Improvement works along with other allied works to the 110/11KV Thirumangalam SS and AEE/Thirumangalam office building in Thirumangaalam TNEB campus pertaining to Thirumangalam Division of Madurai EDC

Improvement works along with other allied works to the 110/11KV Thirumangalam SS and AEE/Thirumangalam office building in Thirumangaalam TNEB campus pertaining to Thirumangalam Division of Madurai EDC.

Dismantling the damaged existing terrace tiles flooring with weathering course without damaging the roof slab and removing of excess concrete wastages from the site as directed by the site engineer including cost of all materials, labour, lead, lift, etc., complete.

Providing weathering course with good quality of pressed tiles 20cm x 20cm x 2cm using CM 1:3 mix mixed with water proofing compound and pointed with the same mortor including cost of all materials, curing, labour, lead, lift etc., complete.

Pointing the pressed terrace tiles using CM 1:3 mix with water proofing compound including cost of all materials, labour, lead, lift etc., complete.

Dismantling the existing Brick Masonry in cement mortar walls under 3m high and removing of excess wastages from the site as directed by the site engineer including cost of all materials, labour, lead, lift, etc., complete.

Brick work in CM 1:5 using II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4 " including cost of all materials, labour, lead, lift, curing, etc., complete. (As instructed by the Engineer at site)

Chipping of concrete and roughening the surface of damaged ceiling, damaged concrete from Lintel, roof level, Plinth level, flooring patchwork etc., and removing of excess concrete wastages from office premises as directed by the site engineer and redo the same with Plastering using CM 1:3 mix 20mm thick with water proofing compound and adhesive chemicals/compounds including cost of all materials, curing, labour, lead, lift, etc., complete.

Plastering with CM 1:3 mix 12 mm thick for ceiling, sunshade etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Dismantling of windows including removal of frames, hinges and fastening and removing of excess concrete wastages from yard premises as directed by the site engineer including cost of all labours, materials, lead, lift, etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top including necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials, labour charges, etc., complete.

Supplying, fabricating and fixing in position Aluminium fixed partition using 63.50x38.10x2mm @1.127 kg/m Alu.section at 900mm C/C in vertical direction and 1300mm @ C/C at horizontal direction with necessary rubber beadings Alu.clips, of size 17.27x17.15x1.40mm@ 0.175 kg/m and using 12 mm thick both side laminated with 1 side Melamine finish including cost of all materilas, all necessary aluminium fittings such as glazing clips, cleats, screws, rubber beadings, labours, power consumptions required for fabrications, drilling holes in RCC column, slab, masonry walls wherever necessary with powerdrills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS 1868/1962 for an avereage abiduc film thickness of 15 microns etc. complete.

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator) including cost of all materials, labour charges, T&P, lead, lift, etc., complete. (SD 16)

Supplying and fixing 20W 4 Feet LED Fitting with LED including cost of all materials, labour charges, T&P, lead, lift, etc., complete.

Supplying and fixing of 375mm (15") sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall including cost of all materials, labour, lift, etc., complete.

Supplying and fixing of 1400mm sweep AC ceiling fan with regulator with 300mm down rod on the exisitng clamps of crompton /rally/ orient including cost of all materials lead, lift etc., complete. (SD 109)

Supply and fixing of MS chequered plate for closing cable duct inside control room including cost of all materials, labour charges, T&P, lead, lift, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu