter shall have minimum 90% efficiency down to 10 microns. Dampers - Low leakage double skin Aluminum dampers shall be provided. EU-4 Fresh Air Filter EU-4 Pre filter. Foundation support for AHU in clients scope. (RCC blocks).
DUCTING: Supply,Installation and Testing of CNC machine fabricated/ Site fabricated G.S.S. rectangular Ducting as per specification complete with supports, with GI rivets,nut-bolts, TDF flanges, neoprene gaskets duly installed between flanges.
Supplying and erecting GI sheet 0.6 mm (24 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.
Supplying and erecting GI sheet 1.25 mm (18 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint
Supplying and erecting GI sheet 1 mm (20 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.
Supplying and erecting GI sheet 0.8 mm (22 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint
Supporting work for ducting mentioned above
Supply, Installation, Testing & Commissioning of preinsulated flexible duct with end clamps and Aluminum foil on both side as required in various sizes as below. The duct shall fire retardant UL standard approved. 100 NB Dia
Supply, Installation, Testing & Commissioning of preinsulated flexible duct with end clamps and Aluminum foil on both side as required in various sizes as below. The duct shall fire retardant UL standard approved 200 NB Dia
Supply, Installation, Testing & Commissioning of preinsulated flexible duct with end clamps and Aluminum foil on both side as required in various sizes as below. The duct shall fire retardant UL standard approved 300 NB Dia
Supply, Installation, Testing & Commissioning of preinsulated flexible duct with end clamps and Aluminum foil on both side as required in various sizes as below. The duct shall fire retardant UL standard approved 400 NB Dia
Supply air Ducting with 19 mm thick Insulation : Supply and installation of crosslinked polyurethene .The insulation used shall be with aluminum tape in all corners of the same make that of insulation. The insulation shall applied with suitable adhesive, Before appling insulation surface should be cleaned and solution will be applied on duct surface and insulation both
Return air Ducting with 13 mm thick Insulation: Supply and installation of crosslinked polyurethene .The insulation used shall be with aluminum tape in all corners of the same make that of insulation. The insulation shall applied with suitable adhesive, Before appling insulation surface should be cleaned and solution will be applied on duct surface and insulation both
Supply, Installation, Testing & Commissioning of Accoustic Insulation of duct with 19 mm thick Open Cell Nitrile Rubber with Anti Microbial Tratement & of Class '1' stuck inside the duct using rubber adhesives.(F.M. Approved). Density of 140 - 180 Kg/m3.
UNDERDECK INSULATION : Providing and applying of accoustic insulation for air ducts with 25 mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheets complete.
Supply and Installation of Extruded Aluminium removable core type SA Diffuser with damper for following neck sizes. With VCD 450X450 mm
Supply and Installation of Extruded Aluminium removable core type RA Diffuser with damper for following neck sizes, Without VCD .450X450 mm
Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45 degree.
Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete
Supply, Installation, Testing and Commissioning of Fire damper with fusible link with limit switch and indicator to show the open/close position). The blades and frame shall be of minimum 16 G thickness and fire damper shall be of atleast 1-1/2 or 2 hour fire rated as per UL555/1995 tested by CBRI. Fire damper fusible link type.
Supply, Installation, testing and Commissioning of Butterfly type volume control dampers with heavy gauge galvanised sheet casing, frame at both ends ,blades coupled with linkage and frame with square spindle, adjustable blades mounted on nylon bushes. 400 NB Dia
Supply, Installation, testing and Commissioning Drain piping, U PVC pipe with 9 mm nitrile rubber insulation. 40 mm
Supply, Installation, testing and Commissioning Duct temperature sensor. PT-100
3000 CFM Exhaust Air FAN: Supply, Installation, Testing & Commissioning of Cabinet type Inline Fans with DIDW forward cureved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters.
1000 CFM Exhaust Air FAN : Supply, Installation, Testing & Commissioning of Cabinet type Inline Fans with DIDW forward cureved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters.
2000 CFM Fresh Air Air FAN: Supply, Installation, Testing & Commissioning of Cabinet type Inline Fans with DIDW forward cureved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters.
Electrical panel - AHU no. 1,2
Electrical panel - AHU no. 3,4
Electrical Panel - AHU nos 5,6,7,8
Provide and Fixing Saibaba Mural including clay moulding, scaffolding, F.R.P Casting, Joint Filling and Finshing, Coloring, Weather Proof Coating including all Labour, tool, equipments and trasporation, loading, unloading, fixing and installing in proper position as directed by engineer-In-incharge and aprroved by architect. Mural Design should be sumited by contractor for Aprroval of Client and Architect before Execution. Size - 6.7 M X 6.0 M
Harsh Constructions Pvt Ltd
JAYANT K FURNISHERS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid